Intersect Mesh Body

Digitally signed app

Gratis
SO:
Idioma:

Descripción

This app allows you to more effectively and precisely use geometry imported from a mesh. Using this app you can cut sections through a mesh to create standard sketch geometry.

 

You can then use the sketch geometry to perform precise measurements and to do additional modeling.

Acerca de esta versión

Versión 1.1, 06/10/2021
Updated

Capturas de pantalla y vídeos


Reseñas de clientes

13 reseñas
Obtener ayuda técnica
  • Problem
    John Blesswin Samuel J | marzo 19, 2024 Descarga verificada (¿Qué es esto?)

    I am not able to select mesh body even in the browser, Please suggest me an workaround and if i select the select option, intersect mesh body option is closing.


  • Just works
    Bernd Held | febrero 03, 2023 Descarga verificada (¿Qué es esto?)

    Works great. But on some stls it creates very much small zigzag lines .
    It would be nice to have an detail level control or to define the level of detail.


  • Nice but redundant?
    Morten H Pedersen | agosto 06, 2020 Descarga verificada (¿Qué es esto?)

    Thanks for the plugin. It works well, but I think it has been to some degree superseeded by the built-in ability to "create mesh section sketch"? This function also creates a sketch with the intersection, that you can then subsequently fit e.g. with a spline. It does, though, take bit more work, but you then also get better / simpler results. To inprove the current it would be smart if you could automatically make planes with well-defined spacing and in one go create sketches and sections.

    BTW, why do you have to select the sketch, when you also have to have the sketch active to create the intersection?

    Adam Nagy (Editor) | agosto 11, 2020

    "why do you have to select the sketch" - it's an artefact from the previous behaviour of the API. When a command was started Fusion exited the Sketch environment and so the sketch needed to be selected, and the add-in did not get updated since.


  • Installation problem on MAC
    Eric HILGER | abril 03, 2020 Descarga verificada (¿Qué es esto?)

    On MacOS, after lauching the .pkg, accepted the licence and to install for myself... installation failed ... and I don't know why

    Adam Nagy (Editor) | abril 06, 2020

    I'm sorry you ran into that. Worst case you could move the content of the package to the correct place by hand: https://modthemachine.typepad.com/my_weblog/2018/04/the-installation-failed-for-app-store-plug-ins.html

    Pino Silvestri | abril 10, 2020

    Hi, I also had the same problem, if you have not yet solved, answer me and I will show you how.


  • Works well
    Ethan Wood | enero 30, 2020 Descarga verificada (¿Qué es esto?)

    I used it to modify STL's from thingiverse

    Aw Smith | febrero 07, 2020

    Could you share your workflow. I keep getting a error "No sketch selected" please select a sketch before running this command"

    Adam Nagy (Editor) | febrero 14, 2020

    Aw Smith, You have to select the sketch in the BROWSER palette before running the command. This is a redundant step (since you're already in the sketch) now since the command's button has been moved to the Sketch environment as a result of the new UI


  • Awesome works great.
    Russell Russ | septiembre 14, 2019 Descarga verificada (¿Qué es esto?)

    Awesome works great.


  • soucis de démarrage
    Pierre Andre | noviembre 15, 2018 Descarga verificada (¿Qué es esto?)

    j'ai bien teléchargé le interset mesh body mais il n'apperait pas dans le déroulant ?

    Une manip pour finaliser installation?

    Merci à vous

     


  • Installation Error
    Reg Vardy | abril 27, 2018 Descarga verificada (¿Qué es esto?)

    I'm getting an installation error when running the .pkg

    10.11.6 2011 MacbookPro

    Eric HILGER | abril 03, 2020

    Did you find the solution ?


  • Excellent
    Pete Jones | enero 21, 2018 Descarga verificada (¿Qué es esto?)

    This is really neat and works well. The only improvement I can think of would be multi-select a bunch of skectches or planes.

    Isaac Lloyd | febrero 19, 2018

    Couldn't you just hold down Ctrl/command?


  • Best fusion app ever!
    Tom Pauw | mayo 14, 2017 Descarga verificada (¿Qué es esto?)

    Such a simple and great idea. All the time ive wasted trying to reverse engineer STLs by manually sketching them. Highly recommend!!!


  • Very useful
    William James Pegram | febrero 03, 2017 Descarga verificada (¿Qué es esto?)

    Exactly what I needed to get planar sections from mesh geometry, for use to create a model of the mesh. Thanks!

    Pavel Pavelka | noviembre 02, 2017

    Dear William, maybe you could help.... I have mesh geometry (decorative ornament) and need to give to it (looks like surface - but it is STL format ).... need change it to solid.... step/iges... is there any way how to do it in fusion 360 ? Many thanks for your time


  • Grab 2d geometry from STL
    Tom Easterday | junio 07, 2016 Descarga verificada (¿Qué es esto?)

    I needed to get 2D geometry from an STL. This plug-in worked great. Thanks!


  • Good Idea
    Christoph Unbescheidt | diciembre 02, 2015 Descarga verificada (¿Qué es esto?)

    Perfect for my workflow with prosthetics

Ir arriba