Spur Gear Creator

Spur Gear Creator

Graham Chow
Fizetve, Ingyenes 30 napos próbaidőszak

OPERÁCIÓS RENDSZER:
Nyelv:

Leírás

The features of this gear creator are:

1) You can design a gear that uses a single largest bit to the machine.

2) It can create a pocket so you can easily machine the other side of the gear.

3) It uses the undercut to define the fillet. You can also specify an ellipse for the fillet to give an unusual looking gear.

Súgó dokumentáció elolvasása

Verzióinformáció

Verzió 1.101, 2020. 09. 25.
Support toolbar. Added in "Spline Point Scale" so you can adjust the number of points of the involute spline at a performance cost. Support spur gear sketch so you can use it for laser cutting. Improved performance on mac os.

Képernyőfelvételek és videók


Ügyfélértékelések

(14 értékelés)

|

Műszaki segítségnyújtás
  • Is this one still able now?
    乔 治 | szeptember 03, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Even the system told me it is loaded, but I can't find where to start it? Where is it? Is it expired?


    Thomas Hohlfeld | szeptember 10, 2020

    i found it: construction --> tools --> module


  • Some thing odd happening with lager number of tooth
    Daniel Schmidt | február 27, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Hi Patrick, i observe a strange behavior when increasing the number of tooth (i leave all settings as default, but change the teeth number) starting with 3 is normal, passing the 40 tooth the tooth kind of overlap. Also when selecting the contour for CNC milling: the smaller gears work find. The larger gears you have to select edge by edge. thanks for your help Daniel


  • Sketch Missing
    Patrick Edwards | február 02, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Initial sketch missing from the gear profile


    graham chow (Közzétevő) | február 05, 2018

    Hi Patrick, this is as designed. Maybe in a future release, it can be supported.


  • Decu
    Patrick Vanquelef | január 12, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    J'ai le même problème que Carsten Müller . Cela ne fonctionne pas correctement et plein d'extrusion en jaune dans le timeline. Merci de votre réponse


  • Great!
    Patrick Pronovost | július 18, 2017

    i needed to make a replacement gear for a RC toy and it was a snap to make with this I am more then happy buying it knowing it works and will be useful when I need it next.


  • OD locked up in the menu.
    Jocelyn Sicotte | május 28, 2017

    You cannot make a gear of a specified OD outside diameter. The OD is fixed based on the parameters you insert. NOT nice.


    Angus Young | január 11, 2018

    Outer diameter is determined by several variables, it's not stated explicitly when designing a gear. I would suggest you watch this video. https://www.youtube.com/watch?v=ZakT54JIhB8


  • I'm Sure It's Great But,
    Colton Tshudy | május 05, 2017

    I'm not able to use this addon because C++ Add-Ins don't work for some reason. If anyone knows a fix please drop a reply.


  • good add-on, would be amazing if...
    Brian Greeson | február 03, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Thank you for creating this add-on, very useful. Having the ability to select a standard profile (GT2, GT3, MXL, etc.) would make this awesome for creating pulleys too.


  • Small improvement
    Joe Dohm | november 14, 2016

    It would be great if a note was made of the settings used to create a gear


  • Great App
    Raymond Yuhasz | július 08, 2016 Ellenőrzött letöltés (Mit jelent ez?)

    Hi Graham, I love the app, very helpful. Is there a possibility to add an internal gear option....such as the ring gear in a planetary gear set? Thanks!


    Alexander Wigen | október 26, 2016

    Yes please add the ability to make internal gears!


  • align Gears
    Isak Thjellesen | június 10, 2016

    Would it be possible for you to add contact point circle. It would be extremely useful to align the Gears up.


    graham chow (Közzétevő) | június 11, 2016

    yes, will do in the next update


  • Nice tool but
    Carsten Müller | május 20, 2016

    it removes the sketches leaving a bunch of yellow extrudes in the time line.


    graham chow (Közzétevő) | május 26, 2016

    I see the issue. I should be able to fix it up in an update.


  • Great For Quick Laser Cutting and Rapid Prototyping
    Ashley Hartwell | április 30, 2016

    Program is really simply to use, one must simply specify pitch, pressure angle, and and teeth number and Fusion 360 does the rest. I do wish there was a toggle feature for english unit gears


    graham chow (Közzétevő) | május 02, 2016

    It does use the units that you specify in the browser part of the document - section 5 (http://fusion360.autodesk.com/learning/learning.html?guid=GUID-E647CA56-7187-406A-ACE4-EAC59914FAE4). However you would need to reopen the add in.


  • Good
    Mike Geyer | április 28, 2016

    Good

Ugrás a tetejére