pointLinker

pointLinker

coolOrange s.r.l.

Digitally signed app

Ingyenes

OPERÁCIÓS RENDSZER:
Nyelv:

Leírás

Autodesk® Inventor® can import point data from an Excel file, but once the data has been imported, the link with the Excel file is not retained. If updates are required to the point data in the Excel file, the data must be manually re-imported and the associated model re-constructed. This is time consuming and inefficient.

 

The pointLinker tool allows Inventor users to import points from an Excel file, retaining a link to that file. Data can be imported (as with the existing command), update from the Excel file, or mapped to another Excel file.

Súgó dokumentáció elolvasása

Verzióinformáció

Verzió 19.0.5, 2019.05.16.
Support for Inventor 2020

Képernyőfelvételek és videók


Ügyfélértékelések

(12 értékelés)

|

Műszaki segítségnyújtás
  • useful
    Hb813 이 | augusztus 07, 2018 Ellenőrzött letöltés (Mit jelent ez?)

    I can handle my points easily from another sources. Nice work.


  • Almost, but not quite
    BRIAN COOP | szeptember 29, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Sure, this allows the creation of points by importing Excel data, but after the import the points are free floating. If you drag them they lose their alignment. After that, it's not easy to fix them because the Excel data hasn't changed. If you lock the points in the sketch to avoid this, then you can't move them by changing the Excel data.


  • Auto-Bend with 3D Line Creation
    Jason Snyder | augusztus 16, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Awesome app, the only down side is it keeps turning on the "Auto-bend with 3D line creation" when I import points to create lines. If there is a way to keep and use whatever is ticked in my application settings it would be 100% perfect. Right now its 99.9%


    Cool Orange (Közzétevő) | november 21, 2017

    The a new version of pointLinker, addresses the “Auto-bend with 3D line creation” issue.


  • Very useful app!
    Alex Dall'Agnol | július 07, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    Easy app, well builted and useful


  • Excel LINK!
    Brent Barbour | június 22, 2017 Ellenőrzött letöltés (Mit jelent ez?)

    A "link" to an Excel table is exactly what I was looking for! This is much better than the "Import Points" command that only imports the points one time without constraints. PointLinker maintains the link to the excel table so if the table were to change, the points will also update. Now Autodesk needs to replace "Import Points" with "PointLinker." Then allow iPart tables to direct different PointLinker tables, perhaps even have all the tables contained in the same multi-sheet Excel file, then you can more easily create a connector iPart with various pin or socket configurations.


  • Very helpful
    Joe Brenner | december 13, 2016 Ellenőrzött letöltés (Mit jelent ez?)

    The App allows users to work in excel (where they are more comfortable) to create lines and splines rather than Inventor equation curves which are more accurate but can be very cumbersome to use for parabolic curves. User can simply add more points in excel to capture level of accuracy needed... It's a game-changer for us.


  • 3DDrawing & Management - Pascal David
    Pascal David | október 09, 2016 Ellenőrzött letöltés (Mit jelent ez?)

    I also do a lot of piping projects, great tool for points, no doubt about that! Keep up the good work.


  • Very Good
    Adrian Ostrowka | április 13, 2016 Ellenőrzött letöltés (Mit jelent ez?)

    This is an excellent app. It has been very helpful.


  • Cool App
    Volkan Ari | augusztus 19, 2015 Ellenőrzött letöltés (Mit jelent ez?)

    A handy tool for linking excel data to Inventor. Thanks a lot.


  • Choix du rayon
    Pierre-Yves Perret | július 10, 2015 Ellenőrzött letöltés (Mit jelent ez?)

    Super application ! Serait-il possible de choisir tout de suite le rayon pour l'import de ligne ? Merci


    Cool Orange (Közzétevő) | július 14, 2015

    Hallo Pierre-Yves, we are not sure whether we understand your question. Please could you contact support@coolOrange.com. Merci Markus


    Pierre-Yves Perret | július 17, 2015

    The radius by default is 5. That would be good to be able to define it from the beginning.


  • XYZ POINTS
    Jason Murdoch | június 30, 2015 Ellenőrzött letöltés (Mit jelent ez?)

    I love the app, great idea ..... but it wont let me update an excel file with XYZ cooardinates


    Cool Orange (Közzétevő) | július 08, 2015

    Hi Jason, with the new build 16.0.31.0 you are able to update XYZ coordinates in a 3D sketch. Markus


    Jason Murdoch | július 08, 2015

    Fantastic, Thanks Markus. 5 stars now


  • Microsoft Excel needed? why?
    Erik Liermann | május 21, 2015 Ellenőrzött letöltés (Mit jelent ez?)

    Since I don't use MS Excel (I use some other tables calculations software) I can't use the app. I recommend the developers make PointLinker work with ASCII files, e.g. CSV tables, that way all of us can use it.

Ugrás a tetejére