Helical Gear Generator


Helical gears resemble spur gears with the teeth at an angle. They can be meshed in parallel or crossed orientations at 90 degrees or arbitrary angles and can be generated with as little as a single tooth forming a screw gear.


Gears may be specified in either the 'Normal' or the 'Radial' system or the fixed profile Sunderland standard, any of which can be generated as either Left or Right handed. Handedness in helical gears refers to the direction the teeth lean when the gear is placed flat on a table.


Using this add-in, proper Herringbone gears (such as the gears used for this add-in's thumbnail) can be created by using a Sunderland profile then mirroring the gear about one of its faces. In the case of Herringbone or other double-helix gears, the handedness of the base gear is not as significant as it is for single helix gears - to effectively change the handedness of a Herringbone / double helix gear all you need to do is flip it over - whereas for a single helix gear it must be mirrored to change its handedness.


Finally, by setting a helix angle of 0 degrees, Spur gears can be created and defined in the metric system (as opposed to the sample Spur Gear script which defines gears in the American system) with this add-in.


Be sure to check out the Gear Down For What YouTube channel and on thingiverse - he is doing some amazing things with Helical Gears!


ATTENTION MAC USERS: If you experience issues with the installer please see this article first. Then if you still have trouble installing the plugin e-mail me (ross.korsky@gmail.com) and I will provide a workaround.


Verzió 1.0.4, 2021. 10. 06.
1.0.4 Fix: Fusion 360 May 2020 update breaks loft creation of tooth geometry.

Képernyőfelvételek és videók


37 értékelés
Műszaki segítségnyújtás
  • Yay!
    Patrick Matthews | március 23, 2023 Ellenőrzött letöltés (Mit jelent ez?)

    Dude! I have been stuck for years trying to create a set of crossed helical gears for a 1920's gas engine model, and now I can! This set is in inches but I was able to noodle out the metric equivalents. 


    Looking forward to experimenting with the backlash setting... I want to print a working set for a model, and my resin prints are usually a little "fat" on the surface. Is the lash mm setting an equivalent normal offset of the surface?

  • screw gears
    dimitrii tomin | október 10, 2022 Ellenőrzött letöltés (Mit jelent ez?)

    how to make the screw gears? I cant find it.

    Ross Korsky (Közzétevő) | október 13, 2022

    Screw gears are simply a low tooth count helical gear with a very high helix angle. The one pictured has 4 teeth but you can go as low as 1 tooth. Such a gear is easiest to define in the "normal" system as the diameter of the gear is then a free variable - in other words expect a low tooth count gear to have a large diameter. The real trick is to realize that this is a crossed-helix application - notice that the direction of rotation of input to output is shifted by 90 degrees. In a standard mesh you would create 2 gears with the same helix angle and of opposite hands. In a crossed mesh like this you create 2 gears of the SAME hand whose helix angles add up to the desired mesh angle (90 in this case). For example to create a 40:1 ratio with a 1 tooth screw and 40T spur you could use a helix angle of 80 degrees on the screw (1T) and a helix angle of 10 degrees on the spur (40T) both of EITHER left OR right handedness. Yes, you can create gears that mesh at other angles - it doesn't have to be 0 or 90 it can be anything but at some point it will make sense to flip the handedness of one of the pair - for example one could think of a left handed gear as simply a right handed one with a greater than 90 degree helix angle. Note that what you'll end up with is a screw gear mesh NOT a worm and worm gear. Screw and worm gear meshes serve the same general purpose but worms can be used for considerably higher load applications than screws. A true worm mesh has a line of contact between the meshing faces which allows it to transfer considerably higher loads than the point contact of the screw mesh where the teeth are literally contacting at only a single point. Be sure to use a lubricant (white lithium grease, etc., assuming plastic) after a break in period to prolong the gears lifetime.

  • Thanks!
    Luca Cimmino | március 09, 2022 Ellenőrzött letöltés (Mit jelent ez?)

    It works great!

  • Excellent
    Katherine Tomczynska | január 27, 2022 Ellenőrzött letöltés (Mit jelent ez?)

    Top addin

  • Awesome
    Fedor Zavyalik | április 17, 2021 Ellenőrzött letöltés (Mit jelent ez?)


  • Great tool
    Zach Wyatt | március 31, 2021 Ellenőrzött letöltés (Mit jelent ez?)

    Very consistent and does the job very well. Much faster and more consistent than by hand. Great job!

  • Wrong dimension
    Olivier Lanneau | március 25, 2021 Ellenőrzött letöltés (Mit jelent ez?)

    Works great for spur gear, but dimension are wrong with an helix angle.

    Make a gear module 1mm with 31 teeth and draw on it a circle of 31mm diameter. The primitif diameter of the gear is much bigger than the 31mm circle.

    my parameters : Normal system, right, 30deg, 20deg, 1mm, 31, 0mm, 10mm

    Hope you could fix it, thanks

    Ross Korsky (Közzétevő) | április 20, 2021

    See the hover text / image on the Gear Standard field. Use the radial system (not normal system) for the behavior you are looking for (where module and tooth number result in a fixed gear diameter independent of helical angle). In the normal system changing the helical angle will change the gear diameter.

