OS:
언어:
설명
The Mesh Enabler application converts mesh features to solid base features or surface features. This function can be applied to individual or multi-selected mesh features or mesh feature folders.
After installing Mesh Enabler, right click on one or more imported mesh features of interest, and convert them into Base features (solids, surfaces, or composites) through a new context menu command. The graphical mesh data is converted into B-Rep Model data that can be used similar to imported solids and surfaces.
이 버전 정보
버전 1.0.8, 2018-08-24Support Autodesk® Inventor LT® 2019.
Add a warning dialog when choose mesh feature(s) with more than 5000 triangles to convert.
It is a little finicky, but by doing a solid extrude and then importing a mesh over and then making the mesh a solid, I was able to use the combine feature to make a cut (requires two solids).
Even more amazing, it was a cut from a JPG that I edited a bunch and changed to a PNG, that I converted to a SVG, that I converted to a STL, that I then converted using this tool from a mesh to a solid.
If you aren't getting the option when right clicking, make sure that you are right clicking on the mesh object under the mesh tree. Also, as others have said make sure to enable the add-on. It isn't automatic.
Please fine tune! It is a great addition!
This tool is especially helpful when i need to modify .stl files of 3d printable designs that have no sourcecode available.
very noce
Reading all the Reviews where users couldn't figure out how to use Mesh Enabler - this isn't a Help forum - go over here and ask for help
https://forums.autodesk.com/t5/inventor-forum/bd-p/78
I installed this newer version of mesh Enabler for use with autodesk inventor but I had to revert to an older version. It only converted my .stl files so long as inventor was set to use inches in and the ANSI standard. But the moment i switched over to using mm in the ISO standard, the .stl convertion was unable to produce a solid body output. This review should probably be under a bug reporting site but I cant find that so I hope the Autodesk team finds this here.
Worked on Inventor 2018 after doind this:
Thanks Luis Gaiato! I thought it woudn't work.
Thank You!
Thanks!
THANK YOU!!!!
I used this tool in 2015 and was able to multi-select mesh surfaces to convert (it worked very well). But now in 2017 the ability to multi-select meshes is not available. I can only select 1 mesh at a time, process, then select again etc. I'd give 5 stars if I could multi-select again.
One star in the place of zero stars. Did not work for even a simple mesh conversion.
You should post over in the Inventor forum and include the file. It has worked for me for many years.
Enable it on "Environment > Add-ins> Autodesk Mesh enabler" with a double click. Mark the automatic load box.
Thank you
i just got this and used it on 2018 and it worked a treat. stopped me banging my head against the wall with some imported bearings that i couldnt balloon in an assembly drawing. thanks for a great add on and also thanks to anyone who commented with additional information on setting up and using this. cheers guys
Just tried this with Inventor 2018 and it worked great on an imported .OBJ file (Kohler sink)
It does not work on the 2018 version. Any solution? I thank you
Mesh enabler 1.0.6 only generates surface, will not creare a solid. previous version worked fine.
I used Inventor 2017 on Windows 10 and the newest Version of Mesh but ist Crash.
Same problem for me! Inventor 2017 with Windows 10 and newest MeshEnabler version. Hopefully there's going to be a fix.
Doesnt do what its say it does, spent hours, ends up making something that isnt a solid and you cant print it anyway. Wast of time!
Waiting to see it in the 2018 version. Great work!
- tried to enable in Environment > Add-ins> Autodesk Mesh enabler, but there is only the advise: Fail to load Uninstalled, booted, installed ... same problem. I dont know why.
When it converts the .stl to part, the size changes (it grows a little bit). I wonder, have anybody else experience this? Does anybody know how to correct this issue? Thanks!
If it outputs as a solid, go to 3D Model > Modify > Direct > Scale and scale it down to the size you need. I had the same problem and it took me a while to get it corrected.
Good god this addin really is a must have for work with shape generation. Can't believe it isn't standard with inventor
Iv'e downloaded the application. Enabled add-ins on 2017 Inventor, but the option "Convert to Base Feature" never shows up.
You need to enable first. Environment > Add-ins> Autodesk Mesh enabler (double click then Ok).
I can convert and edit all my files (*.stl to *.ipt) Really helpful, thanks.
Good day Miguel any idea if mesh enabler can work with Autodesk 2014 im still old school lol
@Phillip, Not sure, I used it with Autodesk 2017 Student Edition. Sorry, but you should try it.
