Avoid MEP clashes

Avoid MEP clashes

지불됨
OS:
언어:

설명

Plugin for Autodesk® Revit® 2018-2021 to resolve clashes MEP systems (Pipes, Ducts, Cable Trays, and Conduits). The plugin allows you to adjust many parameters and find clashes in elements in the host and linked models.

 

Main features of the plugin:

  • You can select the main elements in the host or in linked models or can combine it from both.
  • It works with any types of Pipes, Ducts, Cable Trays, and Conduits.
  • Is saves insulation and lining for Pipes and Ducts.
  • It saves all parameters from the source element and you can select to copy or not mark value.
  • You can select any offset between the main element and clashed with the MEP element.
  • You can select any angle of tracing between 1 and 90 degrees.
  • All last used settings are saved.
  • App works in 3D and Plan/Section views.
  • App works with millimeters and inches.

이 버전 정보

버전 1.1.1, 2022-11-11
Fixed bug, when intersections wasn't found


스크린샷 및 비디오


고객 리뷰

26 리뷰
기술 도움말 보기
  • Good and Simple
    Le Thanh An | 9월 21, 2022 다운로드 확인 (이것은 무엇입니까?)

    Good Job!!


  • GENIAL!
    Diego Ignacio Toledo Campusano | 8월 22, 2022 다운로드 확인 (이것은 무엇입니까?)

    REVIT NO VOLVERA A SER EL MISMO CON ESTO, LO PEOR ES QUE NO SE DESDE QUE AÑO ESTA DISPONIBLE :(

     


  • MEP Fabrication
    Besjon Doda | 7월 23, 2022 다운로드 확인 (이것은 무엇입니까?)

    This is a great tool. I could really want this to be used for fabrication as well. Please see if you can intergrate this with MEP Fabrication.
    Keep it up. All the best.


  • VERY GOOD
    병우 최 | 7월 01, 2022 다운로드 확인 (이것은 무엇입니까?)

    THANK YOU


  • No hay versión 2022
    TECNOBIM CENTRAL | 5월 03, 2022 다운로드 확인 (이것은 무엇입니까?)

    Lo instale pero no corre en Revit 2022

    Francisco Perez | 5월 23, 2022

    Yo tambien espero que lo actualice a Revit 2022


  • Good Job! Thank you
    Yuriy Saraily | 4월 12, 2022 다운로드 확인 (이것은 무엇입니까?)

    has a small bug, mistakes the level mark by 5mm


  • Excellent Add-in for MEP Engineers
    Pieter de Waal | 3월 30, 2022 다운로드 확인 (이것은 무엇입니까?)

    No more millions of split lines, stepping, dragging and trimming. Now, it's all with a few clicks!

    A few issues on my side (2022-03-30), V1.1.1:

    • I cannot window select elements as per the view and must add them one by one. Luckily, this is still very fast.
    • I wish there was an option to only step once e,g, drop down as per the settings but then not step back up. This would be very time saving when using the add-in to drop say a sloping drainage pipe at 45° and then continuning the run. The pipe wouldn't step up.


  • Not work as expected
    Sergio Ramirez | 2월 02, 2022 다운로드 확인 (이것은 무엇입니까?)

    Hi, great job but a lot of times tool doesnt work correctly 


  • Must-have, lightweight, intuitive
    Olga Ka | 1월 24, 2022 다운로드 확인 (이것은 무엇입니까?)

    Thank you for more than affordable price.


  • A must have !
    Xavier Roulin | 1월 06, 2022 다운로드 확인 (이것은 무엇입니까?)

    Thanks, your add-in works great and saved me a lot of time.

    Good job !


  • Это лучший
    Ivan Gladkov | 12월 03, 2021

    Спасибо хотелось бы обновы до 22 версии

    Olga Ka | 1월 24, 2022

    I agree. Is there a possibility to see this for ver2022?

    Yuriy Saraily | 4월 12, 2022

    Thanks, your add-in works great and saved me a lot of time. Good job ! +1 go to ver 22))


  • UNBELIEVABLE !!!
    Herbert Muller | 5월 01, 2021 다운로드 확인 (이것은 무엇입니까?)

    SAVES A LOT OF TIME. 
    TKS MAN...


  • Very usefull tool
    Stefan Pandaciuc | 3월 19, 2021 다운로드 확인 (이것은 무엇입니까?)

