Ecodial plugin

Ecodial plugin

Schneider Electric

Digitally signed app

무료

OS:
언어:

설명

Ecodial Plugin performs the following calculations for multi level networks. 

  • Electrical installation (cable) sizing in accordance with IEC 60364 standard.
  • Short circuit calculation according to CENELEC TR50480.
  • Automatic sizing and selection of circuit breakers with discrimination.
  • Ready to use outputs: Single Line Diagram, Calculation Results, Schneider Electric offers.

 

Note: This app uses custom installer and not the Autodesk App Store standard installer.

도움말 문서 읽기

이 버전 정보

버전 1.7, 2018-08-07
1) Busbar trunking systems (BTS) : Distribution User can now represent Distribution busbar trunking system. 2) Busbar trunking systems (BTS) : Riser User can now represent Riser busbar trunking system. 3) Minor Bug fixes and enhancements Minor bug fixes and enhancements

스크린샷 및 비디오


고객 리뷰

(15 리뷰)

|

기술 도움말 보기
  • Ecodial Ribbon is not showing after installation
    Bandith Sath | 6월 17, 2018 다운로드 확인 (이것은 무엇입니까?)

    Dear Admin,

    I already installed the Ecodial and ID Spec many times, but it is not showing inside the Autocad 2019.

    Plug Ins are installed properly. I'm not sure what the problem is.

    Can you help me ? I need to use them urgently.


    Nagendra Rao (게시자) | 6월 30, 2018

    Dear Bandith sath, With the new update of the Ecodial and ID spec Plugin, you can now work with AutoCAD 2019 Version.


  • Ecodial Advance
    Georges Cordahi | 7월 23, 2017 다운로드 확인 (이것은 무엇입니까?)

    When I am running calculate project, a message tells me access to the path C:\users|Hp\appdata\Temp.....is denied any solution


    Nagendra Rao (게시자) | 7월 26, 2017

    Dear Georges Cordahi, This looks like a specific case, I would request you to connect with the Customer care center http://www.schneider-electric.com/b2b/en/support/ to seek for the solution.


  • Issue when loading AutoCAD
    Dapo Azeez | 7월 06, 2017 다운로드 확인 (이것은 무엇입니까?)

    Plugin is really nice and easy to use for me but some of the issue I encountered was that 1. When I close autocad and open it again, I will have to load the "SchneiderElectric.EAP.Plugin.dll" all over again. 2. Is there any way one can configure a Synchronization Panel with an AMF using the plugin


    Nagendra Rao (게시자) | 7월 19, 2017

    Dear Dapo Azeez, Thank you for your feedback on the Ecodial Plugin. On your questions, here are our comments. 1) "Eap.Plugin.dll" needs to be loaded again : We currently are looking into this to resolve this issue. 2) "Sync / AMF Panel" : This is currently not available in this version. We hope to cover this in the future versions to come.


  • Script error
    Yusuf Butanda | 3월 28, 2017 다운로드 확인 (이것은 무엇입니까?)

    Halo Admin I have installed ecodial plugins on my machine and its working pretty well. However, when I try to tap on the calculate command and sign in online. It brings a script error. and later displays that my browser is not supported(outdated.) I have three browsers in their latest versions. i.e. chrome, Firefox, and explorer. Please I need your advise on this, what could be the problem and how can I solve it?


    Nagendra Rao (게시자) | 3월 30, 2017

    Dear Yusuf , Its required to have Iinternet explore 9 and above to register for the Application. I would request you to download the latest version of the internet explorer and try to register for the application.This should resolve the issue you are facing. Thank you.


    Yusuf Butanda | 5월 29, 2017

    Thank you Rao, it worked well


  • it doesn't work
    Ahmed Elmahdy | 3월 25, 2017 다운로드 확인 (이것은 무엇입니까?)

    it is installed successfully and the Schneider ribbon exists in AutoCAD but when I click new to create a new project nothing happens. any advice ?


