coolOrange threadModeler

coolOrange threadModeler

coolOrange s.r.l.

Digitally signed app

Бесплатное

ОС:
Язык:

Описание

The threadModeler tool has been developed to allow  Autodesk® Inventor®  users to generate a realistic modeled equivalent thread based on an existing Inventor thread feature. Users are able to select an existing thread feature in the model, which the threadModeler then converts to a realistic 3D modeled thread based on the underlying thread feature properties.

 

Modeled threads are accurately generated saving a lot of time and effort for the user when compared with a manual approach, bringing a higher degree of realism to your models.

 

Please watch this short video for an overview of the threadModeler.

Прочитать справку

Сведения об этой версии

Версия 18.0.05, 09.05.2017
Support of Inventor 2018

Скриншоты и видео


Рецензии клиентов

(130 оценки)

|

Техническая поддержка
  • WOW! Works Great
    Dan Murphy | августа 17, 2017 Проверенная загрузка (Что это такое?)

    Click on the tool. Click on the tread file and boom! Saved me a lot of time instead of doing it manually.


  • 3d Printing
    Iain Mcmurray | августа 16, 2017 Проверенная загрузка (Что это такое?)

    Amazing and simple to use. Perfect for setting up my models for 3d Printing when I need threads.


  • Perfect!!!
    Johann Hepp | августа 10, 2017 Проверенная загрузка (Что это такое?)

    Works better than expected. Relieve the work. Thank you!


  • Great tool
    Brad Headlam | августа 08, 2017 Проверенная загрузка (Что это такое?)

    Time saver if you need to fully model the thread. Only downside is creates large file size, but still great.


  • Works good, a few issues
    Frank Okipnak | августа 04, 2017 Проверенная загрузка (Что это такое?)

    As everyone else is saying, great for the most part, just needs to be refined so can do more thread styles as well as holes properly. Otherwise, very handy and cool. The error I get the most is "Failed, try with a bigger pitch offset value", no matter what I try, does not work.


  • Super
    Sule Wad | августа 01, 2017 Проверенная загрузка (Что это такое?)

    A great Tool


  • Hoze
    Jozsef Sallai | июля 29, 2017 Проверенная загрузка (Что это такое?)

    Hi there, As others have already thanked I also want to do: Thank you guys!


  • easy app to use
    Julian Shepherd | июля 13, 2017 Проверенная загрузка (Что это такое?)

    really easy to use great results .


  • Works good
    Ben Vinck | июня 26, 2017 Проверенная загрузка (Что это такое?)

    It does what's supposeed to do. Nothing more. Nothing less.


  • Excelente!
    Luis Carlos Vega Renteria | июня 25, 2017 Проверенная загрузка (Что это такое?)

    Muy buena aplicacion! Yo te sugiero que hagas un pequeño tutorial de como hacer roscas para NPT ya que creo que nadie sabe como hacerlo. Gracias


  • good
    谢 凡 | июня 12, 2017 Проверенная загрузка (Что это такое?)

    it works very good,especially for 3D print.Thank you!


  • Straightforward and Effective
    Jonathan Bazak | июня 09, 2017 Проверенная загрузка (Что это такое?)

    Does exactly what I needed it to do: make matching 3d-printable threads on holes and surfaces with just a handful of clicks. Support for more non-standard ISO metric threads would be cool, but there are plenty here as-is. Very handy extension to have!


  • good
    Waiman Liu | июня 06, 2017 Проверенная загрузка (Что это такое?)

    very good. i can 3d print many gears now !!


  • Absolutely amazing
    Giacomo Brugnolo | мая 24, 2017 Проверенная загрузка (Что это такое?)

    Very useful for 3d printing and making your components look absolutely better!


  • Awesome
    Ricardo Fernandez Saavedra | мая 15, 2017 Проверенная загрузка (Что это такое?)

    Works perfectly! Thank you!


  • Can't be used with .idw callouts
    Douglas Reiland | мая 14, 2017 Проверенная загрузка (Что это такое?)

    The downloading and aesthetics of threadModeler are fine, but, unfortunately, this application is not compatible with .idw drawings. Inventor does not recognize the threadModeler modifications to the .ipt, therefore they cannot be called out with hole/thread specifications on drawings. I submitted this to coolOrange tech support. They acknowledged that this was a problem and acted as though this was the first time anyone raised this issue with them.


  • VERSION
    Daniel Gamarra | апреля 30, 2017 Проверенная загрузка (Что это такое?)

    I downloaded the plugin. The installation was successful but i can't see the app in the ribbon. Is it working in version 2018??


    Cool Orange (Разработчик) | мая 03, 2017

    Hallo Daniel, we are currently working on the version for Inventor 2018. We are planning to release it until May 12. Best regards Markus


  • Worked perfect so far
    Simon Roth | апреля 27, 2017 Проверенная загрузка (Что это такое?)

