3dS_WeldAlt

Welded elements become a different color and are shown accordingly in the workshop-assembly drawings. If a plate is green, it holds data of the connection at hand.

3dS_info

Enter project-specific data. This information will be used in your output including schedule, overview and detailed drawings and workshop drawings. It can also show beam specific information.

3dS_ClashCheck, 3dS_WeldCheck

Checking if sections and/or plates are not clashing. The welding check verifies if the elements concerned are close enough to make welding possible.

3dS_UcsChange

For easy showing different views of your project and for installing the right UCS

3dS_ConnMake/ConnDel/Conncopy

Depending on how two sections meet each other, 3dS proposes a type of connection that will be installed automatically with adapted plate dimensions, bolts and reinforcements.

3dS_I/B/U/L/DProf

All sections available on the market can be drawn with these commands

3dS_Cut

Cut or lengthen sections, cope cuts, special cuts.

3dS_Portals/Cube/Pyramid/Ladder

Setup a structure with the optional mounting of sections.

3dS_2Ddwgs, 3ds_Detail

To organize your plotting output like 2D overview and detail-drawings, 3D views.

3dS_Raster

Fast setup of an axis raster in 3D with axis numbering and dimensions.

3dS_trac

To generate all workshop drawings with numerous options.

3dS_bom

A complete schedule of your beams, plates, and bolts; formats: .txt and .csv.

3dS_Stair, 3dS_Handrail

Stairs and handrails fully automated with automated step sizes.

3dS_Bolt/HoleCheck/SlotHole

Position bolts, make holes where bolts meet sections, change holes to slotted holes. It also checks if holes are not too close to an edge and if there is enough space around the bolt to put a wrench.

3dS_Haunch, 3dS_Rib

Customizable Haunches, Gussets, and stiffeners can be inserted anywhere.