Pipe Network catalog for EU market

Pipe Network catalog for EU market



Autodesk® Civil 3D® Pipe Network catalog to be used in EU countries (most applicable). Content has been realigned from the version 2022.0. Pipes/structures are now divided into 2 main groups (Generic and Manufacturer). Generic Plastic Pipes are now fully based on EN/ISO standards. Additional information has been attached into pipe properties if applicable according to the standard (PN, SDR, SN, Design Coefficient C, Minimum Required Strength, Material Class etc.). In addition, Classification property has been introduced with a default value to CCI but it can be changed to any other if needed (through editing). Manufacturer specific content is now divided into its own subfolder. Manufacturer specific pipes are also divided according to EN/ISO standard, but product names are used according to Manufacturer data sheets. Additional parameters (if available) are included like Manufacturer, Manufacturer Source, Field of Application, Connection Type, Transport Type, Form Type, Color, Weight (kg/m) etc. More information about Manufacturer specific content can be found from the publisher webpage.  

Catalog includes:

  • EN Plastic Pipes (Generic)
  • EN Plastic Pipes (Pipelife)
  • EN Structures (Generic)


EN Plastic Pipes (Generic) components based on the following standards:

  • Conduit systems (for cable management) (EN 61386-24) – HDPE pipes (DN 25 – DN 250)
  • Fibre organisers (optical fibre systems) (EN 50411-6-1) – LDPE / LLDPE / MDPE / HDPE / PP (DN 3 – DN 16)
  • Non-pressure (drainage, sewerage) (EN 1401-1) – PVC-U (SDR 27.6 – SDR 51; DN 110 – DN 1000)
  • Non-pressure (drainage, sewerage) (EN 1852-1) – PP (SDR 22 – SDR 41; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 12666-1) – PE (SDR 17 – SDR 33; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 13476-2) – PVC-U / PP / PE (Type A; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 13476-3) – PVC-U / PP / PE (Type B; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 14758-1) – PP-MD (SDR 33; DN 110 – DN 1000)
  • Non-pressure (soil, waste – discharge) (EN 1451-1) – PP (SN 2 – SN 6.3; DN 32 – DN 315)
  • Pressure (gas) (EN 1552-2) – PE (SDR 11 – SDR 17.6; DN 16 – DN 630)
  • Pressure (water, drainage, sewerage) (EN 12201-2) – PE 40 / PE 80 / PE 100 (SDR 6 – SDR 41; DN 16 – DN 2500)
  • Pressure (water, drainage, sewerage) (EN ISO 1452-2) – PVC-U (SDR 11 – SDR 41; DN 12 – DN 1000)
  • Pressure (water, drainage, sewerage, irrigation) (EN 17176-2) – PVC-O (SDR 17 – SDR 65; DN 63 – DN 1200)


EN Plastic Pipes (Generic) components based on the following standards:

  • Additional info available at publisher website


EN Structures (Generic)

  • Structures are separated by its type (access, inlet) and diameters.
  • Structures in this catalog are in range 315 – 1600 mm.


Note: This catalogue can be successfully used with Autodesk® Storm and Sanitary Analysis package, because pipes will be always carried over with its real pipe inner diameter value. Pipe general diameter or any other property can be used in labels or taken over into Property Set Definitions.

Important: Content pack has been remodeled with Civil 3D 2022 (updated with Civil 3D 2023). Although the content pack is not fully tested with previous Civil 3D versions, it should work with some versions back without any major issues.


Note: This app uses a custom installer (and not the standard App Store installer).

이 버전 정보

버전 2023.0.0, 2022-07-11
2023.0.0 - initial release

스크린샷 및 비디오

고객 리뷰

4 리뷰
기술 도움말 보기
  • Uponor
    Shafiq Mohammad | 9월 08, 2022 다운로드 확인 (이것은 무엇입니까?)

    Uponor pipe is not inluded in this catalog the previous verstion 2020 had it. 

    Raido Puust (게시자) | 9월 08, 2022

    That is quite right, because the current version had major upgrade and focused around EN/ISO standards. Manufacturer specific content is based on those standards and anyone is free to add that information during the design (name, type etc.). For example as a separate property in their property set. This can be easily done and there is no point to keep the data (pipes as content) for various manufacturers because the content pack starts to repeat itself.

  • awesome catalog
    Yemen Yazici | 3월 29, 2022 다운로드 확인 (이것은 무엇입니까?)

    thank you fro all works; awesome catalog

    Raido Puust (게시자) | 3월 31, 2022

    Good to know, thanks!

  • Excelent
    Rosário Dilo | 9월 02, 2017 다운로드 확인 (이것은 무엇입니까?)

    A catalog that was needed in Pressupe pipe and pipes network

  • perfect!
    Ingmar Aija | 3월 17, 2017 다운로드 확인 (이것은 무엇입니까?)

    excellent catalog

맨 위로 이동