Topo Align 2019Win64, English
General Usage Instructions
Launch the app from the ribbon button.
Select if you will use a single element or edge(s) to align your toposurface.
Set the divide edge distance. This value is the maximum spacing a straight edge will be divided by. Curved edges are automatically tessellated.
Set the vertical offset from the selected face.
Choose if the topo should be aligned to the top or bottom face of the element.
Click Align to Element. Click on the topo to be aligned then click on the element or edges.
To use Points from Lines you must place model lines (lines and curves only) and then must be physical location below the topo surface.
Reset region asked for you to pick an existing topo surface in the existing project phase and new topo surface (usually created as a graded region). You pick a rectangular region in a plan view and topo points within that region are deleted from the new topo surface and new points copied across from the existing topo surface. This will not reset boundary points.
The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin.
You may need to restart the Autodesk product to activate the app/plug-in.
To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8.1/10) and uninstall as you would any other application from your system.
While you can select a family the addin attempts to find the topmost or bottommost face to align the topo surface too. Depending on the complexity of the family this can lead to unexpected results. Families which are joined to other families can also generate errors. Pick edge has been included to allow the topo to be aligned to an individual edge within families or elements.
The app is not digitally signed. Click Always load when prompted at the Security Unsigned Addin dialog.
|Version Number||Version Description|
|Updated to support Revit 2019|