Refactoring Tool (Trial)

Refactoring Tool (Trial)




This app provides almost the same functions as Design Assistant which is attached to Autodesk® Inventor® and can be operated with Microsoft® Excel® as user interface.


This application analyzes the reference relationship from one specified Target File, and does file operations using the results of the analysis. There are three major functions.

(1) [Change file names]: Filename and/or part number of file will be changed. The references of another file which are referencing to renamed file are also updated if necessary.

(2) [Replace references]: The reference destination will be replaced. If other than ‘0’ is written at [Make file if not exists?] cell on worksheet, the original file will be copied as the reference destination file (if the destination one is not existing).

(3) [Delete lonely files]: Files in the project which don’t have any reference relationship to Target File will be deleted. In many cases, these will have been used in the past but are no longer used at the current assembly. If folder is emptied due to deleting files, the folder will be deleted also.


In addition to the above three major functions, there is the following auxiliary function.

(4) [Migrate Docs]: If document files exist in the reference relationship which are saved on older version of Autodesk® Inventor®, they will be overwritten with current version. This function needs Autodesk Inventor. (This function cannot be executed with Inventor View alone.)

<<Trial version limitations>>
* Version of your Autodesk® Inventor® is <= 2018, number of processing files is limited to 9999 or less. This is virtually the same as unlimited.
* With newer Autodesk® Inventor® than version 2018 which will release in the future, number of processing files is limited to 30 or less.

Hilfe lesen

Informationen zu dieser Version

Version 0.17.1128.0, 29.11.2017
Now one character ‘@’ means null part number. File operations have been speeded up. Some bugs are fixed.

Screenshots und Videos


(3 Bewertungen)


Technische Hilfe erhalten
  • 試作図から規格図への変更が楽にできます。
    Toshiki Domyo | März 19, 2018 Geprüfter Download (Was ist das?)


  • とても助かります。
    結城 秀和 | November 09, 2017 Geprüfter Download (Was ist das?)

    本来、この手の事はAUTO DESK側で 供給されるのが本筋ですね。 少し使用してみましたが、楽にリネームが出来ます。 今まではリンクの問題でIDWを持て余していましたが、 これがあれば、流用設計に大きく貢献してくれます。 同名のファイルが乱立するのが嫌でしたが、 これで、問題が一気に解消しました。 ありがとうございました。

  • 設計者目線の効果的な機能と直感的でシンプルな操作
    明 太田 | November 08, 2017 Geprüfter Download (Was ist das?)

    ファイル名や部品番号の変更といった実設計の場面で頻繁に行われる作業を、Design Assistantの数倍使いやすいインターフェース(Excel)で実現しています。 ファイル名変更の煩わしさや、Design Assistantがイマイチ使い方が分からないと感じていた方には是非おすすめしたいツール。 とりあえずツールを開けば使い方は誰でもすぐに分かります。 また、「孤立ファイルを削除」機能は秀逸。

Nach oben