Fusion / Podrobnosti o položce
Fill Gaps in Sketch

Fill Gaps in Sketch

Maciej Rogowski
8 hodnocení
Zkušební
Operační systém:
Jazyk:

Popis

Fill Gaps in Sketch add-in scans a sketch and attempts to detect and fill gaps between endpoints of lines and curves in the sketch. It is particularly useful in an imported woodworking sketch geometry.

Popis zkušební verze

Fill Gaps trial is limited to preview. You can buy a license at maciejrogowski.com.

Přečíst si dokument nápovědy

Informace o této verzi

Verze 1.1.2, 20.07.2023
Added support for the new API.

Snímky obrazovky a videa


Hodnocení zákazníků

8 hodnocení
Získat technickou pomoc
  • Livesaver
    bora schninsky | února 17, 2024 Ověřené stažení (Co je to?)

    Is a livesaver!

    Essential addin!

     

    Quick and Good

  • Saved me!
    Dwredbeard776 Dwredbeard776 | prosince 13, 2023 Ověřené stažení (Co je to?)

    One click fixed the most broken DXF I have encountered in a decade. This is what you are looking for. Stop scrolling. Worth every penny.

  • Easy fix
    Sam Gardiner | listopadu 26, 2023 Ověřené stažení (Co je to?)

    Spent over an hour trying to find and fix gaps in an imported .dxf, this fixed it in one click!

  • Fixed my DXF
    Andrew Wright | listopadu 02, 2023 Ověřené stažení (Co je to?)

    Had a DXF exported with some text in it and this resolved it almost instantly.  Great product!

  • Massive Time Saver
    Jason Shrieves | října 16, 2022 Ověřené stažení (Co je to?)

    When importing DXF files from clients, often there are open profiles that need tedious time to manually fix. This did the whole file in seconds. Worth every penny. I must admit that it seems this functionality would have been built into Fusion, but this software sure fills that gap... :-)

  • Perfect Tool
    Hannes Stockinger | května 16, 2021 Ověřené stažení (Co je to?)

    That's really great help in the daily work! 

  • Great!!!!
    Roger o swift | prosince 22, 2019 Ověřené stažení (Co je to?)

    Used for 3D printing. I was asked to make an ornament based on clip art. Used Inkscape to convert to DXF and imported to F360. STL was pretty much unworkable due to gaps. Bought this add in and it automatically fixed everthing.

    Would reccomend highly if you do logo work.

  • Great
    Michał Piwowarczyk | července 11, 2019 Ověřené stažení (Co je to?)

    Very helpful add-on for everyone using project and intersect on intricate objects or imported sketches on regular basis. This can save alot of time when working on large-scale sketches that are not linked and happen to have alot of gaps that are hard to pinpoin

Přejít nahoru