Knurl maker

Knurl maker

Shwivel
Paid

OS:
Language:

Description

Available features:

  • different pattern types for surfaces:
  •  - cylindrical (straight, diagonal, crossed, diamond - male/female)
  •  - conical (not elliptical - straight, diagonal, diamond - male/female)
  •  - toroidal (straight, diagonal)
  •  - NURBS (straight, diagonal)
  • selecting multiple faces
  • knurl for entire length of surface or defined
  • offset of start (if not entire length)
  • length of knurl (if not entire length)
  • swapping start-end side
  • TPI (from 8 - coarse to 80 - fine)
  • knurl angle (70, 80 or 90 degrees)
  • crossed teeth number (for crossed pattern)
  • helix angle (10 - 45 deg, for diagonal and diamond patterns)
  • teeth direction (for diagonal and diamond patterns)
  • tip lattening factor (0 - 1, height = factor * half of tooth's depth)
  • fillet factor for grooves and tips (0 - 0.2, fillet radius = factor * tooth's height)
  • showing progress

 

Execution of the plugin generally takes less than a minute on i7/8GB RAM/512GB SSD computer for 20mm diameter cylinder and medium TPI. For a large number of teeth, faces with complicated geometry (torus, NURBS), diagonal and diamond patterns it can take few minutes per face. During the operation a progress bar with the current step is visible.

 

Disclaimer:

Please make sure that the section or load analysis is done (if necessary) for things changed by this plugin. Remember that without tests they can break during load and cause damages, severe injuries or death of people.

Read Help Document

About This Version

Version 1.0.2, 12/28/2019
**Version 1.0.2 (2019-12-18):** Fixes: * bug when axis of face equals Z-axis **Version 1.0.1 (2019-12-16):** Fixes: * bug during starting Fusion **Version 1.0.0 (2019-12-15):** Available settings: * different pattern types for surfaces: * cylindrical: * straight, * diagonal, * crossed, * diamond (male), * diamond (female), * conical (not elliptical): * straight, * diagonal, * diamond (male), * diamond (female), * toroidal: * straight, * diagonal, * NURBS: * straight, * diagonal, * selecting multiple faces, * knurl for entire length of surface or defined, * offset of start (if not entire length), * length of knurl (if not entire length), * swapping start-end side, * TPI (from 8 - coarse to 80 - fine), * knurl angle (70, 80 or 90 deg), * crossed teeth number (for crossed pattern), * helix angle (10 - 45 deg, for diagonal and diamond patterns), * teeth direction (for diagonal and diamond patterns), * tip flattening factor (0 - 1, height = factor * half of tooth's depth), * fillet factor for grooves and tips (0 - 0.2, fillet radius = factor * tooth's height) * showing progress

Screenshots and Videos


Customer Reviews

(1 review)

|

Get Technical Help
  • AMAZING
    James Rothwell | January 26, 2020 Verified Download (What's this?)

    Exacly what i was looking for, works perfect and saves me so much time doing it manualy.

Go top