Versión de prueba


If you often come across dwg files exported from visualization programs such as Autodesk® 3Ds Max® or SketchUp, then you certainly notice that the 3D models in these files are not solid, but polygonal ones, consisting of meshes. Moreover, often Polyface Mesh is found, which has not been used in dwg for a longer period. No command works with these meshes. These meshes can neither be measured, nor transformed into something normal nor even exploded.
But now you have a tool that will solve this problem. The MeshToSolid command works with both older Polyface Meshes and normal Meshes (SubDMesh). It will allow you to collect a solid from the meshes, and if that doesn't work, then at least convert the PolyfaceMesh to Mesh. As a last resort, you now also have a mesh explosion program that converts any meshes into lines in one click. Now you can measure this architectural sketch normally in order to build a complete solid model.


  • Convert PolyfaceMesh to Mesh.
  • Glue scattered pieces of mesh into one closed mesh.
  • Convert closed meshes to 3D solid.
  • Convert the 'Body' object (Acis, SAT) to a 3d solid.
  • Transfer the colors and materials of meshes or individual polygons to the corresponding solid face (this option must be enabled in the settings).
  • Explode PolyfaceMesh and 3D Face on Lines.
  • Meshes can be selected before calling commands.
  • You can handle many meshes at once.
  • Mesh properties (layer, color ...) are transferred to the new solid / lines.
  • Commands do not require any configuration.

Meshes with more than 10,000 faces are not processed as this can obscure CAD. But this figure can be adjusted.

Regardless of the AutoCAD language, you can switch the plugin's dialogs and messages into the following languages: English, German, Italian, Russian, and Chinese.

Descripción de la versión de prueba

To run the plugin, you will have to register account and top up your account balance or receive bonuses.

Then you can activate one of the licenses:


Acerca de esta versión

Versión 2024.05.01, 13/05/2024
Added the ability to save the colors and materials of solid faces based on the color of the original meshes and their individual polygons. Added a settings dialog to the AVC Options Palette. MeshToSolid fixed: the setting for limiting the number of polygons in the mesh was not disabled when set to 0. Deleted MeshToSolidOptimize and MeshToSolidMaxFaces commands

Capturas de pantalla y vídeos

Reseñas de clientes

3 reseñas
Obtener ayuda técnica
  • Limited
    m design | marzo 26, 2024

    Confident that it would work, I paid before trying it. It went wrong, this plugin is limited to 10,000 faces, and i have elemts with more than 30000 faces. No return available?

    Alexandr Chernishev (Editor) | marzo 27, 2024

    If you read the description of the program (, you will notice that this limitation can be reconfigured. Use the MeshToSolidMaxFaces command. However, even if you can convert your giant mesh into a solid one, you still won’t be able to work with it in AutoCAD. AutoCAD is designed for solid-state graphics and is very difficult to cope with a huge number of polygons. You should first simplify your mesh in the program from which you imported it (3DS Max, for example).

  • Great program
    Olga Neronski | diciembre 08, 2023 Descarga verificada (¿Qué es esto?)

    I often receive models from partners converted from SketchUp and they are very difficult to use. Previously, I redrew everything as solids. Now I have a program that does this job in 1 click. Fabulous!

    Alexandr Chernishev (Editor) | diciembre 08, 2023

    Thank you

  • Не справляется с поставленной задачей
    Степан Казаков | enero 24, 2022 Descarga verificada (¿Qué es esto?)

    1. Демо версия настойчиво просит донат / покупку

    2. Не замыкает объем из-за чего не может собрать 3dsolid

    чуть менее чем полностью бесполезная штука

    Alexandr Chernishev (Editor) | enero 25, 2022

    1. У старой версии (которую вы скачивали из AppStore) нет демо-версии. Скачивайте новую версию с офсайта ( Там уже можно активировать демо-период 20 дней. 2. Латать дырявые сети в сплошной объем - это задача пользователя. Такой функциональности никто не заявлял. Да и не возможно это. Всю заявленную функциональность программа выполняет, экономит уйму времени. В частности при конвертации рваных сетей, импортированных SketchUp. Cрабатывает там, где штатные команды AutoCAD бессильны.

Ir arriba