Sam's Cookie Cutter Maker - BellaWin64, English
General Usage Instructions
Click on the Add-in button (blue gingerbread man) in the Solid panel to launch the cookie cutter maker dialog.
Select a sketch profile and adjust the cross-section parameters. When you click the "OK" button the command will generate the cookie cutter model.
If you choose to launch the 3D print command then the 3D print dialog will appear and you can just select the 3D model that was just created and send it to your favorite print utility.
Please visit our tutorials page on our website: here
You can download step by step instructions: here
The installer that ran when you downloaded this app/plug-in from Autodesk App Store has already installed the app/plug-in.
OR, simply double-click the MSI to install the app.
You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.
Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Fusion 360.
To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button.
OR, you can uninstall it from 'Control Panel\Programs\Programs and Features' (Windows 7/8.1/10), just as you would uninstall any other application from your system.
For support questions or issues you can reach us at: firstname.lastname@example.org at any time.
You will receive a response within 24 hours.
|Version Number||Version Description|
|Increase ranges: - Wall thickness (now 0.6 mm to 1 mm) - Handle Size (now 4 mm to 8 mm) Added option to bypass re-sizing the cutter Added algorithm that tries different offset values when offset errors are found Improved error messages|