ToolPath

Win32 et 64, Français

IntelliCAM

ToolPath provides several functions to solve the problem of calculation of the movement of the tool centre point starting from a geometric figure that you want to wrap around or empty.

Historique des versions

Instructions d'utilisation générales

The commands tp_offset_xy, tp_offset_z, tp_pocket and tp_edge can be worked on the selected polylines.

Please go through each command details to know how to use the commands.

Captures d'écran

Commandes

Icône du ruban/de la barre d'outils	Commande	Description de la commande
	TP_OFFSET_Z	It creates, to the left or to the right side of the selected polyline, the tool radius compensation path. The final depth of the output path can be achieved in one or more Z movements. Inputs and outputs can be added to the final path.
	TP_OFFSET_XY	It creates, to the left or to the right side of the selected polyline, the tool radius compensation path. The path can be constructed by a variable number of approaching movements in the plane of the selected polyline.
	TP_POCKET	It creates, from a selected closed polyline, the tool centre point path that empties the area inscribed in the polyline. The final route includes a boundary movement and internal routes with three possible ways; linear, zigzag or concentric. In the area you can insert islands that are respected and not emptied.
	TP_EDGE	TP_EDGE creates, from a selected base polyline and a shape polyline, the tool centre point path that edges the base along the shape polyline. The shape_polyline must be monotone in x direction. The final route includes a boundary movement with three dimensions.
	TP_ACTIVATION	It executes the activation program.