ACCORDION – Adds accordion tuning to polylinesWin32 and 64, English
General Usage Instructions
In the Height edit box, type a value for the distance that the tune will extend from the picked polyline.
In the Length edit box, type a value for the lengthwise size of the tuned portion.
In the Corners Treatment area:
Pick either the Chamfer, Fillet or None radio button to select the desired type of corner in the polyline.
If either the Chamfer or Fillet radio buttons are chosen, type the radius or chamfer distance in the Size edit box or accept the default.
Pick Cancel to exit and not store changes.
Pick Exit to store changes and exit dialog.
Pick Create and the following prompts appear:
PROMPT: Pick polyline segment: Pick a straight polyline segment that is at any angle.
PROMPT: Center point: Pick a point on the selected polyline where the tuning section will be placed.
PROMPT: Direction: Pick any point on the either side of the polyline. The tuning section will be placed in that direction.
Prompts will repeat until user presses <Enter>
|Ribbon/Toolbar Icon||Command||Command Description|
Adds an accordion tuning section of specified height and width to any straight polyline segment.
The installer that ran when you downloaded this plug-in from Autodesk App Store has already installed the plug-in. To uninstall this plug-in, click Control Panel > Programs > Programs and Features, and uninstall as you would any other application from your system. For Installation help and Requirements, visit our Apps Support page
|Version Number||Version Description|
|Minor fix, no interface or functional changes to the app itself|