Avoid MEP clashes
Fizetve
OPERÁCIÓS RENDSZER:
Nyelv:
Leírás
Plugin for Autodesk® Revit® 2018-2021 to resolve clashes MEP systems (Pipes, Ducts, Cable Trays, and Conduits). The plugin allows you to adjust many parameters and find clashes in elements in the host and linked models.
Main features of the plugin:
- You can select the main elements in the host or in linked models or can combine it from both.
- It works with any types of Pipes, Ducts, Cable Trays, and Conduits.
- Is saves insulation and lining for Pipes and Ducts.
- It saves all parameters from the source element and you can select to copy or not mark value.
- You can select any offset between the main element and clashed with the MEP element.
- You can select any angle of tracing between 1 and 90 degrees.
- All last used settings are saved.
- App works in 3D and Plan/Section views.
- App works with millimeters and inches.
Verzióinformáció
Verzió 1.1.1, 2022. 11. 11.
Fixed bug, when intersections wasn't found
I'm student don't have monney, so i can get the trial plugin
Coordination will be much easier with this tool.
Thank you.
Please make for latest versions of Revit.
this tool helps alot
Hello, version for Revit 2022-2023 available. please see list of all or apps.
Good Job!!
h còn bản nào free ko a nhỉ
REVIT NO VOLVERA A SER EL MISMO CON ESTO, LO PEOR ES QUE NO SE DESDE QUE AÑO ESTA DISPONIBLE :(
Hello, version for Revit 2022-2023 available. please see list of all or apps.
This is a great tool. I could really want this to be used for fabrication as well. Please see if you can intergrate this with MEP Fabrication.
Keep it up. All the best.
THANK YOU
Lo instale pero no corre en Revit 2022
Yo tambien espero que lo actualice a Revit 2022
Hello, version for Revit 2022-2023 available. please see list of all or apps.
has a small bug, mistakes the level mark by 5mm
No more millions of split lines, stepping, dragging and trimming. Now, it's all with a few clicks!
A few issues on my side (2022-03-30), V1.1.1:
Hi, great job but a lot of times tool doesnt work correctly
Thank you for more than affordable price.
Thanks, your add-in works great and saved me a lot of time.
Good job !
Спасибо хотелось бы обновы до 22 версии
I agree. Is there a possibility to see this for ver2022?
Thanks, your add-in works great and saved me a lot of time. Good job ! +1 go to ver 22))
Hello, version for Revit 2022-2023 available. please see list of all or apps.
SAVES A LOT OF TIME.
TKS MAN...
Very useful tool. It saves a lot of time when solving clashes.
I would suggest to implement a rectangle selection mode.
Great and simple! Saves a lot of time! Thank you!
1.0 worked great, but 1.1 is giving me the error of "No clashes found"
is the addin compatible with revit 2017 ??
Добрый день. Отличный плагин, но последнее время пояаилась проблема. При использовании вылетает сообщение "Main element very long, one of ends not found". Не подскажите решение?
Добрый день. Обычно такая ошибка возникает при попытке обойти например стены в бок, но до края стены достаточно большое расстояние и нет смысла тянуть до туда трубу. Можете, пожалуйста, отправить на почту, указанную в контактах, скрин с ситуацией, в которой возникает данная ошибка?
Greetings!
Isn't this supposed to be free? At least it says so on main list of add-ins.
Thank you!
very good!
Огромное Вам спасибо! Замечательный плагин для работы не только с архитектурой и конструктивом, но и другими инженерными сетями!
В Revit 2018 и 2019 после выбора элементов MEP при нажатии OK пишет "Something goes wrong".
Очень хочется воспользовться плагиином. Что можете посоветовать?
Дамир, обычно данное сообщение появляется, когда при заданном зазоре невозможно построить новую геометрию физически, например, не помещаются вертикальные элементы вместе с отводами. К сожалению, в таком случае можно только увеличить величину отступа, или также попробовать изменить тип отводов, сделав их меньшего размера. Также данная ошибка возможна, если редактирование выбранного объекта запрещено.
попробуйте увеличить требуемое расстояние между элементами. Возможно не хватает места, чтобы построить отводы
Данный плагин работает только на 3d виде. На планах при работе вылезает ошибка "Something goes wrong"
Владислав, спасибо за пояснение! Неплохо бы эту особенность (работу только в 3D) добавить в описание плагина. Возможно ли исправить это ограничение, чтобы работать и на Планах? Примечание: смог подключить плагин к Revit 2015, но хоть он и запускается, но не отрабатывает. Теперь понятно, почему автор обозначил поддержку с Revit 2018. Поддержку старых версий не прошу. Очень благодарен и за текущую версию.
Thank's for great job! People like you are helping for world BIM community very much!
Классная вещь, которая упрощает жизнь инженеров MEP! Отличная работа, Николай. Спасибо за предоставленный плагин.
Thank you very much brother..love from India. Pramod
Great Job
Thank you :)
this is probably one of the better app I use !
just need à french translate !
Thank's for dev'