    Nagendra Rao (게시자) | 3월 28, 2017

    Dear Ahmed, Looks like the program did not load. Please restart AutoCAD and see if you get a message to load the Plugin. if not, you can manually load the Plugin by typing command "netload" . The program will be located in the following directory (Replace user name by your log-in name) "C:\Users\UserName\AppData\Roaming\Autodesk\ApplicationPlugins\SchneiderElectric.bundle\Contents\Ecodial Plugin\2016\SchneiderElectric.EAP.Plugin.dll " if you are using AutoCAD 2016, otherwise, you have to select the folder appropriately and load the same program. Hope this helps.


    Ahmed Elmahdy | 4월 05, 2017

    problem solved when I restarted AutoCAD, thank you


  • Prithvi Guddy
    prithvi balaji | 2월 10, 2017 다운로드 확인 (이것은 무엇입니까?)

    Its a great app for electrical calculations, preparing SLD, calculating results and also exporting report. Its so user friendly and Smart draw is one awesome it makes drawing SLD just in no time.:)


  • Thanks so much!
    Andy Caddic | 1월 03, 2017

    This was exactly the tool I was looking for. An addon that will help me perform sizing and let me save the results. Design and sizing in one place.


  • It´s not installed on my PC
    Gustavo Piña | 12월 19, 2016 다운로드 확인 (이것은 무엇입니까?)

    Hi, I am from venezuelan, I´d like to help me about iinstaled this software because, when instaled tell me error code 1920, and tell me that I don´t have sufficent privileges .... But I am Admon on my PC I only use my PC, I have Win 7 Ultimate and win 32 bits. thanks you


  • Great calculation tool
    Arko Seal | 12월 15, 2016 다운로드 확인 (이것은 무엇입니까?)

    its a very good tool with some great features like Easy draw which is really helpful to draw SLD network in no time. Also its provides some good reporting features and flexibility to take the calculation to more detail level in other tools like Ecodial offline


  • Excellent Tool
    Arunkumar Thangavel | 12월 12, 2016 다운로드 확인 (이것은 무엇입니까?)

    Smart draw utility is awesome. It took less than a minute to generate the Single Line Diagram as well as report.


  • Nice Tool
    Chinnaayyadurai subramanian | 12월 12, 2016 다운로드 확인 (이것은 무엇입니까?)

    Good tool for electrical calculation and sizing the components. draw single line diagram user friendly.


  • Free and usless
    Shay Friedman | 2월 24, 2016 다운로드 확인 (이것은 무엇입니까?)

    Nothing if compared to stand alone application.Doesn't support North American standards.Doesn't work with autocad directly, have to use prefilled excel files...


    Nagendra Rao (게시자) | 2월 26, 2016

    Dear Shay Friedman Thank you for the response. As mentioned in the description of the plugin, the calculations are in compliance with IEC / CENELEC Standards and starts with capturing / importing the load list which is the first step in creating a single line diagram. We are evolving the plugins and you will see more and more features added.


  • It doesn't work
    Ashraf Ibrahim | 12월 17, 2015

    It doesn't work and I get the below message: Command: ECODIAL Open new drawing.


    Nagendra Rao (게시자) | 12월 20, 2015

    Dear Ashraf Ibrahim, We have seen this behavior while using different templates in AutoCAD rather than using AutoCAD standard templates. Could you please check if the same behavior exists with standard AutoCAD template ?. The Plugin is dedicated to AutoCAD basic users and AutoCAD Electrical only.


  • Great tool from Schneider Electric
    Chandra Shekar G | 12월 15, 2015 다운로드 확인 (이것은 무엇입니까?)

    Quick design and sizing circuit breaker with minimal effort.


  • Nice tool
    Gangadhar Talawar | 12월 15, 2015 다운로드 확인 (이것은 무엇입니까?)

    Easy to use interface and good one, it took no time to generate the load list and get the design report in DWG format.

맨 위로 이동