Operační systém:


ATTENTION MAC USERS: If you experience issues with the installer please see this article first. Then if you still have problems e-mail me (ross.korsky@gmail.com) and I will provide a workaround.


Precisely dimensioned laser cut parts are wonderful to work with. By adjusting your geometry for the width of the laser cut you have full control over how tightly your parts fit together. By using this add-in with a small (or even negative) value for your kerf you can make loose fitting parts for a child's puzzle perhaps. By using an aggressive value (say 0.20 mm - or a value larger than your calculated/measured actual kerf) you can make parts that need to be gently pounded together for no-glue assembly. Then there is the middle ground where parts can be easily dry-fit and disassembled multiple times prior to gluing.


This ADD-IN also supports the creation of multi-layered DXF files, splitting your perimeter and cutouts into their own layers.


Get all of this without modifying your geometry or tediously offsetting and deleting scores of lines and curves - let DXF4Laser do the hard work for you!


This tool is not the best tool for the job, however, it is often the easiest. For those cases where you are dealing with a non-manifold shape or simply require more control over the path generation the manufacturing workspace can be used to generate either a multilayer DXF or gcode toolpaths directly. See Lars' video to learn how https://www.youtube.com/watch?v=2M0pwqe-r1M.

Přečíst si dokument nápovědy

Informace o této verzi

Verze 1.1.3, 14.05.2020
Update for new Fusion UI - DXF for Laser is now found under the create menu (and tools > add-ins menu) instead of the sketch menu.

Snímky obrazovky a videa

Hodnocení zákazníků

(17 hodnocení)


Získat technickou pomoc
  • KERF setting
    Clive Galway | června 25, 2020 Ověřené stažení (Co je to?)

    Hi, I need to export DXF to be sent to a carbon fibre cutter, but he doesn't use laser. Can you confirm that setting KERF to 0 does not alter the output at all?

    Right clicking the sketch and exporting to DXF includes contruction lines, which is a pain for him and could lead to ambiguity, exporting the whole model results in multiple items in the DXF, which again is a pain, so it seems like this tool is the simplest solution

    Ross Korsky (Vydavatel) | června 26, 2020

    Correct, a kerf of 0 will simply generate a clean DXF file without any offsetting of lines. You can also enter negative kerf values if the desire is to have loser fitting parts.

  • Kerf messing up, everything else is amazing
    Madnessandtea Madnessandtea | února 12, 2020 Ověřené stažení (Co je to?)

    Really easy to use and Mega helpful, Ive just come across a problem though where the kerf doesnt seem to be doing anything - Mind you, it could be due to my chinese laser program.

  • Nice for single faces.
    Mattias Hedberg | října 26, 2019 Ověřené stažení (Co je to?)

    Nice for a "one of surface". But without the support for exporting multiple faces at the same time it is faster to export them the normal way and scale them in illustrator.

  • Needs an update for the new toolbar setup
    Tony Donno | července 03, 2019 Ověřené stažení (Co je to?)

    Had to change SketchPanel to SolidModifyPanel in add_button and remove_button to get this tool to load correctly in the new UI.

    Matt Van Luenen | července 04, 2019

    Thankyou Tony, This was very helpful! For anyone not fluent in programming (like myself) DESIGN workspace> TOOLS Tab> ADD-INS dropdown> script and addins> Add-ins tab> DXF4Laser> Edit (you may need to restart fusion after editor installs)> Change 'SketchPanel' to 'SolidModifyPanel' in add_button and remove_button Button will appear In SOLID tab> Modify (Restart of fusion may be required) Hope that helps

    Steve Wilkin | srpna 21, 2019

    Thanks Tony, and Matt for this, the fix worked fine. What a relief!

  • Excellent Add-in
    Christo Candiotes | května 16, 2018 Ověřené stažení (Co je to?)

    I could't select multiple faces but otherwise it worked perfect for all my 2D sketches I had to convert to .dxf. 

  • Save a lot of time, easy to use
    Kamol Chuengsatiansup | května 02, 2018 Ověřené stažení (Co je to?)

    Before this add on, I have to manually offset each line.

    This add on save me a lot of time.

  • Great stuff
    Dimitry Gorodetsky | března 25, 2018 Ověřené stažení (Co je to?)

    I've lost couple hours before download this script and make all I want literally in minutes. Super tool, thanx!

    But, want make a suggestion:
    On my CNC acceleration/decelleration takes so much time, so if cutting trajectory have sharp corners, laser stops over ot and overburns that corner. It will be good, if resultant countour will have some rounding (arcs, e.g.) in that places, so machine will travel over corners in more smooth manner

  • Best App for Fusion 360
    B Rauter | února 21, 2018 Ověřené stažení (Co je to?)