    Had no problems with it, created perfect threads for 3d printing. Thank you


  • Very Useful
    Jordan Coquoz | апреля 18, 2017 Проверенная загрузка (Что это такое?)

    I don"t normally rate things but I wanted to give this five stars because of how amazingly useful this is. Huge thanks to the developers of this tool.


  • Cool so far
    Engineer Draft | апреля 12, 2017 Проверенная загрузка (Что это такое?)

    Have used it once where I wanted to really expose thread on a drawing, so that immediate clarification would happen. Worked well and was happy, good in context of time saving for those one off type jobs.


  • Works well for me
    Jonathan Colella | апреля 10, 2017 Проверенная загрузка (Что это такое?)

    No hassle, as advertised


  • Great app needs a few tweeks
    ROGER HOOKER | марта 29, 2017 Проверенная загрузка (Что это такое?)

    it's very responsive, however it's difficult to champher and seemingly impossible to extrude through.


    Albert Eurich | июня 20, 2017

    When using the thread modeler you create a second volume (thread). Now turning or extruding on that element you need to click on "select volume" and then select the thread itself to add it to the process. Was also wondering in the beginning :)


  • Awesome
    Michel Varjao | марта 08, 2017 Проверенная загрузка (Что это такое?)

    Very good tool. It saves a lot of time =)


  • Thanks
    Mogdy Mogdy | марта 02, 2017 Проверенная загрузка (Что это такое?)

    i love it and more important use it, thanks a lot


  • Great!!!
    Atanas Dimitrov | февраля 17, 2017 Проверенная загрузка (Что это такое?)

    It is great and works good!


  • Good | Bien
    Salvador Simón | февраля 15, 2017 Проверенная загрузка (Что это такое?)

    It's useful, thank you. | Es útil, gracias.


  • Worked perfectly
    Nick Pound | февраля 13, 2017 Проверенная загрузка (Что это такое?)

    Easy to use and the thread came out perfectly on the 3D model


  • very cool thankyou
    Robert Barrett | января 28, 2017 Проверенная загрузка (Что это такое?)

    massive time saver I 3d printed a 10 mm nut and screw on our fortus 450 and as far as I can see its perfect . Robb


  • Must have app
    Michael Hanimann | января 27, 2017 Проверенная загрузка (Что это такое?)

    Realy important app if solids for 3d-print should generated.


  • Time Saver
    Jason Wells | января 17, 2017 Проверенная загрузка (Что это такое?)

    Very useful tool. Adds to the wow factor when showing off your work and for rendering. Works great for 3D printing. To get the chamfer, you need to edit the sketch of the second revolution. Remove the corner where you want the chamfer to be. Great add-on!


  • Excellent App
    John Hackney | января 14, 2017 Проверенная загрузка (Что это такое?)

    This application will save you tremendous time if you need fully modeled threads in your model. If you do rapid prototyping of threaded parts, it is a life saver.


  • OK
    Tomas Popelka | января 12, 2017 Проверенная загрузка (Что это такое?)

    good tool for real thread


  • Excellent, where applicable
    Ulrich Bahners | января 11, 2017 Проверенная загрузка (Что это такое?)

    Download: was simple. Installation into IV2017: was easy. Be sure to enable Auto-load and disable blocking! First use: is intuitively easy. Limitations from my p.o.v.: 1. Do use where applicable: only when thread gear display is needed. 2. It´s a makro, not an Inventor Feature => no thread info on drawing with the (dynamic) thread note command, and no subsequent change of thread Features. My Résumé: Great tool, I am a fan, thank your very much coolOrange!


  • Great app
    Kaan Demirtas | декабря 12, 2016 Проверенная загрузка (Что это такое?)

    Works fine and enough for my needs. Real threads are a sometimes a fine details sometimes a necessity. Works as both for me. Thanks and keep up the good work!


  • Works well few small issues but overall pretty good
    Phil Brodie | декабря 12, 2016 Проверенная загрузка (Что это такое?)

    Great tool looks good and works well only really used to create standard metric threads so far with good results did encounter a problem with chamfering the bolt edge though to finish did not work to well with the leading edge of the thread when mating up to hole also could not lose the opening dialogue box after using a glitch that I had a bit annoying having that on the screen all the time. That said it was impressive in showing a proper cut thread although the file size increases dramatically so it would not be good for a large assembly model with lots of bolts in it.


    Jason Wells | января 24, 2017

    If you edit the sketch of the second revolution, chamfer the corner where you want it to be. finish sketch and it should work. Since the sketch is not constrained, fixing a couple of the lines will keep you from accidentally moving one and jacking stuff up.


    Phil Brodie | января 30, 2017

    Thanks Jason


  • Nice app.
    Danny Pinxten | декабря 05, 2016 Проверенная загрузка (Что это такое?)