  • Excellent!
    Albert Questiaux | március 13, 2021

    Easy to use and also great for worm gears too. Just what I needed thanks. Just cant edit the gear once created in fusion.

    Now what about bevel and spiral bevel gears ... your next challenge.

    Ross Korsky (Közzétevő) | április 20, 2021

    Correction - screw gears, not worm gears. Cross helical mesh (aka screw gears) as can be made with this plugin have a point contact while worm gears have a line of contact and can carry significantly more load. I've dabbled with generating bevel gears but they are surprisingly not very standardized with multiple common tooth profiles in use for various reasons, mostly to do with manufacturing methods. My exploration into spherical involute profiles (which I did many years ago now) never got beyond the proof of concept stage, but I did manage to generate a few bevel gear profiles but IIRC fusion started to really chug on more than moderate tooth counts (I'm sure it would do better these days - they have made a lot of performance improvements over the years). As for spiral gears... the math gets nuts and it's frankly beyond me to work out for myself and I never found a source for generating the gear profiles programmatically - nor had the need myself to really force me to figure it out :P

  • I want Win64
    生 贾 | március 09, 2021 Ellenőrzött letöltés (Mit jelent ez?)

    I want Win64

  • Outstanding
    Jorge Bula | október 09, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Thanks, excelent app

  • Lovely!
    Shane Galvin | augusztus 18, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Works for what I need. Wish it were parametric but oh well.

    And another thing: the bodies created are named "Healical Gear"... just a quick fix to line 877. ;)

  • herringbone gear is wrong
    Muhammet Ali Bulat | június 29, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    I created two herringbone gear in surrender mode. first 18 tooth and second 72 tooth. they are not compatible. neither in the program nor in the 3D output.

    Ross Korsky (Közzétevő) | július 02, 2020

    Did you remember to make one left handed and the other right handed? Helical gears must be of opposite hands to mesh in classical gearing applications.

  • Great generator
    Alex Axenti | június 27, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    I really like it, quick and easy to use 

  • fantastic
    Adrian Sippitt | május 22, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Brilliant, thanks so much

  • Exactly what I was looking for
    Mustafa Naser | március 25, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Thanks a lot

  • This is so good!
    Michael Hwang | március 21, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    This is really good, and can generate regular spur gears as well if you set the helix to 0 degrees.

    Ivan Korotchenko | március 01, 2020 Ellenőrzött letöltés (Mit jelent ez?)


  • Very Helpful
    Eric Soderberg | január 03, 2020 Ellenőrzött letöltés (Mit jelent ez?)

    Great sucess using this generator to make function 3d printed gears.  A requested new feature would be the option to create a tapered helical gear.

  • Works good
    max ist | október 03, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    Easy to install, easy to use, perfect result - excelent! Thanks.

  • Thanks
    karam Mohammed | július 24, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    Thank you very much 

  • Nice!
    Erick Espinoza | május 01, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    Works pretty good!

  • useful tool
    Pablo Costas | április 15, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    Installer worked for MacOS without a problem.

  • Just what I needed
    Matt Whipple | április 06, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    Simple to use. Works great.

  • Thanks!
    Yuriy Skvortsov | február 08, 2019 Ellenőrzött letöltés (Mit jelent ez?)

    The installer still does not work for MacOS, but Ross was kind to provide a usable package by e-mail. The addon works great! Really easy to use and results are perfect.

  • Addendum with Radial sustem.
    Radek J | augusztus 12, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Addendum and dadendum doesn't seem to do anything in Radial system. 

  • Thanks !!!
    Sergey Bob | július 22, 2018

    Very many thanks !


  • Works great
    Thomas Fort | május 20, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Very easy to use and gave me exactly what i needed

  • Inside gear?
    Colin Bradburne | április 05, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Great gear generator.

    Can this also be used to generate the gear for the inside of a ring and not just the outside?

  • Awesome
    Rusty Nielsen | február 16, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    Great add-in!

  • Excellent for herringbone gears
    Nick Biederman | november 27, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    This plugin is perfect for creating herringbone gears

  • Thanks!
    Igor Andreev | július 17, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Thank you! Very comfortably!

  • Works Great!
    Michael Thiesen | június 05, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Parameters are well documented and the resulting gears mesh nicely.

  • Keeps crashing Fusion
    Bjørn Borud | május 27, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Haven't been able to use it since it consistently crashes Fusion 360.

  • Excellent!
    Darrell Nevers | május 20, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    This definitely makes life quite a bit easier for designing gear boxes! Only downside is that the tooth count input won't accept parameters; it just throws an error – "Teeth – must be greater than 0." – when I try to use a pre-defined parameter

  • Thanks!!
    Sai Kishore | február 03, 2017

    Thanks for the addon

  • Change active units
    Brian Stewart | január 18, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Be nice to select either metric or inch for the units. Or have it use the default units for each design. Not everyone uses metric.

  • Exactly what I was looking for!
    Box Jockey | december 06, 2016 Ellenőrzött letöltés (Mit jelent ez?)

    Easy to use and the results are fantastic!!

Ugrás a tetejére