Works great with Inventor Prof 2015
I used this with Inventor 2017, it took 5-10 min to convert the part, however i am only running this on a laptop. Thanks
Demorei para conseguir baixar, mais no final deu certo. Tive que baixar o inventor que eu não tinha e logo apareceu a aba de Download.
Works
thank
Buongiorno, ho a disposizione inventor 2016 per studenti in italiano. Ho cliccato su installa, è andata a buon fine ma non riesco a trovare quel nuovo menù. Cosa posso fare?
Avevo lo stesso problema e ho risolto in questo modo: > Dal menù aprire la sezione "Environments" > Sotto il gruppo "Manage" slezionare "Add-Ins" (come simbolo ha un "più" grigio) > dalla finestra che si apre, sotto la scheda "Applications" selezionare dall'elenco "Autodesk Mesh Enabler" e porre la spunta sulle voci "Loaded/Unloaded" e "Load Automatically" > premere "Ok"
I use this tool to import .stl-files from thingiverse, in Inventor. I can convert to solids and edit the designs. Just don't forget to set the load behavior in the Add-in Manager, on "Load Automatically" .
Hi! This article is very informative, but I'd you help me with a thing. I imported a stl. file in Inventor 2016 and I applied the app to convert a Base Feature, and I want to convert it in a solid, but what I got was a surface, I mean "the solid" created is empty. Also, I cannot calculate the properties (mass, volume...) and the software doesn't allow me to do any operation. Inventor doesn't recognize it as a solid. I wish you could help me with this.
Can't get it to work. Restarted application, stl loads, but no conversion to solid.
You need to change the load behaviour in the Add-in Manager, this is accessed through the 'Tools' tab & then the '+ Add-Ins' Icon. If you tick 'Load Automatically' (bottom right hand corner) it should activate the add on every time you start inventor.
no puedo descargarlo alguien que me ayude tengo una cuenta de estudiante !
A mí me funcionó y tengo cuenta de estudiante. Tienes que acceder con tu cuenta de estudiante para que se te habilite el botón para descargar (pero si pudiste descargarlo, supongo que ya accediste, así que solo tienes que buscar el botón para descargar).
Downloaded 3D DXF from manufacturers website Opened DXF in Inventor: Locks up Opened DXF in Rhino 5: OK Saved as STL and 3ds-file with Rhino 5 Imported STL in Inventor: OK, I see the mesh, but it's no solid. Applying Mesh Enabler on imported STL/Saved as IPT: Locks up Imported 3dm in Inventor: Result is an 'empty' modelfile Downloaded 3D DXF again from manufacturers website and gone trough the whole process again: No change I have no 'mesh knowledge' Please, what now? I need the solid. Mesh Enabler was THE promise. Thx and best regards
I suddenly had a problem with this add-in and just had to re-inable it on the tool menu. It works great as long as you have it running.
I suddenly had a problem with this add-in and just had to re-inable it on the tool menu. It works great as long as you have it running.
.... well it is, but the addin isn't loaded correctly. You have to go to Tools>Addins then find it in the list, then enable it.
Install the add-in on a working student edition of inventor 2016, but after installing add-in inventor crashes either during splash screen or after splash screen but before home page opens. Inventor stalls out (doesn't shut down.) Requires force-quitting After waiting long enough it does seem to get past the splash screen, but it still stalls for ages at the home screen (open recently used files screen.)
same problem here. inventor 2016 pro windows 8.1.1 64bit
It works well. I used it with 3DPrintTech 2.0 (also free) to split/partition and snap fit large STL on smaller printers. Easy-peasy.
I haven't download the program yet, but I wonder about that which version of inventor does it work with? I will load inventor hsm pro v2016, any problem?
The installation seems to work but once I am in Inventor Pro 2013 and 2016 the option "convert to base feature" is missing when right clicking on my object. If I go to Tools / Exchange app manager I can see Mesh enabler 1.0.4 listed in there with a green check mark saying its up to date. So it seems to be loading but the menu entry is not there. How do I fix this?
Hey, i had the same issue. I fixed it by going to Tools and clicking on Add-Ins. I noticed that mesh enabler wasnt being loaded for my model, so i selected it and checked the boxes. Hope this works for you!
Thanks Jack Caldwell...that solved the problem for me too!
Thanks Jack, that did the trick on my installation as well
Even though I am a valid Subscription Customer I am not able to download this App. Can somebody help?? I need the app really really urgently.
same here :(
Me as well what gives?
