ModelingPlus V1.1E
已付款, 30 天免費試用版
作業系統:
語言:

說明

1. Occurrence (component) creation command

    Creates an occurrence (component) specifying the origin position and X and Z directions.

2. Construction point creation command

    Creates a construction point (construction point) that specifies the coordinate position.

3. Construction surface creation command

    Creates a construction plane that specifies the coordinate position and direction.

4. Sketch point creation command

    Creates sketch points that specified a 3D coordinate point group (Excel linked).

5. Horizontal sketch lines creation command

    Creates horizontal sketch lines that parallel to the X-axis of the sketch plane (Excel linked).

6. Vertical sketch lines creation command

    Creates vertical sketch lines that parallel to the Y-axis of the sketch plane (Excel linked).

7. Specified long straight sketch line creation command

    Creates a straight sketch line that passes through two points of the specified length.

8. Polyline creation command

    Creates a polyline that is consisting of several continuous straight sketch line segments (Excel linked).

 9. Arc creation command by specifying two points and a radius

    Creates an arc that passes through the start point → end point (swells to the right of the start point → end point).

10. Fit points spline curve creation command

     Creates a fit-point spline curve that passes through a set of specified passing points (Excel linked).

 

For more information is here.

關於此版本

版本 V1.1E, 2023/10/2
Occurrences (components) can be created at specified positions. This allows you to create a sketch plane at a specified position and in a specified direction. You can create construction points and construction planes at specified positions. In sketch mode You can create a straight line that passes through two points in addition to the horizontal and vertical that specify the length. You can create an arc that passes through two points and specifies the radius. You can create a 3D polyline given a set of vertices. You can create a 3D fit spline given a set of vertices.


螢幕快照和視訊


客戶評論

1 評論
取得技術說明
  • Very useful set of tools
    Nicolas Beaudoin | 三月 24, 2023 驗證下載 (這是什麼?)

    I use it weekly and well worth the price

移至頂端