    It is verry cool, one problem I have, I can't cut trough the tread anymore to make a section view in the 3D modus. I need it to print some stuf to teach.


  • Works great
    Ch'Ng Zai Kai | декабря 01, 2016 Проверенная загрузка (Что это такое?)

    Cool threat modeler. solve my problems in sec.


  • Super einfach!
    Torsten Kass | ноября 29, 2016 Проверенная загрузка (Что это такое?)

    Dieses Plugin macht das Leben sehr viel einfacher. Danke!


  • Works OK
    Darren Sheridan | ноября 29, 2016 Проверенная загрузка (Что это такое?)

    The representation over the standard inventor thread is just what i wanted, however i would agree biggest problem was hole / thread note does not see the thread! Still nice to have.


  • Awesome
    john assmundsson | ноября 27, 2016 Проверенная загрузка (Что это такое?)

    Saves a headache


  • Petr
    Petr Svorba | ноября 23, 2016 Проверенная загрузка (Что это такое?)

    Šikovný pomocník. Uvátali bychom i pro lichoběžníkový ( trápézový) závit.


  • Great Add In
    Chieu Do | ноября 08, 2016 Проверенная загрузка (Что это такое?)

    Perfect! Makes life so much easier. Thanks!


  • NPT Threads
    David Gonsior | октября 13, 2016 Проверенная загрузка (Что это такое?)

    Cannot seem to model NPT threads...


  • Easy to use
    Dan Potter | октября 12, 2016 Проверенная загрузка (Что это такое?)

    Works really easy, does a fine job. Needs one more feature, it needs to allow for a chamfer to be added. I added this app for making catalog pages, great addition.


  • Its good app
    Maciej Gniadek | октября 06, 2016 Проверенная загрузка (Что это такое?)

    Its good app


  • Great Add in, but....
    Effendy Zakaria | октября 01, 2016 Проверенная загрузка (Что это такое?)

    It works great, but got a problem when there's chamfer


  • The best and easiest way to model threads!
    Dalton Blevins | сентября 06, 2016 Проверенная загрузка (Что это такое?)

    I have been using some variation of this add-in for a couple of years. It has always been a huge tool in my modeling. Thanks for the continued support and development!


  • Ok
    Oleksandr Ovdii | августа 18, 2016 Проверенная загрузка (Что это такое?)

    Must have.


  • Need to use for NPT thread
    Michael Pierides | августа 15, 2016 Проверенная загрузка (Что это такое?)

    Has anyone been able to make NPT tapered threads using the thread Modeler? The changelog for the app shows NPT support, but no NPT template exists. Is one of the other templates okay to use?


    Dalton Blevins | сентября 06, 2016

    Yes, it will model NPT tapered threads. First of all, make sure that your part is drawn with the taper and correct dimensions. Then you use the tool like normal. (Thread the part or hole with the Inventor thread feature, then use the coolOrange add-in to model the threads.)


  • silvio
    silvio ross | августа 13, 2016 Проверенная загрузка (Что это такое?)

    super thx


  • Awesome addin!!!!
    Bryan Daniels | июля 22, 2016 Проверенная загрузка (Что это такое?)

    I just added this back in after upgrading my inventor. I love this and it is such a time saver!


  • Realworld Application works
    Dan Kennedy | июля 06, 2016 Проверенная загрузка (Что это такое?)

    Was having trouble with a model that had threads manually created by a designer. Redid the model with this and the 3-D printers made it happen. Even the machinists can work with this, especially as the output file can be extremely detailed. THIS is an example of what it means to be in a world with talented people who use their skills to help one another so we're not dependent on the thousands of dollars of help from some designer or engineer who's not even doing the work and/or cheating with some application themselves. I wish coolOrange could do a whole lot more - because this makes Autodesk usable for realworld applications and design and makes it usable by even dummies like myself! I found a Youtube video on this and that's how I was turned on to it. I'm sure there are some nuances that could improve the program and I hope coolOrange does improve it because this is awesome! Don't let Autocad buy you out and make it unreasonable in cost for all of us :)


  • Works good
    David Rychlý | июля 04, 2016 Проверенная загрузка (Что это такое?)

    Works very good, should be default feature in Inventor!


  • That's great!
    Smile Five | июня 11, 2016 Проверенная загрузка (Что это такое?)

    That's great


  • GREAT technical support
    Marcus Wolsey | июня 07, 2016 Проверенная загрузка (Что это такое?)

    Having updated to Inventor 2017 was not able to see or use Thread Modeler. Contacted their technical support they quickly put me right and now it works. Product itself is a great time saver and it was FREE.


  • Works, but then causes problems
    Timothy Molitor | июня 02, 2016 Проверенная загрузка (Что это такое?)

    It worked great and made a good thread but then I could not extrude (cut) any part of the new thread.


