Executive schemes.

Executive schemes.

Win32 and 64, English

BearDyugin
The application helps to display the deviation of the actual position of the structures from the project.

General Usage Instructions

A detailed description of the application is here: https://beardyugin.com/program/11

Commands

Ribbon/Toolbar Icon Command Command Description

Geo_dev_point_from_point

The application creates arrows with signatures of deviations from the project in the plan, as well as the callouts with the value of the deviation from the altitude.

Geo_dev_vertical_move_block

The block is reversed relative to the insertion points at short distances by the application. The block is moved and the callout from the starting point of the insert is built at long distances by the application.

Geo_dev_point_from_line

The application is similar to Geo_dev_point_from_point, with only one difference being that the project position acts as linear objects instead of point ones:

Geo_dev_point_from_point_move_bl

The block is reversed relative to the insertion points at short distances by the application. The block is moved and the callout from the starting point of the insert is built at long distances by the application.

Geo_dev_vertical_sel_bad

The application is similar to the [Geo_dev_vertical_sel]. There is only one difference that in this case only blocks, that contain deviation values large, then the allowed values, will be selected.

Geo_dev_dist_kons_to_point

The application creates a dimension from the point along the perpendicular to the design. All objects are created in accordance with the current settings layer/color/style/...

Geo_dev_dist_ax-co-pt

The application creates dimensions that contain 2 values: the first one is project value (from axis to construction) and the second one is actual value (from axis to point).

Geo_dev_vertical_sel

Since the application creates large number of different blocks, it is convenient to use this command for their mass selection.

Geo_dev_dist_+_fact

The application adds to the already existing dimensions the actual distance calculated by the points found near the base points of the dimension. In this case, at least one point of the actual point is sufficient.

Geo_dev_2dist_ax-co-pt

The application is similar to Geo_dev_dist_ax-co-pt, with only one difference being that 2 dimensions are supplied from one corner of the structure to 2 perpendicular axes, containing the project and actual values.

Geo_dev_point_from_point_sel_bad

The application is similar to the [Geo_dev_vertical_sel]. There is only one difference that in this case only blocks, that contain deviation values large, then the allowed values, will be selected.

Geo_dev_point_from_point_sel

Since the application creates a large number of different blocks, it is convenient to use this command for their mass selection.

Geo_dev_level

The application makes the high-altitude deviations on the plan.

Geo_dev_vertical

The application creates arrows in the drawing with signatures of deviations from the project.

Geo_dev_dist_sel_bad

The application allows you to select dimensions that contain values that are large, then the allowed values.

Geo_dev_dist_ax-co-pt_curv

The application is similar to Geo_dev_dist_ax-co-pt, with only one difference being that the axis and project can be curved lines, such as Spline or Civil traces

Geo_bad_vert_to_good

Corrects values that exceed permissible limits

Geo_bad_arr_to_good

The command replaces values that exceed permissible values by values equal to the tolerance, while changing the color as for normal values.

Geo_bad_dist_to_good

Replaces all values that exceed tolerance, by good values.

Geo_bad_arr_to_good

The command replaces values that exceed permissible values by values equal to the tolerance, while changing the color as for normal values.

Installation/Uninstallation

The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart the Autodesk product to activate the app/plug-in. To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8/8.1/10) and uninstall as you would any other application from your system.

Known Issues

Contact

Company Name: BearDyugin
Support Contact: beardyugin@gmail.com

Author/Company Information

BearDyugin

Support Information

Version History

Version Number Version Description

2.1.2

Added current version support.

2.1.1

Initial release
Go top