1-PPR TYPE

Create a PPR type pipe and create a new segment. Create your own fittings.

PPR pipe type uses its own diameters.

Used only in the metric system.

In order to create the PPR pipe type, the standard pipe type must be loaded in the active document. Duplicates the fittings of the standard pipe type.

2-BLACKIRON PIPE TYPE

Create a BlackIron type pipe and create a new segment. In order to create the BlackIron pipe type, the Chilled Water pipe type must be loaded in the active document.

Uses threaded fittings up to 2" pipe diameter, and welded fittings for diameters greater than 2".

It loads the welded fittings from the Chilled Water pipe type. It loads the threaded fittings from the families in its own folder.

3-PIPE CLAMP

It only draws clamps on horizontal pipes.

To draw the clamps you need to select a pipe at the level you want to draw. It only draws on the selected level.

Clamp spacing is 3m.

It is drawn on the rods with the clamp. If there is a floor above the pipes, the rods extend until that floor.

4-SCHEDULE PIPE SYSTEM

It takes the meter of the pipes on the same floor and in the same pipe system of the pipe you selected.

5-SCHEDULE PIPE  BYPİPE TYPE

It takes the meter of the pipes on the same floor and in the same pipe type of the pipe you selected.

6-SCHEDULE PIPE CLAMP

Pipe clamps prepare a list according to the active view and the model.

7-DUCT HANGER

The console draws only the horizontal and rectangular air ducts.

To draw the console, you need to select an air duct on the floor where you want to draw the console. It only draws on the selected floor.

Console spacing is 1.5m.

If there is a floor above the air duct, the rods extend to this floor.

8-CABLE TRAY HANGER

The console draws only the horizontal cable trays.

To draw the console, you need to select a cable tray on the floor where you want to draw the console. It only draws on the selected floor.

Console spacing is 1.5m. 

If there is a floor above the cable tray, the rods extend to this floor.

9-COUNT FAMILY INSTANCES

It counts the same family instances in the whole model as the family instance you choose.

10-CREATE SHEET

You can create sheets in Revit with sheet names in Excel.

Sheet names must be in the first column of Excel's first sheet.

11-CREATE UNIONS

Create Unions at 3m, 4m, 6m intervals on selected pipes in Active View.

12-FABRİCATION PARTS.

Command optimizes length and places hangers for the fabrication of straight parts.

Not used for optimized length parts.

Fabrication straight parts must be selected before running the command.

The installer that ran when you downloaded this app/plug-in from Autodesk App Store will start installing the app/plug-in. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart the Autodesk product to activate the app/plug-in. To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 7/8.1/10) and uninstall as you would any other application from your system.