  • Works great, except when you want to close it
    Quirijn Verbij | мая 27, 2016 Проверенная загрузка (Что это такое?)

    The thread modeler works great, but when you want to cancel your action then there comes an error, there is no other way to close the program, only closes when you exit Inventor


  • BFS & BSP
    Paul Mason | мая 18, 2016 Проверенная загрузка (Что это такое?)

    I work a lot with some very old machines and steam Loco, mainly in museums, however all are in full running/working order. My question is will we imperial, inch, sized British Standard Fine and British Standard Pipe an British Allied, thread modelling. It would make my job a lot easier


  • GREAT TOOL!
    William Woehlke | апреля 27, 2016 Проверенная загрузка (Что это такое?)

    I have been trying to find a good thread modeler for a while now, the one that was advertised on Autodesk Labs has been taken down for a while and I came across this one and was willing to give it a shot. It works great! I've used it on internal and external threads, and yes, it does take a little playing around with to get chamfers where you want them, but I've found that just leaving them out sometimes allows the modeler to create a nice finish on its own too. Also, it does leave the threads pretty tight, but that's not hard to adjust and it's because, like most Inventor features, they are hard locked onto the numbers. Anyone machining a part will understand there's a tolerance to be allowed for and can compensate. One other note, the Combine tool will fix the "2 solid body" issue I've seen some others bring up. It is a very efficient finishing operation to blend the modeled thread into the rest of your part as one solid body. Great Job coolOrange and Thanks a million for the Add-In!


  • Works but not on holes
    Fredrik Hansson | апреля 27, 2016 Проверенная загрузка (Что это такое?)

    It works but not on holes created with hole wizard. This is something Autodesk need to implement in the thread-feature instead.


    Maha Nadarasa | августа 21, 2016

    Yes, I encountered the same problem.


  • Thread modeller
    Timothy Moore | марта 29, 2016 Проверенная загрузка (Что это такое?)

    FIRST CLASS such an easy way to achieve proper threads, allowing thread faces to be picked to produce an animated joint easily. Thank you Orange. Tim


  • Works OK, but...
    mike lake | марта 23, 2016 Проверенная загрузка (Что это такое?)

    A few things to be aware of: • It must be an Inventor “thread” feature to work. The “hole” feature with threads generated from within the “hole” dialog box does not work. • Holes into which you will put ID threads must first be modeled at the thread major diameter. Coolorange picks up the pitch info from the Inventor thread, but assumes the diameter of the hole is a major thread diameter. If you modeled the hole at thread minor diameter (as would be normal), it will generate small threads and still think they are the correct size… • The “thread” feature must be accurate with regard to length, etc – coolorange will create the length of it's revolution and coil based on the thread feature parameters, and create a cool Helicoil looking piece of geometry that goes out into space even if there is no supporting cylindrical geometry for it. • Threads that intersect chamfers or radiuses do not work. Coolorange generated threads have flat, perpendicular ends – period. Some trimming may be required. • The coolorange geometry is not parametric with the Inventor thread feature that supplied the data. Go back and edit your thread feature, and the coolorange thread form doesn’t care. • It makes the .ipt file sizes huge. • If you want to 3D print these threads and actually have the fit together and work, you will have to "fudge" your thread fit by moving the major diameters around by .005" or so (depends on your printer) to create clearance at the pitch diameter. You may also have to manually edit the coolOrange revolution and coil to make sure the coil is longer than the revolution to get a good thread lead-in on the end. In summary, it is faster than modeling your own thread forms, but not without it's issues...


    Phil Brodie | января 30, 2017

    I never had issues as long as I created the hole diameter myself and added from the thread modeling tool


  • Good working
    Wojciech Baran | марта 02, 2016 Проверенная загрузка (Что это такое?)

    It iw very useful tools, especiially that it is for free :)


  • Simple and easy to use
    Alvin Russell | февраля 29, 2016 Проверенная загрузка (Что это такое?)

    Installed with no issues. Simple easy to follow instructions. Nice feature if you want that final bit of realism in your part.


  • Excellent !!! Can't run with Parameters.
    Shailesh Patel | февраля 24, 2016 Проверенная загрузка (Что это такое?)

    Easy, Quick and Excellent !!! Wondering, if could modify Thread size and Length by changing parameters. Still, it's too quick to remake.


  • Showcase Issues
    Heiko Sauther | февраля 13, 2016 Проверенная загрузка (Что это такое?)

    When i got a Hole and a Thread - this tool shows it perfect in Showcase. When i put it on a outside Diameter - Showcase is for whatever reason not able to handle it and just shows a "Layer"


  • Works and Looks Great....Needs 1 Update
    Scott Cerra | февраля 10, 2016 Проверенная загрузка (Что это такое?)

    Threads look very good, Main problem is you can't use the Hole / Thread note in the IDW. Fix that and 5 starts .


