Numbering

Win32 és 64, Magyar

A>V>C>

Name the drawing objects as sequential numbers. Save time when working with plugins Lay, Sawing Table, Mark, Smart Leader.

Verziótörténet

Általános utasítások a használattal kapcsolatban

The numbering command works in the same way as the Data Table command. It extracts data from selected drawing objects, creates a table, groups and sorts this table, and only then writes the row numbers of this table to the Name (or Kind, or Info) of the object. The only difference with the Data Table is that the resulting table is not saved anywhere. But the numbers remain in the specified property of the object and can be used by all A>V>C> commands.

The program can use drawing objects selected before calling the AvcNum command. In this case, you will not see any prompts or options. If nothing is selected, the program will ask you to select objects. You can select one or several viewports on the sheet - the program will process all objects visible in them.

Pay attention to the command line before choosing the details - the current numbering settings will be indicated there, including the start number.

The objects you select can be discarded by filters. Do not worry if annotations and other unnecessary objects fall into the selection frame - the program will work only with suitable objects specified in the filtering conditions.

After running the program, the selection can be saved - use the A>V>C> Common Options.

In the selection prompt, you will see the command options:

SwitchStyle: Quickly switch between presets by number.
TUNE: Opens the program settings dialog

Then the program starts working:

Compiles a list of objects to be processed. These will be the objects of the drawing you have selected, as well as objects extracted from blocks (if configured to extract from blocks).
Discards inappropriate objects according to the filtering settings. If the program writes to the command line that there is no suitable object, then just change the filtering conditions.
If the command is configured to process solids, then the metric update procedure will be invoked for each solid. In the process of work, the program outputs to the command line the obtained sizes of solids.
Retrieves the object properties for all substitutions for the grouping and for all configured sort columns.
Concatenates identical strings (if required). Moreover, the program can check the geometric differences of objects and not combine them together, even when all the columns are the same.
Groups and sorts objects.
Substitutes object properties and table row numbers into the numbering template and store the resulting string in the specified Name (or Kind, or Info) property.

Watch the console - all program messages are displayed there.

Képernyőfelvételek

Parancsok

Szalag-/eszköztárikon	Parancs	Parancs leírása
	SNN	Select any objects and call SNN. The command will select only objects without name.
	AVCNum	Give the names to solids as ordered numbers

Telepítés/eltávolítás

The installer that ran when you downloaded this app/plug-in from the Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart the Autodesk product to activate the app/plug-in. To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8.1/10/11) and uninstall as you would any other application from your system.

További információk

Ismert problémák

Kapcsolattartás

Vállalat neve: A>V>C>

Vállalat URL-címe: https://sites.google.com/site/avcplugins/

Támogatás elérhetősége: avc.programming@gmail.com

Szerző/vállalat információi

A>V>C>

Támogatási információk

Support is provided by e-mail avc.programming@gmail.com

You can ask any questions about the work of A>V>C> programs, their installation and configuration, optimization of the work of engineers, and setting up business processes in the exhibition business. Help is provided to all users, regardless of whether they made a donation or not. Any suggestions and comments are welcome for further improvement of the programs.

The main method of communication is e-mail. You can write in any language. If you do not write in English, then write in short, simple but complete sentences without abbreviations and without special terms.

Do not forget to attach the problem dwg-file to the letter.

Telegram: @avc_programming

WhatsApp: A V C Programming

Facebook

Twitter

Linked-In

Verziótörténet

Verziószám	Verzió leírása
2024.09.04	Now it can number texts, dimensions, block attributes and multy leaders. If the numbering destination is "Name or text", then for texts, dimensions, attributes and multy leaders the number is now written not to the invisible Name of the object, but to its visible text. Third numbering style corrected for text numbering. The program writes clear error messages to the command line if the object is not numbered. You can now extract data from objects visible in ModeDoc=ViewBase views. New data source setting - "Select view or viewport". This is done specifically for ModelDoc views. You can select the data source in the settings (Model, all sheet viewports, other drawings) and not select objects when calling the command. You can extract data from many drawings at once. Options form: The column list automatically adjusts its height. Fixed: When searching for identical objects by appearance, Visibility, Line Weight, Print Style, and Transparency were not compared.
2024.03.03	Autodesk® AutoCAD® 2025 compatibility.
2023.11.01	All updates for November 2023.
2023.09.05	All updates on September 2023
2021.08.00	Substitutions: New formats for integer ROMAN - Roman numerals, ALPHABET - letters in the English alphabet, CYRILLIC - letters in the Russian alphabet, X - hexadecimal number. Substitutions: New formats for floating point numbers depending on the regional settings of Windows: G, E, F, P, C, N, D, R, X (like C# double formats). Substitutions: Now 0 is always displayed as 0 and not as an empty string, whatever the formatting. Substitutions: When the substitution value is unknown, then "n/a" is always displayed (previously, in some cases, an empty string was displayed) New substitutions: - Outline rectangle size for all drawing objects: extentsx, extentsy, extentsz - Outline rectangle coordinates for all drawing objects: extminx, extminy, extminz and extmaxx, extmaxy, extmaxz - Coordinates in current User Coordinat System: basexucs, baseyucs, basezucs - Endpoint and Midpoints coordinates for all curves: endx,endy,endz, minx, midy, midz - Endpoint and Midpoints in current User Coordinat System: endxucs, endyucs, endzucs, minxucs, midyucs, midzucs AvcNum: The numbering command has been completely redesigned. - Any drawing objects except blocks are now numbered. - Writes data not only to Name, but also to Kind or Info. - Forms of numbers can now be Roman numerals and letters of the Russian alphabet. - Can substitute any properties of the drawing object, not just the line number. Including, you can substitute the name of the owner block. - Has separate styles. Not use the LAY style. - Filtering of objects is configured. - Sorting (numbering order) is configured. AvcOptions: New Numbering tab.
2020.2	Added 2022 support (No change in version number).
2019.3.4	Compatible with AutoCAD 2020 New activation system
2018.3	Compatible with AutoCAD 2019 Default options changed Fixed error of counting the number of mirror solids Improved compatibility with settings from previous versions The same numbering procedure is used as in the Sawing Table and its current sorting settings Italian localization of console messages The settings dialog stores a list of previously used formats Checking the old solid name on the number takes into account that the format can contain text strings The "mirrored" property is recorded Mirrored solids are now given the same numbers Fixed: solids were sometimes mistakenly considered different
2017.3	• Compatible with AutoCAD 2019 • Updated Tecnology property for Solid • Decreased accuracy of asymmetry of solid • New version numbering • Fixed: solids were sometimes mistakenly considered different • New activation window
2,0	AutoCAD 2017 compatibility Demo version New command SNN Fixed error - saving options in registry.
1.0.0	Initial release