Sketch Checker
무료
OS:
언어:

설명

Sometimes it can be difficult to identify at which point the sketch is not properly closed, and so it cannot be used as a profile for solid creation, e.g. Extrude.


This add-in tries to help with that problem by identifying curves that do not connect to other curves leaving the loop open.

이 버전 정보

버전 1.2.0, 2019-01-18

Updated to support latest version of Fusion 360

스크린샷 및 비디오


고객 리뷰

13 리뷰
기술 도움말 보기
  • Awesome
    SKIOLD NINO | 3월 19, 2021 다운로드 확인 (이것은 무엇입니까?)

    Really helpful. Thanks.


  • doesn't do anything...?
    Hannah Kissick | 12월 05, 2020 다운로드 확인 (이것은 무엇입니까?)

    I have a sketch with snowflake shapes that came in all "exploded", as in hundreds of lines which aren't actually connected, making it impossible to extrude or trace operation. when this plugin is ran, nothing happens. no warnings, no popups, just... nothing happens. it did give an error when I didn't have the sketch active, so that made sense. but when sketch is active it won't run.

    Adam Nagy (게시자) | 12월 08, 2020

    This page has a link "Read Help Document" with more information about this app: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=8050506996211430178&;appLang=en&os=Mac The app will just simply select/highlight the sketch points of the curves that are not connected. So please make sure no geometry is selected in the sketch before running it so the result will be more obvious.


  • Super
    Abbo Bx | 10월 30, 2020 다운로드 확인 (이것은 무엇입니까?)

    Great add-in, works very well, thank you for sharing your job!


  • Please
    moon young Kim | 1월 06, 2020

    Please publish a Win64 version of this app!

    Daniel Hops | 9월 23, 2020

    Yes, please!

    Steve Hesby | 12월 05, 2020

    Please!


  • Works perfectly
    Carl Smith | 9월 19, 2019 다운로드 확인 (이것은 무엇입니까?)

    Thank you - this saves so much time.


  • THANK YOU
    james | 2월 18, 2019 다운로드 확인 (이것은 무엇입니까?)

    It was only a simple loop but it had over 50 elements.. finding this add on just saved me half an hour. soo quick, will be using this in the future :)


  • Super Useful!
    Tom Johnson | 2월 05, 2019 다운로드 확인 (이것은 무엇입니까?)

    Worked exactly as advertised.  Thank you!


  • Thank!
    Django Soeterboek | 11월 16, 2018 다운로드 확인 (이것은 무엇입니까?)

    Saved me a lot of time correcting a imported dxf!


  • perfect !
    Zoltan Toth | 12월 13, 2017 다운로드 확인 (이것은 무엇입니까?)

    Save my life sometimes when I spend hours to find tiny errors .... :p


  • Wow!
    Jeffrey Hedrick | 12월 02, 2016 다운로드 확인 (이것은 무엇입니까?)

    I have only tried on simple examples but if this works without crashing, it will be one of the best plug ins imaginable. Thanks for working on this great feature!!!!


  • It crashed program twice, sometimes it works
    Nathaniel Price | 10월 30, 2016 다운로드 확인 (이것은 무엇입니까?)

    Sometimes it works ok, but on two separate occasions it crashed program

    Adam Nagy (게시자) | 10월 31, 2016

    Hi Nathan, Could you please contact us on the support email (fusion.apps@autodesk.com) and provide more info about when exactly the program crashes? Maybe the error message that pops up - if any? Thank you, Adam


  • Very useful
    Dmitry Zaprudnov | 7월 12, 2016 다운로드 확인 (이것은 무엇입니까?)

    It will be great to see more functions in this app, but however even now it really makes life easier.


  • Big thank's
    Peter Böker | 5월 22, 2015 다운로드 확인 (이것은 무엇입니까?)

    This add in is very helpful in cases where the gap's are very small.

맨 위로 이동