
MeshToSolid
Testversion
Betriebssystem:
Sprache:
Beschreibung
If you often come across dwg files exported from visualization programs such as Autodesk® 3Ds Max® or SketchUp, then you certainly notice that the 3D models in these files are not solid, but polygonal ones, consisting of meshes. Moreover, often Polyface Mesh are found, which has not been used in dwg for a longer period. No command works with these meshes. These meshes can neither be measured, nor transformed into something normal, nor even exploded.
But now you have a tool that will solve this problem. The MeshToSolid command works with both older Polyface Meshes and normal Meshes (SubDMesh). It will allow you to collect a solid from the meshes, and if that doesn't work, then at least convert the PolyfaceMesh to Mesh. As a last resort, you now also have a mesh explosion program that converts any meshes into lines in one click. Now you can measure this architectural sketch normally in order to build a complete solid model.
Capabilities:
- Convert PolyfaceMesh to Mesh
- Glue, scattered pieces of meshes into one closed mesh
- Convert closed meshes to 3D Solid
- Explode PolyfaceMesh and 3D Face on Lines
- Meshes can be selected before calling the commands
- You can handle several meshes at once.
- Mesh properties (layer, color ...) are transferred to the new solid / lines
- Commands do not require any configuration
Meshes with more than 10,000 faces are not processed as this can obscure Autodesk® AutoCAD®.
To run the plugin, you will have to register account and top up your account balance by making a donation or receiving bonuses.
- Annual license - 10 USD.
- Unlimited license - 50 USD. Free updates for 1 year.
- The trial period is 20 days.
Test-Beschreibung
You can use the program for free, but from time to time the activation window will appear. If you donate at least $10, to disable this window.
Informationen zu dieser Version
Version 2020.10.02, 29.03.2023
New activation system
1. Демо версия настойчиво просит донат / покупку
2. Не замыкает объем из-за чего не может собрать 3dsolid
чуть менее чем полностью бесполезная штука
1. У старой версии (которую вы скачивали из AppStore) нет демо-версии. Скачивайте новую версию с офсайта (https://sites.google.com/site/avcprg/download). Там уже можно активировать демо-период 20 дней. 2. Латать дырявые сети в сплошной объем - это задача пользователя. Такой функциональности никто не заявлял. Да и не возможно это. Всю заявленную функциональность программа выполняет, экономит уйму времени. В частности при конвертации рваных сетей, импортированных SketchUp. Cрабатывает там, где штатные команды AutoCAD бессильны.