Same problem here. Signed in and "Subscription App"
I too am unable to see the the download despite being on Subscription. As luck would have in I need this urgently to create a Shrinkwrapped part of some Catia files which at the moment are only meshes.
Every time I've tried to use Mesh Enabler for a part that really isn't that big, the program crashes. I keep seeing that the bug has been fixed but I'm still having this problem.
Hi Stan, Does the crash happen to Inventor 2015 RTM? Which Mesh Enabler version you installed?
I'm using Inventor 2016 Pro on 8.1 64bit with the newest Mesh Enabler and have the same problem. It fills up all 8gb of ram but only uses about 30% of my i5 2.5 ghz. Thereby it kills every other program, of course, but even after an hour and a half of doing its thing, no response, no result. I notice another Inventor window that's just the inventor Icon open in the task bar called AdInventorButton or somesuch. It too does not respond.
Great job!
I can't seem to get the download link to appear. I am signed in and i click the subscription app button but nothing happens besides more dialogue. Would really like to use this app.
I have same issue as you guys, no download link. I'd love to be able to use this feature.
how to get the subscription account?
To become a subscriber, please contact your reseller to help you. You can also find some info from below pages: http://www.autodesk.com/subscription/overview http://knowledge.autodesk.com/customer-service/account-management/account-access/autodesk-account/signing-autodesk-account .
I can't find it either. I'm signed in, but this download isn't an option
I am in the same boat. I have logged in, gone to subscription page, and no download. Has anyone figured this out? What a cool tool that addresses a need in my class...wish I could utilize it.
Where is the link? I click Subscription App but it doesn't let me download. I logged in to the Education Community and Autodesk Subscription Center there is no link neither.
Hey Eric, I was having the same problem and customer support was no help. I think their license server was down for a bit for educational licensing because now I can download it.
I am having the same issue as you. Can't find the link.
Thanks a lot. We are able to convert a stl object to a surface during a demo with our customer.
This is exactly what I've been needing! Saved me a few times, and couldn't be simpler! The only thing I guess I could ask for would be tools to automatically reduce the mesh size within the tool - but there are plenty of other programs for that (try Meshmixer!)
This works very well! The only problem is that I cannot figure out how to import designs that were exported as mm. They import as inches and show up very large.
You may have solved this already but just in case: When you are importing the model you can click on options and a window will appear. Here you can select the units, by default they should be set to "Template Units" and here you could change it to whatever unit you need.
I've installed the addin, and I'm attempting to do a mesh convert from the file as an .IPT, and after accepting the operation, it just seems to hang. I mean I cannot do a single thing after starting it. A few mouse clicks later, and the 'busy wheel' appears, and Inventor 2015 SP1 is no longer responding.
I am having the same problem for bigger .stl files i want to convert. Smaller are converted fine. I have waited for hours but nothing happens. Is there a solution besides waiting? EDIT: It's done, after a few hours and filling my RAM up to 25GB.
I have the Autodesk student version of inventor. How can I download and install this?
log in with your student autodesk ID. click on download.
I tried to convert a .stl file and it crashes Inventor 2015. I have changed the star rating from an original 2 stars to 4 stars now. Rocky fixed the issue and it seems to work fine now. Thanks Rocky.
If you are using Inventor 2015 SP1 you can encounter the crash, for RTM it should not. I am fixing this issue and will publish the newer version. Thanks for your feedback.
Thank you Rocky for looking into it. I am using 2015 SP1 so I look forward to the new version when it is available.
2015 Froze for me but the base feature seems to have been created. Looking forward to the fix.
A new version is published for fixing the crash issue, please check it.
Seems to work fine now after Rocky fixed it up. Thanks Rocky! This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: Make sure you know what your units are of the .stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. I opened a customer model and it looked correct until I made a measurement and it was 12" the real measurement was 0.473 or 12mm. The customer exported in mm and I imported in inch. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the .stl came in fine and matched what the customer had. Once the .stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.
Jeremy, I am having the same problem with it importing in inches when it should be in mm. How did you change the option to import in mm?
Evan, What I did is when you go to open your .stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally. That should do it. Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. Hope this helps.
Great job! Thanks Rocky!
A new version is published for fixing the crash issue, please check it.
When it works, works good. Can run the same file twice in a row. One time converts meshes, next it won't.
Works fine here. Just Netfabb the STL and it works.
its nice . . .
merci
lo quiero probar para mi diseño