  • Works fine.
    Jan Bakker | февраля 04, 2016 Проверенная загрузка (Что это такое?)

    -


    Layke Martin | февраля 12, 2016

    Be sure to click the thread in the view menu. Your not able to click the actual thread, you have to select the feature. Hope this helped


  • Very useful
    Uğur Semiz | января 26, 2016 Проверенная загрузка (Что это такое?)

    Helped me to save huge time, thank you for such an addition.


  • coolOrange thread modeler
    Chris Beglin | января 23, 2016 Проверенная загрузка (Что это такое?)

    Excellent result. Does make quite a large file but still - does a superb job.


  • great product
    William Knox | января 21, 2016 Проверенная загрузка (Что это такое?)

    Works great when adding threads to our custom parts. However, when I attempt to add a Key (whether before of after) it will not extrude cut through the threads. Any suggestions?


    Tony Van Avermaete | апреля 21, 2016

    William, thread modeler will create a revolution for the thread feature it creates. It creates that revolution as a new solid, what you need to do to perform cuts or extrusions on the new threads is go back and edit the revolution and select the join operation. It will through an error on the coil feature. Accept the error, then double click on the coil feature, and click okay on the coil feature dialogue. Everything should build successfully and you should be able to perform your cuts.


  • Perfecto
    Hugo Martin | января 14, 2016 Проверенная загрузка (Что это такое?)

    Trabaja muy bien, versión estuudiante 2014


  • Works fine
    Ap Tano | декабря 28, 2015 Проверенная загрузка (Что это такое?)

    It save you a lot of drawing time


  • Works great in Inventor 2016
    Deniese Powell | декабря 09, 2015 Проверенная загрузка (Что это такое?)

    I had no problem downloading the program and it does beautiful threads. I found if I put the chamfer in first then the picture of threads, when I convert with thread modeler the chamfer stays put. Easy to use. Hope you can update this program to include NPT threads someday


  • Works Great 2016
    Douglas Cook | декабря 07, 2015 Проверенная загрузка (Что это такое?)

    I think it works great, although it takes chamfers out. You can put a revolve cut for the chamfer, but it is a little tricky. You have to select the threads twice if I remember correctly, the major (outside of thread) and minor (inside of thread) to get that to work. Other than that the thread looks great.


  • Won't work with Inventor 2016
    Christian Kindrat | декабря 02, 2015 Проверенная загрузка (Что это такое?)

    Please Fix.


    Douglas Cook | декабря 07, 2015

    I got mine to work with 2016, you must select the part from the tree.


    Hans Seher | января 04, 2016

    Its Work perfectly, testet on Inventor HSM Pro 2016 internal also external 1A+


  • Can't get it to work
    Michael Norton | ноября 30, 2015 Проверенная загрузка (Что это такое?)

    Installed with Inventor Pro 2016 on Windows 7 64-bit, could not get it to work on internal threads. Haven't tried external.


    Christian Kindrat | декабря 02, 2015

    Same


    Hans Seher | января 04, 2016

    Its Work perfectly, testet on Inventor HSM Pro 2016 internal also external 1A+


  • very good
    Andrew Smith | ноября 23, 2015 Проверенная загрузка (Что это такое?)

    Super bit of software


  • Made my life a whole lot easer
    Chimmy Chang | ноября 15, 2015 Проверенная загрузка (Что это такое?)

    I'm mainly using this for 3D printing, so when I found out that Inventor only uses an image for the threading, I was pretty disappointed. Luckily, this plugin saved me a ton of work in manually creating threading. It works pretty fantastic. Unfortunately, when 3D printing with PLA or ABS, the threading fit is really, really snug. This is great for manufactured parts, but isn't great for 3D printing due to the tolerances. It would be great if there was a way to add a little bit of wiggle room. If anybody knows how to do this, please let me know, otherwise it might make a great new feature.


    Tjzerr Tjzerr | января 09, 2016

    Agreed....


    Tony Van Avermaete | апреля 21, 2016

    Chimmy, To add some wiggle room, just make your initial hole size a fraction larger before adding inventor thread feature to your hole. Then add the thread feature, then use thread modeler and it will use the larger hole size you created.


  • Simple to use tool
    Heinrich Kleeberger | ноября 04, 2015 Проверенная загрузка (Что это такое?)

    Simple to use and does, what it should.


  • I Have One Word For This
    John Hyslop | ноября 01, 2015 Проверенная загрузка (Что это такое?)

    Excellent


  • GREAT
    Claude Boudreau | октября 31, 2015 Проверенная загрузка (Что это такое?)

    I think that ACME thread is missing, but this it's a really great app.


  • problem with installations
    Segundo Escobar Jr. | октября 28, 2015 Проверенная загрузка (Что это такое?)

    i've tried to install the apps and it was not responding to my windows 8.1 laptop. is there anyone can lend their hand on me??