    Very useful tool. It saves a lot of time when solving clashes.
    I would suggest to implement a rectangle selection mode.


  • Fantastic!!!
    Mladen Bosancic | 1월 27, 2021 다운로드 확인 (이것은 무엇입니까?)

    Great and simple! Saves a lot of time! Thank you!


  • 1.1.0 - No Clashes Found error
    Ken Shen | 1월 06, 2021 다운로드 확인 (이것은 무엇입니까?)

    1.0 worked great, but 1.1 is giving me the error of "No clashes found"


  • Important question before i buy it
    Kingofgeneration2012 Kingofgeneration2012 | 10월 26, 2020

    is the addin compatible with revit 2017 ??


  • Main element very long, one of ends not found
    Colt Colt | 7월 19, 2020

    Добрый день. Отличный плагин, но последнее время пояаилась проблема. При использовании вылетает сообщение "Main element very long, one of ends not found". Не подскажите решение? 

     

    Nikolai Basalaev (게시자) | 7월 20, 2020

    Добрый день. Обычно такая ошибка возникает при попытке обойти например стены в бок, но до края стены достаточно большое расстояние и нет смысла тянуть до туда трубу. Можете, пожалуйста, отправить на почту, указанную в контактах, скрин с ситуацией, в которой возникает данная ошибка?


  • Free?
    Kresimir Bedenikovic | 5월 21, 2020

    Greetings!

    Isn't this supposed to be free? At least it says so on main list of add-ins.

    Thank you!


  • very good!
    정수 장 | 1월 10, 2020 다운로드 확인 (이것은 무엇입니까?)

    very good!


  • Отличный плагин
    Vladislav Livanov | 12월 16, 2019 다운로드 확인 (이것은 무엇입니까?)

    Огромное Вам спасибо! Замечательный плагин для работы не только с архитектурой и конструктивом, но и другими инженерными сетями!


  • Massage "Something goes wrong"
    Дамир В | 12월 11, 2019 다운로드 확인 (이것은 무엇입니까?)

    В Revit 2018 и 2019 после выбора элементов MEP при нажатии OK пишет "Something goes wrong".

    Очень хочется воспользовться плагиином. Что можете посоветовать?

    Nikolai Basalaev (게시자) | 12월 13, 2019

    Дамир, обычно данное сообщение появляется, когда при заданном зазоре невозможно построить новую геометрию физически, например, не помещаются вертикальные элементы вместе с отводами. К сожалению, в таком случае можно только увеличить величину отступа, или также попробовать изменить тип отводов, сделав их меньшего размера. Также данная ошибка возможна, если редактирование выбранного объекта запрещено.

    Aleksey Kaplinsky | 12월 15, 2019

    попробуйте увеличить требуемое расстояние между элементами. Возможно не хватает места, чтобы построить отводы

    Vladislav Livanov | 12월 17, 2019

    Данный плагин работает только на 3d виде. На планах при работе вылезает ошибка "Something goes wrong"

    Дамир В | 12월 18, 2019

    Владислав, спасибо за пояснение! Неплохо бы эту особенность (работу только в 3D) добавить в описание плагина. Возможно ли исправить это ограничение, чтобы работать и на Планах? Примечание: смог подключить плагин к Revit 2015, но хоть он и запускается, но не отрабатывает. Теперь понятно, почему автор обозначил поддержку с Revit 2018. Поддержку старых версий не прошу. Очень благодарен и за текущую версию.


  • Good, simple, free
    Sergey Zhebelev | 11월 27, 2019 다운로드 확인 (이것은 무엇입니까?)

    Thank's for great job! People like you are helping for world BIM community very much!


  • Great plugin!
    Sergey Livada | 11월 25, 2019 다운로드 확인 (이것은 무엇입니까?)

    Классная вещь, которая упрощает жизнь инженеров MEP! Отличная работа, Николай. Спасибо за предоставленный плагин.


  • Its Excellent
    Pramod Kumar | 11월 25, 2019 다운로드 확인 (이것은 무엇입니까?)

    Thank you very much brother..love from India. Pramod


  • It works
    Mostafa El-Sherif | 11월 22, 2019 다운로드 확인 (이것은 무엇입니까?)

    Great Job

    Thank you :)


  • already a must have
    David Grassin | 11월 22, 2019 다운로드 확인 (이것은 무엇입니까?)

    this is probably one of the better app I use !

     

    just need à french translate !

    Thank's for dev'

맨 위로 이동