Change Block Base Point

Change Block Base Point

Win32 and 64, English

Lee Mac Programming
Change the base point position for a selected block.

General Usage Instructions

Upon issuing one of the above commands at the Autodesk® AutoCAD® command-line, the program will prompt the user to select a block for which to change the base point position. Following a valid selection, the user is then prompted to specify a new position for the base point, relative to the selected block reference. The block definition (and block reference, depending on the command used) will then be modified to reflect the new position of the block base point. If the selected block is attributed, an ATTSYNC operation will also be performed to ensure all attributes are in the correct positions relative to the new base point. Finally, the active viewport is regenerated to reflect the changes throughout all references of the block. Please note: The drawing will need to be regenerated if the UNDO command is used to revert the operations performed by this program.

Screenshots

Commands

Ribbon/Toolbar Icon Command Command Description

CBPR

Change the position of a block base point whilst retaining the visual position of all block reference geometry.

CBP

Change the position of a block base point whilst retaining the coordinates of each block insertion point.

Installation/Uninstallation

The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin.

You may need to restart the Autodesk product to activate the app/plug-in.

To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8/8.1/10) and uninstall as you would any other application from your system.

Additional Information

Known Issues

The drawing must be regenerated if the UNDO command is issued to undo the operations performed by the program.

Contact

Company Name: Lee Mac Programming
Company URL:
Support Contact:

Author/Company Information

Lee Mac Programming

Support Information

For support, contact: lee@lee-mac.com

Version History

Version Number Version Description

1.5.0

Added latest support

1.5

Added 2016 support

Go top