Consecutive NumbersWin64, English
General Usage Instructions
This add-in can be used in two simple steps:
A sketch line needs to be created.
The numbers will be distributed along the selected line, from the beginning point to the endpoint.
This sketch line must be a 2d sketch line.
Exit the sketch.
You can find the add-in in the "SOLID" tab under "CREATE".
Define the number chain.
Select the start and the end number, where the start number has to be smaller than the end number.
Define the extrusion with the distance and the operation cut, join, intersect, or new body.
Select the sketch line.
After clicking "OK" the numbers will be created in the sketch of the selected line and then extruded.
The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. Or, simply double-click the downloaded installer to install the app/plugin.
You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.
Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Autodesk® Fusion 360™.
To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button.
Or, you can uninstall it from 'Control Panel/Programs and Features' (Windows 7/8.1/10), just as you would uninstall any other application from your system.
|Version Number||Version Description|
|- angle of text now relative to curve/line - numberchain now along various sketch curves - numbers can now be created in reverse order - text can be set above or below curve|
|Initial release - Rotation bug fix. - Added new icons|