7cad Dynamic Block

7cad Dynamic Block

Digitally signed app

30일 무료 평가판, 지불됨
OS:
언어:

설명

This app enables STRETCH command to stretch dynamic blocks when the crossing windows catch the dynamic parameter grips.

Supported parameters are: Point parameters, Polar parameters and Linear parameters.

For linear parameter, it is assumed horizontal. The app can't automatically detect its angle. Therefore, if the linear parameter is not horizontal, some manual setup should be taken in the BlockEditor (BEDIT command) as following:

 

+ If the linear parameter is rotated 60 degrees counterclockwise, its description should be "60".

+ If it is rotated 60 degrees clockwise, its description should be "-60".

 

Notes:

It is not supported if the linear parameter is rotated dynamically via another parameter's action.

The app does not work as expected if you have many chained action parameters.

In both above cases, a custom programming solution is required

이 버전 정보

버전 1.0.0, 2021-09-21
Initial release.


스크린샷 및 비디오


고객 리뷰

0 리뷰
기술 도움말 보기
맨 위로 이동