OPERÁCIÓS RENDSZER:
Nyelv:
Leírás
Autodesk® Civil 3D® Pressure Network PE catalog to be used in EU countries (most applicable). Components include additional information about its manufacturer but this is not included into the component name (for example, DN200 pipe is used as a pipe name, instead of Pipelife DN200 or Uponor Infra DN200 pipe).
Catalog includes:
- Pressure class: SDR33 - SDR7.4
- Pipe diameters: DN16 – DN1600
- Fittings based on its connection type (electrofusion, segmented) that can be combined with each other
- All components include full list of parameters that can be used in labels
- Pressure class dependent wall thickness for all components
- About 200 PE pipes + more than 1700 fittings (when counting pressure class variations)
Important: Content pack has been tested in Autodesk® Civil 3D® 2015 - 2020.
Note: This app uses a custom installer (and not the standard App Store installer).
Verzióinformáció
Verzió 2020.0, 2019.07.05.Added 2020 support.
It is working perfect on 2018, but in 2019 I see unknown material. What's the problem?
There should be no difference in terms of 2018 or 2019. Please check if you are using Country Kits, sometimes those do affect the use of catalogue, because path variables are changed. Also consider following the same procedure as with 2018 - create a parts list, save a drawing, restart Civil 3D. There are couple of comments that this was a needed step. And this is not because of the current catalogue, but a more like a general issue - when catalogue file is switched. Hope it helps. Also check some guidelines from the help page (given below).
I am looking for this Calalouge for Plant 3D. Is it possible to install this for Plant 3D?
Hei Ole-Jørgen, did you receive any help? I am looking for the same: Pipelife catalog for Plant 3D
The plugin works fine, but there is no elbow and tees for DN50, DN 63 and DN75. Why?
Please check the readme: http://flowbim.ee/pressure-network-content-for-autocad-civil-3d/ The most wider selection of diameters is available in PN16/SDR11.
Rodrigo, Did you find elbows and tees? I went to the link that Raido mentioned below and it was a missing link... just curious, because I was hoping to find elbows and tees for Civil3D pipe pressure networks... and the software download seemed it would be the right fix, but if you couldn't find elbows and tees, then I am hesitant...
MV Engineering - Thanks for pointing out. The link is now fixed.
I was about to write something about it not working - but, as the above user stated: restard C3D once after the installation and everything works. Great library of PE pipe sizes!
Good to know that it worked out!
This install appears to install correctly, but obviously, it required a restart.... sorry for the initial poor review, and thank you for the reply.