Spur Gear Creator

Spur Gear Creator

Graham Chow
지불됨, 30일 무료 평가판

OS:
언어:

설명

The features of this gear creator are:

1) You can design a gear that uses a single largest bit to machine.

2) It can create a pocket so you can easily machine the other side of the gear.

3) It uses the undercut to define the fillet. You can also specify an ellipse for the fillet to give an unusual looking gear.

도움말 문서 읽기

이 버전 정보

버전 1.07, 2016-05-25
Removed the creation of construction plane artifact. Works with "do not capture design history"

스크린샷 및 비디오


고객 리뷰

(13 리뷰)

|

기술 도움말 보기
  • Some thing odd happening with lager number of tooth
    Daniel Schmidt | 2월 27, 2018 다운로드 확인 (이것은 무엇입니까?)

    Hi Patrick, i observe a strange behavior when increasing the number of tooth (i leave all settings as default, but change the teeth number) starting with 3 is normal, passing the 40 tooth the tooth kind of overlap. Also when selecting the contour for CNC milling: the smaller gears work find. The larger gears you have to select edge by edge. thanks for your help Daniel


  • Sketch Missing
    Patrick Edwards | 2월 02, 2018 다운로드 확인 (이것은 무엇입니까?)

    Initial sketch missing from the gear profile


    graham chow (게시자) | 2월 05, 2018

    Hi Patrick, this is as designed. Maybe in a future release, it can be supported.


  • Decu
    Patrick Vanquelef | 1월 12, 2018 다운로드 확인 (이것은 무엇입니까?)

    J'ai le même problème que Carsten Müller . Cela ne fonctionne pas correctement et plein d'extrusion en jaune dans le timeline. Merci de votre réponse


  • Great!
    Patrick Pronovost | 7월 18, 2017

    i needed to make a replacement gear for a RC toy and it was a snap to make with this I am more then happy buying it knowing it works and will be useful when I need it next.


  • OD locked up in the menu.
    Jocelyn Sicotte | 5월 28, 2017

    You cannot make a gear of a specified OD outside diameter. The OD is fixed based on the parameters you insert. NOT nice.


    Angus Young | 1월 11, 2018

    Outer diameter is determined by several variables, it's not stated explicitly when designing a gear. I would suggest you watch this video. https://www.youtube.com/watch?v=ZakT54JIhB8


  • I'm Sure It's Great But,
    Colton Tshudy | 5월 05, 2017

    I'm not able to use this addon because C++ Add-Ins don't work for some reason. If anyone knows a fix please drop a reply.


  • good add-on, would be amazing if...
    Brian Greeson | 2월 03, 2017 다운로드 확인 (이것은 무엇입니까?)

    Thank you for creating this add-on, very useful. Having the ability to select a standard profile (GT2, GT3, MXL, etc.) would make this awesome for creating pulleys too.


  • Small improvement
    Joe Dohm | 11월 14, 2016

    It would be great if a note was made of the settings used to create a gear


  • Great App
    Raymond Yuhasz | 7월 08, 2016 다운로드 확인 (이것은 무엇입니까?)

    Hi Graham, I love the app, very helpful. Is there a possibility to add an internal gear option....such as the ring gear in a planetary gear set? Thanks!


    Alexander Wigen | 10월 26, 2016

    Yes please add the ability to make internal gears!


  • align Gears
    Isak Thjellesen | 6월 10, 2016

    Would it be possible for you to add contact point circle. It would be extremely useful to align the Gears up.


    graham chow (게시자) | 6월 11, 2016

    yes, will do in the next update


  • Nice tool but
    Carsten Müller | 5월 20, 2016

    it removes the sketches leaving a bunch of yellow extrudes in the time line.


    graham chow (게시자) | 5월 26, 2016

    I see the issue. I should be able to fix it up in an update.


  • Great For Quick Laser Cutting and Rapid Prototyping
    Ashley Hartwell | 4월 30, 2016

    Program is really simply to use, one must simply specify pitch, pressure angle, and and teeth number and Fusion 360 does the rest. I do wish there was a toggle feature for english unit gears


    graham chow (게시자) | 5월 02, 2016

    It does use the units that you specify in the browser part of the document - section 5 (http://fusion360.autodesk.com/learning/learning.html?guid=GUID-E647CA56-7187-406A-ACE4-EAC59914FAE4). However you would need to reopen the add in.


  • Good
    Mike Geyer | 4월 28, 2016

    Good

맨 위로 이동