  • Perfect
    Jos Houweling | октября 28, 2015 Проверенная загрузка (Что это такое?)

    Only for 3D Printing


  • Almost but not quite
    Ian Mengel | октября 08, 2015 Проверенная загрузка (Что это такое?)

    Great app for showing realistic threads quickly and easily, needs improvement for those amongst us who would like to use it for rapid prototypes, especially internal threads.


    Segundo Escobar Jr. | октября 28, 2015

    i have a problem in installing this apps...is there anything you could advise?


    Ian Mengel | ноября 30, 2015

    Hi Segundo, I noticed in your earlier post you are using Windows 8.1, I'm not familiar with this version as we are using Windows 7, I suggest you contact CoolOrange maybe they haven't released an 8.1 version yet?


  • Great for Simple Threads for 3d Printer Models
    marcnaz marcnaz | октября 07, 2015 Проверенная загрузка (Что это такое?)

    If you've ever labored to create specific threads etc for a 3d printer project, you'll really appreciate this app. Even simple threads can be a hassle and a bit time consuming in Autocad and this makes the process very simple.Thanks for creating and sharing!


  • Helps a lot
    Andres Koha | октября 05, 2015 Проверенная загрузка (Что это такое?)

    Still missing recognition of chamfered ends.


  • Amazing threads
    Joseph Haigh | октября 03, 2015 Проверенная загрузка (Что это такое?)

    Simple to use and very good threads that come out just like you would want them to.


  • Screwy Stuff
    Bill Martinez | октября 01, 2015 Проверенная загрузка (Что это такое?)

    This application works great, however, I wish it would do the same for pipe threads.


  • does not work
    Timothy Ward | сентября 24, 2015 Проверенная загрузка (Что это такое?)

    Tried running this in Inventor 2015, didn't work. Upgraded to 2016 this morning still will not work. would give it 0 out of 5 if I could


  • 5 Stars for Sure
    Scott Freer | сентября 21, 2015 Проверенная загрузка (Что это такое?)

    Very Impressive !!!


  • OK. very very Good. I Like it.
    Vittaphon Krittalucktharee | сентября 18, 2015 Проверенная загрузка (Что это такое?)

    Generates real threads great. Didn't explore many options past common metric threads. However, STL files export hollow. Couldn't force a solid fill. I'm better off manually generating threads.


  • Threadmodeler
    Nick Meyer | сентября 11, 2015

    I was dissapointed when I could not get a thread displayed in my drawing file and to go and model a fisical thread was not for me. Than I dicovered on the net the threadmodeler, what a pleasure to use it, it works perfect for ID and OD threads. Thanks you saved my life. .


  • great tool
    Pascal David | сентября 09, 2015 Проверенная загрузка (Что это такое?)

    Great tool and gives this extra touch on your modeling. Awsome app guys !


  • Still needs work
    Chris Breidenbaugh | сентября 03, 2015 Проверенная загрузка (Что это такое?)

    After only using threadmodeler a few weeks this is what I have experienced: I have not been able to get an internal thread on any of the models I have. On a small part (1-1/2" OAL) with 5/16-18 thread approx 1/4" long, threadmodeler applied it's thread to the entire length of the part. Most external threads I applied though turned out fine. I will still use the product, but just with the knowledge that there are some threads it can't handle.


    Cool Orange (Разработчик) | сентября 04, 2015

    It looks like you generated the thread with the hole feature of Inventor. In this case no thread feature is created in the Inventor browser. But you need to select the thread in the Inventor browser. If you create the hole and then add the thread sketch with the Inventor thread command, you will be able to use this thread for the threadModeler.


  • Works great on male threads, isn't good for female threads
    Jonathan Irving | августа 17, 2015 Проверенная загрузка (Что это такое?)

    It works fantastic for male threads and as with any tool, if you think about how to use it there's no issue on male threads. Unfortunately for female threads it takes the major diameter of the modeled thread as the minor diameter of the female thread form leaving you with a drastically undersized unusable female thread for 3D printing.


    Cool Orange (Разработчик) | сентября 04, 2015

    The hole that is used for the threadModeler must have the naminal diameter. So for a hole M10 the diameter must be 10 mm. If you are using the smaller bore diameter the thread will be undersized.


  • good app
    Arturo Compean | августа 17, 2015 Проверенная загрузка (Что это такое?)

    saves lot of work


  • Does what it claims, and does it well.
    Bryan Taylor | августа 13, 2015 Проверенная загрузка (Что это такое?)

    I have only used threadModeler briefly, but so far it has performed quite well. I question the separate solid created, but so far that has not caused any issues for me.


  • Well done, quality support
    Brannon Small | июля 31, 2015 Проверенная загрузка (Что это такое?)

    This is a great tool for modeling threads on connectors. The application creates all the necessary sketches and commands for you. If you should decide that you don't want to use the threads created, it is as simple as deleting the created sketches and features. If you contact them with any questions, they will respond and give you an answer.


