Wall Chamfer (Trial)

Wall Chamfer (Trial)

Versión de prueba
SO:
Idioma:

Descripción

Sometimes you need to chamfer two walls in a corner (especially in Hospitals, Clinics, etc, based on some design codes and standards).

 

Most of the time it could be very time-consuming because you need to set start and endpoint of chamfer, draw a new wall, adjust its parameters, sometimes trim the main walls to the chamfered wall (of course manually) and….

 

 

But with this app, it would be so easy to chamfer walls, just select two walls and it is done!

And as long as you don’t cancel the command, you can draw as many chamfered walls as you want.

 

In configurations window you can set some options for the chamfered wall include:

Wall Type, Location Line, Base Constraints, Base Offset, Top Constraints, Top Offset, and Unconnected Height.

Also, you can choose whether you want to trim the main walls or not.

Descripción de la versión de prueba

You can use this app for 10 days and then if you like it you can buy it from Autodesk Appstore under BIMODEL Publisher.

(You must be logged in to Autodesk to use the plugin).

Acerca de esta versión

Versión 1.2.0, 24/01/2022
Compatibility with Autodesk® Revit® 2022

Capturas de pantalla y vídeos


Reseñas de clientes

0 reseña
Obtener ayuda técnica
Ir arriba