    Thank you so much, you really saved me from the nightmare of using the inbuilt DXF export...

    B Rauter | března 16, 2018

    Unfortunately now I have the same issues with this tool during DXF export which i had with the inbuilt feature in Fusuon360 before. Every line is moved and open geometry's everywhere :(

    Ross Korsky (Vydavatel) | března 21, 2018

    This tool uses the built in DXF export function. It just does what it can to make a clean, and offset, sketch first. It sounds like you have a legitimate bug to report with the DXF export. The only way I know of to report a bug is on the Fusion 360 forums.

  • kws1070
    Kim Wooseong | listopadu 26, 2017 Ověřené stažení (Co je to?)

    Great~!! This app save a lot of time. Thanks so much.

  • Thank you very much
    Evgeny Ivakhnik | listopadu 03, 2017 Ověřené stažení (Co je to?)

    good export to dxf, want to donate you, but have no paypal. maybe you have some other payment systems?

    Ross Korsky (Vydavatel) | listopadu 08, 2017

    Any and all Tips/Donations are welcome at https://www.paypal.me/korsky I'm glad this tool can help!

  • What a Ripper!
    Ian Schutt | října 20, 2017 Ověřené stažení (Co je to?)

    Simple Effective Accurate Wonderful! Six Stars! ☆☆☆☆☆

    Ross Korsky (Vydavatel) | listopadu 08, 2017

    Thank you for the kind words and your rather generous donation too! (P.S. that's still 5 stars ;)

  • Love it. Can you add component name?
    Edvin Axel | října 14, 2017 Ověřené stažení (Co je to?)

    I love your plugin! An awesome feature would be the feature to autamaticaly add the component name to the part when working with large projects

  • Great and super handy!
    Marco Lurati | srpna 24, 2017 Ověřené stažení (Co je to?)

    I was using the default option for Fusion to export the dxf files, but it was very annoying and time consuming, and actually our lasercutter doesn't open them, I had to open Illustrator to export them again to make it work. The plugin just brilliantly solve everything and it even separate different paths on different layers so that it's possible to set up the cutting parameter individually and choose the cutting order. The automatic naming is also very handy (component - body.dxf). One last thing to make it perfect (for me at least) would be to add the choice to close/join the paths in a continuous one so that I don't have to do it in the software of the lasercutter.

    Ross Korsky (Vydavatel) | listopadu 08, 2017

    I'm sure each laser cutting software handles things a bit differently but I've also noticed the generation of rather silly cut sequences (using VisiCut) from time to time myself. Largely this has not been an issue for me, aside from adding a little to the cut time, as I have the privilege of having access to a very nice laser cutter (but I do not own one myself) with high accuracy and repeatability so I don't get any start/stop artifacts of note - but I can see how for large cuts it would be helpful to keep cut times down and for cutters with less positional repeatability there could be some un-wanted start-stop artifacts as well. I'm not sure how best to optimize the DXF file, or how practical it would be to do so. Saying "DXF file" is sort of like saying "XML file" - there is little standardization outside of some key "elements" and conventional use of command codes. I'm curious how you prepare the files for cutting, does your software package largely handle the path optimizations automatically, or is it a lot of manual work? What software do you use? Would you be willing & able to share a before and after DXF file with me - preferably one that is "simple" (with a reality minimal set of shapes and lines) but at the same time exercises many common cases? Feel free to e-mail me directly at ross.korsky@gmail.com

  • Works a lot better than trying to export the sketches
    Michael Olson | července 06, 2017 Ověřené stažení (Co je to?)

    Got clean results without nearly as much hassle.

    岑 姜 | července 23, 2018

    Simple Effective Accurate Wonderful! Six Stars

  • This Would be a Fantastic Tool, if...
    David Persuhn | prosince 19, 2016 Ověřené stažení (Co je to?)

    This tool seems like it would be about the handiest thing around, were it not for the non-manifold face issue. I want so badly to use it to eliminate all of the manual offset geometry creation I have to do in Lasercad to account for kerf width, but every single face I try comes up as being non-manifold. I sure hope that feature gets added.

  • A improvement
    Daniel Lyall | listopadu 03, 2016 Ověřené stažení (Co je to?)

    It would be good if you could pick more than one face if the part to be cut was already nested It produces a clean .dxf what is realy good

    Mark Hanford | ledna 30, 2017

    This would be really useful. Right now I can't really use this plugin, because any text I have added to a component causes holes in the output because I can't select the face that is the centre of an "O" for example.

  • Great Idea and nice script!
    Fabian Schurig | října 30, 2016 Ověřené stažení (Co je to?)

    Works perfect for simple and medium contours. Will make my life much easier! It is also very fast! But it needs some improvement for complex geometries. Would be nice if you could generate an Add-In out of your Script.

Přejít nahoru