Flatten

Flatten

Win32 and 64, English

LexmanCAD
Convert one or more 3D polylines into 2D polylines and vice versa.

General Usage Instructions

- Use the ribbon buttons or the commands "LCAD_FLATTEN" and "LCAD_RAISE" to convert 3D Polylines into 2D Polylines and vice versa.

- Select one or several 3D polylines to flatten, or one or several 2D Polylines to raise.

- In the case of "Flatten," specify an elevation to place the flattened 2D Polyline. In the case of "Raise," the each point of the resulting 3D Polyline will be placed at the elevation of the 2D Polyline which is being converted.

-"Flatten" will replace 3D Polylines with 2D Polylines while "RAISE" will replace 2D Polylines with 3D Polylines.

Screenshots

Commands

Ribbon/Toolbar Icon Command Command Description

LCAD_FLATTEN

Launching LCAD_FLATTEN will prompt the user to select 1 or multiple 3D polylines. After selection, hit enter to continue (or hit escape to exit the command). User is then prompted to specify a "target elevation". Target elevation is the elevation at which the 2D polyline will be placed. A numeric entry is required and the default entry is zero elevation. Hit enter to continue. The 3D polyline is then replaced with a 2D polyline at the specified elevation.

LCAD_RAISE

Launching LCAD_RAISE will prompt the user to select 1 or multiple 2D polylines. After selection, hit enter to continue (or hit escape to exit the command). The 2D polyline is then replaced with a 3D polyline.

Installation/Uninstallation

The installer that ran when you downloaded this plug-in from Autodesk App Store has already installed the plug-in. You may need to restart the Autodesk product to activate the plug-in. To uninstall this plug-in, click Control Panel > Programs > Programs and Features (Windows 7/8/8.1/10) or Control Panel > Add or Remove Programs (Windows XP), and uninstall as you would any other application from your system.

Additional Information

"Flattening" a 3D poly to a specific elevation and then "raising" it again is a quick way to get a 3D poly with all points at the same, user-specified, elevation and is much quicker than moving the points manually.

Known Issues

No Known Issues

Contact

Company Name: LexmanCAD
Support Contact: devnull240@gmail.com

Author/Company Information

LexmanCAD

Support Information

Support Contact: devnull240@gmail.com

Version History

Version Number Version Description

2.1

added 2018 support.

2.0

Flatten 2.0

- Changed the ribbon icons (they are prettier).

- Added new function to convert a 2D poly into a 3D poly.

- Renamed the functions to use the "LCAD_" predicate.

- Added support for "light" and "heavy" polyline types.

1.0.1

Flatten 1.1

- Runs on AutoCAD® 2013, 2014 and 2015.

1.0.0

Flatten 1.0

- Runs on AutoCAD® 2015.

Go top