Cogo Stationing

Cogo Stationing

Prairie Robotics Inc



The Cogo Stationing plug-in allows the user to select an alignment and then cogo points. The nearest perpendicular intersect is used from each cogo point and the stationing at that point along the alignment is added to the description field of the cogo point. The offset can also be added to the description field of the cogo point.


If no perpendicular intersect is found along the alignment then no stationing is added to the cogo point description. The added stationing will not replace any text in the description box unless it is an existing stationing with the delimiter '+' (ie. 0+999.99). In this case it will replace the old stationing with the updated station value. Otherwise, the existing text in the description field is placed before the stationing. The formatted stationing string is the same as the user's stationing style attributed to the alignment.


If the user chooses, the offset can also be added to the description field, either alone, or tagged on after the stationing.

도움말 문서 읽기

이 버전 정보

버전 1.1.0, 2018-09-28
Updated to 2019 version.

스크린샷 및 비디오

고객 리뷰

(7 리뷰)


기술 도움말 보기
  • Perfect
    Kasper Rasmussen | 7월 11, 2017 다운로드 확인 (이것은 무엇입니까?)

    Its simple and perfect! I used it a lot on CIVIL 2016. Does it also work for Civil 2018?? :-)

    Prairie Robotics Inc (게시자) | 7월 12, 2017

    Thanks for the great review! I will push the 2018 version and try and let you know when it becomes available. :)

  • Larry D
    Larry Dodge | 5월 20, 2016 다운로드 확인 (이것은 무엇입니까?)

    I can't tell you how much time I have spent surfing the web to find an answer. Big time saver. I used to have a long workaround for the same result. Made my day.

  • just what I was looking for!!
    Roger A. Same | 2월 04, 2016 다운로드 확인 (이것은 무엇입니까?)


  • This app is not ready for production use
    Michael Sjolin | 1월 07, 2016 다운로드 확인 (이것은 무엇입니까?)

    The app functions as advertised, but the results are not as advertised. Here are two problems: 1. There needs to be a precision setting so you can control the number of positions to the right of the decimal 2. I clicked my alignment then clicked the point that was set at STA 19+00. The code on the point was added at STA 1+900.000 This will be an extremely useful app, especially for use in construction layout pre-calcs. For me to find it useful, the two items noted above must be solved. Also, it would be useful to add the offset distance and direction from the alignment. I gave it 3 of 5 stars because I'm sure my complaints can be fixed quite easily.

    Prairie Robotics Inc (게시자) | 1월 07, 2016

    Thanks for this useful feedback Mike! You are right, I have been thinking about making those changes for some time now and just haven't got around to it, but since you mentioned that this functionality would be useful I can easily add it in. I will notify you when I have it fixed.

    Michael Sjolin | 11월 23, 2016

    I have downloaded and installed version 1.1.0 and used it and it works as advertised with 3 different command options: 1. station only 2. offset only 3. station and offset. For construction layout pre-calcs this is a very useful tool.

  • Awesome!!
    Hari Patel | 1월 07, 2016

    Extremely efficient and Simple add-on. It get the job done very quickly.

맨 위로 이동