3DHRDWR-I – 3D Hardware Imperial SizeWin32 and 64, English
General Usage Instructions
Select a Threading type as either ‘Threaded’ or ‘Simplified’ and if Threaded, select the Type as either of ‘Course’ or 'Fine’.
Select a Head Type (Flat, Hex, Pan Head, etc.) and then the Size list will populate with the available sizes to select. Select the desired Size and appropriate Length for the selected Head and Size (a warning box will appear if out of standard range).
You may add additional hardware to the fastener like a single Nut, and Washer. When extra hardware is added, additional dialog boxes will appear to assist with setting up the options or types. Set the desired Metal Thickness to set the offset distance from the Head to the first washer.
Pick OK and a prompt appears.
PROMPT: Center point: Pick a point on the drawing to place the 3D Bolt.
PROMPT: Move/Rotate/<Second Point of Displacement>: Pick another point to place another / duplicate. Other options in the prompt; Type "M" and ENTER to move the part, "R" and ENTER to rotate it, pick another point to copy it to or just ENTER to exit the command.
See Settings and Options in Help (F1) for details of each function.
|Ribbon/Toolbar Icon||Command||Command Description|
3DHRDWR-I – 3D Hardware Imperial
Creates multiple-types of 3D screw and/or fastener hardware with a variety of head types in Imperial units.
The installer that ran when you downloaded this plug-in from Autodesk App Store has already installed the plug-in. To uninstall this plug-in, click Control Panel > Programs > Programs and Features, and uninstall as you would any other application from your system. For Installation help and Requirements, visit our Apps Support page
|Version Number||Version Description|
|Minor fix, no interface or functional changes to the app itself.|