Ask LOCATOR to locate a specific Kilometric Position (KP) on the selected Axis.
LOCATOR will do the following for you:
i. Take you to a specific point with absolute accuracy.
ii. Zoom over the requested KP location.
iii. Draw a line perpendicular to the working Axis at the exact point.
iv. Add a Legend at the corner of the perpendicular line with the requested KP.
v. Add a row at the table on the Locator palette with the calculated location data.
Like that, not only have you quickly and easily and located the requested position, but you also have the transversal to the original Axis, to work with.
But LOCATOR can do a lot more for you. Every time you need to know the KP of an item or a point in the drawing, use LOCATOR.
LOCATOR will answer immediately, without letting you lose any more time in searching for this kind of information.
Additionally, if you need the coordinates of multiple KPs you can define start KP, end KP, and the interval length and LOCATOR will
i. calculate all coordinates,
ii. draw all transversal lines and
iii. add rows at the table in a flash
With just a click you may export the table that contains all calculated data to an Excel file
You may change the design parameters (color, linetype, font height, line length, etc.) for each axis and all changes will be saved in the drawing.
You may define several axes in the same drawing
You may copy axes from one drawing to another and retrieve all locator data in the new drawing
You may paste multiple KP values from the Excel file into Locator's palette table
Wait till LocatorX gets published!
Note: This app uses a custom installer (and not the standard App Store installer).
Informazioni sulla versioneVersione 200.100, 18/01/2021
Informativa sulla privacy dell'autore