CloudNC CAM Assist is an Autodesk® Fusion® Add-In that has its own panel in Fusion Manufacture space. The Add-In displays different tabs where users can control geometry settings, toolsets, and toolpath types, as long as roughing & finishing general behavior.

General information about how to use CloudNC CAM Assist can be found here: https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/6455333/CAM+Assist+s+Fusion+360+Panel.

Users can find an easy-to-follow Getting Started guide here: https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/1278133/Getting+Started.

Install:
Simply double-click the .pkg to install the app. For further info, visit https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/23658497/How+to+Install+CAM+Assist+MacOS

Uninstall:
You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.
Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Fusion.
To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply open Utilities > Add-ins, go to the Add-ins tab, right-click on CAMAssist, click on Open file location, and finally delete the CAM Assist folder.

You can find additional information about CAM Assist on our documentation portal: https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/4751528/Introduction

Detailed instructions about the installation process can be found here: https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/23658497/How+to+Install+CAM+Assist+MacOS

Detailed instructions about uninstalling CAM Assist: https://cloudnc.atlassian.net/wiki/spaces/CAF3UD/pages/3605480/Uninstalling+CAM+Assist