  • Muito bom ess plugin.
    Francisco Lopes | июля 29, 2015 Проверенная загрузка (Что это такое?)

    Muito pratico e economiza muito tempo de modelagem.Muito obrigado


  • thank you so much
    Will Clarke | июля 28, 2015 Проверенная загрузка (Что это такое?)

    Not only is this plugin amazing..the publisher took the time to promptly reply to my question. I'm delighted with it.


  • Best in use ,saves me hours, THANKS GUYS, keep it that way.
    M D | июля 27, 2015 Проверенная загрузка (Что это такое?)

    I use it by develope designs and products , use them in 3d-printing , and industry, the update is better and fasater in use , thanks to all who made it possible .it saved me hours of moddeling .


  • This is pretty cool
    Rick Boisvert | июля 20, 2015 Проверенная загрузка (Что это такое?)

    I have only played with it a little so far, but it is really great. And free to boot!


  • Fantastic!
    Peter Crawley | июля 19, 2015 Проверенная загрузка (Что это такое?)

    Brilliant. Ideal for those occasions when you need a real thread (rendering in this case). One suggestion: Radio-button for switching between metric/imperial templates rather than browsing for template each time. Doesn't terminate internal threads correctly if the hole-end plane is a curved face, and (as mentioned in another review) it stops the thread-note from working in the drawing environment. Still deserves 5 out of 5 because it's very useful and it's free!


  • Seriously? Sheesh, thanks coolOrange.
    autodesk autodesk | июля 15, 2015 Проверенная загрузка (Что это такое?)

    I am new to creating 3D files in Inventor Pro. I spent hours trying to figure out why my "threads" wouldn't print. Was a setting wrong? Did I export it incorrectly? Was my slicer just not working? Seriously, very frustrating. A Google search revealed this gem from coolOrange and BAMM! I had threads. I don't know what is a bigger deal... the fact that Autodesk let me down (nearly to the point of LYING to me!) or these geniuses solved my problem. I haven't fully utilized this plugin, but I will. Either way I owe coolOrange a big Thank You!


  • threadModeler: Practical
    Antal Rendes | июля 14, 2015 Проверенная загрузка (Что это такое?)

    Clever little program, if true 3D appearance is required. It is useful because it speeds up the work, so we can be more productive. I would recommend to all Inventor users. CoolOrange Thank you! Antal Rendes


  • works well for my needs
    Lee Church | июля 09, 2015 Проверенная загрузка (Что это такое?)

    No more cartoonish looking threads.


  • Ken turner
    ken turner | июля 06, 2015

    Excellent free plug in, does everything that I need.


  • Better Than Building Threads Manually
    Fred Washington | июня 22, 2015 Проверенная загрузка (Что это такое?)

    The tool is easy to use on straight thread. It didn’t work well on NPT (tapered) thread. Would like it to automatically create end chamfers and add a feature to cleanly end external threads.


    Cool Orange (Разработчик) | июля 08, 2015

    Hi Fred, with this new version 16.0.31.0 NPT threads are supported. Markus


  • Fine
    Luis Kopp | июня 22, 2015 Проверенная загрузка (Что это такое?)

    It helps you very much to create an screw for 3D It must be an original part of Inventor because it increases its versatility Recommended for any Inventor user


  • Very useful
    Esteban Martinez | июня 21, 2015 Проверенная загрузка (Что это такое?)

    Save time when you need to go more realistic for rendering as well as 3D printing.


  • Super Tool
    Heinz-Gerd Erkens | июня 20, 2015 Проверенная загрузка (Что это такое?)

    kann fast nicht glauben, wie toll.Habe bisher immer viel Zeit verbracht, für 3D Druck, das Gewinde zu konstruieren. Phantastisch !!!!!!!


  • Version 2018
    Rodolfo Ramos Castelo Branco | июня 18, 2015 Проверенная загрузка (Что это такое?)

    When will the 2018 version be ready? Thank you


    Cool Orange (Разработчик) | июля 08, 2015

    Hi Rodolfo, with this new version 16.0.31.0 also smaller threads are supported. If you are missing any, please contact support@coolOrange.com. Markus


  • Great Thread modeller
    Mark Owbridge | июня 16, 2015 Проверенная загрузка (Что это такое?)

    Very easy to use. Would perhaps be good if the thread became a part of the original body instead of creating a new body. Otherwise fantastic App!


  • Works Okay, all threads need chamfer
    Manny Mistry | июня 12, 2015 Проверенная загрузка (Что это такое?)

    works well on internal & external threads, but is there any way the thread can start 1 to 1.5 pitch before the front face. this I think would cut into the chamfer.


  • Thread of hole feature
    Rainer Proehl | июня 08, 2015 Проверенная загрузка (Что это такое?)

