EN Plastic Pipes catalog (Pipe Network)

EN Plastic Pipes catalog (Pipe Network)

Ingyenes
OPERÁCIÓS RENDSZER:
Nyelv:

Leírás

Autodesk® Civil 3D® Pipe Network, plastic pipes, catalog to be used according to EN standards. Content has been realigned from the version 2022.0. Pipes are divided into 2 main groups (Generic and Manufacturer). All pipes are now fully based on EN/ISO standards. Additional information has been attached into pipe properties if applicable according to the standard (PN, SDR, SN, Design Coefficient C, Minimum Required Strength, Material Class etc.). In addition, classification property has been included with a default value to CCI (Construction Classification International) but it can be changed to any other if needed (through editing). Manufacturer specific content is now divided into its own catalog. Manufacturer specific pipes are also divided according to EN/ISO standard, but product names are used according to Manufacturer data sheets. Additional parameters (if available) are included like Manufacturer, Manufacturer Source, Field of Application, Connection Type, Transport Type, Form Type, Color, Weight (kg/m) etc. More information about Manufacturer specific content can be found from the publisher webpage.  

 

Catalog includes:

  • EN Plastic Pipes (Generic)
  • EN Plastic Pipes (Pipelife)

EN Plastic Pipes (Generic) components based on the following standards:

  • Conduit systems (for cable management) (EN 61386-24) – HDPE pipes (DN 25 – DN 250)
  • Fibre organisers (optical fibre systems) (EN 50411-6-1) – LDPE / LLDPE / MDPE / HDPE / PP (DN 3 – DN 16)
  • Non-pressure (drainage, sewerage) (EN 1401-1) – PVC-U (SDR 27.6 – SDR 51; DN 110 – DN 1000)
  • Non-pressure (drainage, sewerage) (EN 1852-1) – PP (SDR 22 – SDR 41; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 12666-1) – PE (SDR 17 – SDR 33; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 13476-2) – PVC-U / PP / PE (Type A; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 13476-3) – PVC-U / PP / PE (Type B; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 14758-1) – PP-MD (SDR 33; DN 110 – DN 1000)
  • Non-pressure (soil, waste – discharge) (EN 1451-1) – PP (SN 2 – SN 6.3; DN 32 – DN 315)
  • Pressure (gas) (EN 1552-2) – PE (SDR 11 – SDR 17.6; DN 16 – DN 630)
  • Pressure (water, drainage, sewerage) (EN 12201-2) – PE 40 / PE 80 / PE 100 (SDR 6 – SDR 41; DN 16 – DN 2500)
  • Pressure (water, drainage, sewerage) (EN ISO 1452-2) – PVC-U (SDR 11 – SDR 41; DN 12 – DN 1000)
  • Pressure (water, drainage, sewerage, irrigation) (EN 17176-2) – PVC-O (SDR 17 – SDR 65; DN 63 – DN 1200)


EN Plastic Pipes (Generic) components based on the following standards:

  • Additional info available at publisher website


Note: This catalogue can be successfully used with Autodesk® Storm and Sanitary Analysis package, because pipes will be always carried over with its real pipe inner diameter value. Pipe general diameter or any other property can be used in labels or taken over into Property Set Definitions.

Important: Content pack has been tested with Civil 3D 2024 only. Although the content pack is not fully tested with previous Civil 3D versions, it should work with some versions back without any major issues.

 

Note: This app uses a custom installer (and not the standard App Store installer).

Verzióinformáció

Verzió 2024.0.0, 2023. 11. 03.
2024.0.0 - edited release


Képernyőfelvételek és videók


Ügyfélértékelések

5 értékelés
Műszaki segítségnyújtás
  • 2024 Version
    Roberts Zvejnieks | október 09, 2023 Ellenőrzött letöltés (Mit jelent ez?)

    Looks very good but when will it be available for the 2024 version?

    Raido Puust (Közzétevő) | november 03, 2023

    Thanks for your interest! It is now published and tested with the C3D 2024.


  • Uponor
    Shafiq Mohammad | szeptember 08, 2022 Ellenőrzött letöltés (Mit jelent ez?)

    Uponor pipe is not inluded in this catalog the previous verstion 2020 had it. 

    Raido Puust (Közzétevő) | szeptember 08, 2022

    That is quite right, because the current version had major upgrade and focused around EN/ISO standards. Manufacturer specific content is based on those standards and anyone is free to add that information during the design (name, type etc.). For example as a separate property in their property set. This can be easily done and there is no point to keep the data (pipes as content) for various manufacturers because the content pack starts to repeat itself.


  • awesome catalog
    Yemen Yazici | március 29, 2022 Ellenőrzött letöltés (Mit jelent ez?)

    thank you fro all works; awesome catalog

    Raido Puust (Közzétevő) | március 31, 2022

    Good to know, thanks!


  • Excelent
    Rosário Dilo | szeptember 02, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    A catalog that was needed in Pressupe pipe and pipes network


  • perfect!
    Ingmar Aija | március 17, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    excellent catalog

    Clint Davis | december 12, 2023

    What's the chance of getting an imperial version?

Ugrás a tetejére