SpiralCone Unfolding

SpiralCone Unfolding

Digitally signed app

Zdarma
Operační systém:
Jazyk:

Popis

Cone is defined by 2 open curves (Arcs, Polylines and Splines). Curves can be on different UCS or even 3D curve (3Dpoly, 3Dspline). Each curve is divided into "Number of Segments" lines that are connected by 3D faces.

 

Elbow is curved pipe. Centre of pipe cross-sections (= arcs) lay on circle. It is represented by a number of cones connected at cross sections. Elbow is defined by Spiral radius, Inlet radius, Final radius, Spiral Gap (for welding), Angle and Number of cones. 

 

Spiral is curved pipe. End points of cross-sections (= arcs) lay on circle. Defined is with the same parameters as Elbow, just Gap is usually bigger. This geometry is for turbine inlet spirals or radial fan housings.

 

Note: This app uses a custom installer (and not the standard App Store installer).

Informace o této verzi

Verze 2.5.0, 02.04.2024
Compatibility with Autodesk® AutoCAD® 2020 to 2025 AutoCAD LT 2024, 2025

Snímky obrazovky a videa


Hodnocení zákazníků

2 hodnocení
Získat technickou pomoc
  • g
    Amro Baker | června 16, 2019

    good


  • Great Tools
    Cretu Alifantis | října 22, 2014 Ověřené stažení (Co je to?)

    This is great, great tools. I connected three adduction pipes water (method trousers), one pipe OL 1000 and 2 pipe OL 500. All work in to Acad 2008. Unfolding "trousers" I did it by hand. I used yesterday this apps with Autodesk Mechanical software (trial) and with three click I solved the problem. All the best. Respectfully, Alifantis C.

Přejít nahoru