    Great tool but it would be nice to grap the thread out of the hole feature. For now I have to remoddel each hole by taking away the thread and add it via thread command - or did I miss something?


  • perfecto
    Samuel Del Amo | мая 27, 2015 Проверенная загрузка (Что это такое?)

    este plugin deberia venir de serie con el inventor. muy bueno


  • Артур Одров
    Artur Odrov | мая 21, 2015 Проверенная загрузка (Что это такое?)

    Хорошее дополнение. Спасибо разработчикам


  • Buen App
    Christopher Arregui | мая 10, 2015 Проверенная загрузка (Что это такое?)

    Lo recomiendo, es la unica alternativa existente actualmente.


  • Great Idea. Well Made. Slight Adjustments Recommended.
    William Mann | мая 07, 2015 Проверенная загрузка (Что это такое?)

    If you want a quick and realistic looking thread dropped into your model for visual purposes and don't particularly care of how it is done, this is perfect. My criticisms are these: No chamfered edge at thread end(s), thread has no ability to update with changes to part and would need to be deleted and remade, and I'm not particularly fond of the method by which it's created. No chamfer at end(s): I'm not really sure why this wouldn't be included save for maybe telling inventor how to differentiate between a thread that terminates at the end of a shaft and, for example, one that ends half way along the shaft of a bolt. However, finding a way to do that would help tremendously. Thread doesn't update: I haven't the slightest clue how difficult this might be. I would wonder if maybe the code could create unique parameter names then use those parameters to drive the features and finally, link said parameters to thread specification. Again, I don't know how difficult this is and may not be reasonable. But I do know that the sketches used to create the thread (at least where I saw) were not constrained or dimensioned. The numbers, as far as I can tell, are simple pulled and the geometry created in the code rather than dimensions being applied. Thread modeling preferences: This is probably more to do with my personal opinion, but it seems unnecessary to me that a portion of the shaft be cut away, a new solid be revolved in it's place, and a coil-cut remove material from the new solid to create the thread. I'm sure there may be reasons this approach was the one used but I don't really understand. The typical modeled shaft (unless I'm mistaken) matches the ID or OD giving you the maximum amount of material. Wouldn't it be easier to have coil-cut simply remove the extra material? Overall, great tool for visual purposes. May be asking a bit much for the thread/hole tool to recognize it. This isn't the "thread" feature as inventor sees it and since the thread/hole tool in drawings is already made, I would image coolOrange would need to make a brand new tool for the drawing that reads their threadmodeler tool. Sorry for the novel. Just being thorough. Awesome work.


  • coolOrange thread modeller
    Greg Bellman | мая 07, 2015 Проверенная загрузка (Что это такое?)

    Works very well for Vee threads on short components. Have not tried Trapizoidal or Acme thread forms. Models I use it for are st stl fittings and thread form is short so I does not add too much to the file size. I did test a 180mm long thread and my graphics card was struggling.


  • Works great
    Greg Ozzimo | мая 05, 2015 Проверенная загрузка (Что это такое?)

    When you need real threads for 3D printing, this is it!


  • Very handy program for 3d printing.
    Belg Ske | мая 04, 2015

    I've used it for printing some things with thread. Great tool.


  • Life saver
    florin chirita | апреля 28, 2015 Проверенная загрузка (Что это такое?)

    I am using for 3d print. Thank you.


  • Goooooodddd
    Oiled Garcia | апреля 24, 2015 Проверенная загрузка (Что это такое?)

    Th


  • Great time saver, Use "combine" to add chamfers post threading
    Adrian Basford | апреля 17, 2015 Проверенная загрузка (Что это такое?)

    Great for a free app. Check out the video tutorial by CloudCAD https://www.youtube.com/watch?v=ZxiN_M5zwO4


  • Okay, doesn't work all the way
    DAVE MITCHELL | февраля 18, 2015 Проверенная загрузка (Что это такое?)

    So I downloaded this app so I could use it to created copied versions of our working files that would show threads for our product shots. Unfortunately, while the threads look okay in Inventor, (minus chamfer issues), the threads won't even show up in Showcase, which is what I use to get our images. The app needs some work! Okay, after talking with my VAR, seems you need to "combine" solids after you cut the threads in order to then apply chamfers, etc as well as export to 3DS or Showcase, is working now, just wish Cool Orange would have made a way to allow easy changing of a thread once the feature had been created, currently all it does is create a sketch which isn't tied to anything if you try and edit it...


    DAVE MITCHELL | марта 27, 2015

    After working with our VAR, we have it working. If you want to cut chamfers or holes afterwards, you have to "combine" bodies before doing any post work or exporting to 3ds or Showcase, I also wish there was an easy way to change the thread after creation, the only way I can fine to change is to delete the features and redo it as the sketch created has no dim's and isn't tied to anything..

Наверх