# ModelingPlus V1.1E

Fizetve, Ingyenes 30 napos próbaidőszak
OPERÁCIÓS RENDSZER:
Nyelv:

## Leírás

1. Occurrence (component) creation command

Creates an occurrence (component) specifying the origin position and X and Z directions.

2. Construction point creation command

Creates a construction point (construction point) that specifies the coordinate position.

3. Construction surface creation command

Creates a construction plane that specifies the coordinate position and direction.

4. Sketch point creation command

Creates sketch points that specified a 3D coordinate point group (Excel linked).

5. Horizontal sketch lines creation command

Creates horizontal sketch lines that parallel to the X-axis of the sketch plane (Excel linked).

6. Vertical sketch lines creation command

Creates vertical sketch lines that parallel to the Y-axis of the sketch plane (Excel linked).

7. Specified long straight sketch line creation command

Creates a straight sketch line that passes through two points of the specified length.

8. Polyline creation command

Creates a polyline that is consisting of several continuous straight sketch line segments (Excel linked).

9. Arc creation command by specifying two points and a radius

Creates an arc that passes through the start point → end point (swells to the right of the start point → end point).

10. Fit points spline curve creation command

Creates a fit-point spline curve that passes through a set of specified passing points (Excel linked).

## Verzióinformáció

Verzió V1.1E, 2023. 10. 02.
Occurrences (components) can be created at specified positions. This allows you to create a sketch plane at a specified position and in a specified direction. You can create construction points and construction planes at specified positions. In sketch mode You can create a straight line that passes through two points in addition to the horizontal and vertical that specify the length. You can create an arc that passes through two points and specifies the radius. You can create a 3D polyline given a set of vertices. You can create a 3D fit spline given a set of vertices.

## Ügyfélértékelések

1 értékelés
Műszaki segítségnyújtás
• Very useful set of tools
Nicolas Beaudoin | március 24, 2023 Ellenőrzött letöltés (Mit jelent ez?)

I use it weekly and well worth the price