Bevel Gear DesignWin64, English
General Usage Instructions
Go to create menu dropdown and select create Bevel Gear.
Provide input values in user interface and then click on ok.
Move the component to a desired location and after OK, hit the position button in the menu.
The installer that ran when you downloaded this app/plug-in from Autodesk App Store has already installed the app/plug-in.
OR, simply double-click the MSI to install the app.
You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.
Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Autodesk® Fusion 360™.
To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button.
OR, you can uninstall it from 'Control Panel\Programs\Programs and Features' (Windows 7/8/8.1/10), just as you would uninstall any other application from your system.
Please take care of moving the component as the bevel gear component gets created at the origin.
Supports only straight Bevel Gear.
Fails to generate output in following conditions:
- Face width given either exceeds cone distance (greater than pinion pitch radius) or less than 0.3 times pinion pitch radius.
- Gear ratio selected is such that number of teeth in gear divided by gear ratio is less than 12.
- Combined Values of both module and no of teeth's in gear is less than required to generate bevel gear.
Email us at email@example.com for any query or issue.
Call Us: +91 20 4009 8381.
Centre for Computational Technologies, 1 Akshay Residency, 50, Anand Park,Aundh. Pune - 411007 Maharastra, India
|Version Number||Version Description|
|Supports Bevel Gear|