Nifty Dogbone for Autodesk® Fusion 360™

Nifty Dogbone for Autodesk® Fusion 360™

Ekins Solutions LLC

Digitally signed app

평가판

OS:
언어:

설명

A fast and robust tool for adding dogbone fillets to the inside corners of a model. See the video below and the full product description at EkinsSolutions.com for complete information about what this add-in does and how to use it.

 

What you're installing is a fully functioning version of the add-in that will work for 30 days. After 30 days you must purchase a license to continue to use it. 

 

Note: This app uses a custom installer (and not the standard App Store installer).

도움말 문서 읽기

이 버전 정보

버전 1.3.0, 2021-02-18
1. Fixed a problem where the small icon in the “Update Dogbones” command was too large. 2. Fixed a problem where an error would appear when right-clicking on a Setup in the Manufacturing workspace. 3. Enhanced how dogbones are calculated for acute angles. The cutout on the left shows the corner without a dogbone. The cutout in the middle shows the dogbone that was created with the previous version of Nifty Dogbone. It created geometry that was unreachable. Additional material is now removed to make the corner accessible by the tool.

스크린샷 및 비디오


고객 리뷰

(4 리뷰)

|

기술 도움말 보기
  • Awesome!!!
    Federico Mingramm | 2월 19, 2021 다운로드 확인 (이것은 무엇입니까?)

    One of the best add-in saves tons of time!! Thanks a lot!


  • That's fantastic
    Jonathan Gunning | 10월 29, 2019 다운로드 확인 (이것은 무엇입니까?)

    Autodesk should do a deal with you and roll this into the base f360 package. Huge time and tedium saver.


  • Works Perfectly!
    Saleem Banatwala | 4월 29, 2019 다운로드 확인 (이것은 무엇입니까?)

    This is exactly what I needed for my project!


  • Realy Cool!
    Sascha Kling | 4월 24, 2019 다운로드 확인 (이것은 무엇입니까?)

    , i love it !!! Thank you very much !!!

맨 위로 이동