EN Plastic Pipes catalog (Pipe Network)

EN Plastic Pipes catalog (Pipe Network)

Gratuito
Sistema operativo:
Lingua:

Descrizione

Autodesk® Civil 3D® Pipe Network, plastic pipes, catalog to be used according to EN standards. Content has been realigned from the version 2022.0. Pipes are divided into 2 main groups (Generic and Manufacturer). All pipes are now fully based on EN/ISO standards. Additional information has been attached into pipe properties if applicable according to the standard (PN, SDR, SN, Design Coefficient C, Minimum Required Strength, Material Class etc.). In addition, classification property has been included with a default value to CCI (Construction Classification International) but it can be changed to any other if needed (through editing). Manufacturer specific content is now divided into its own catalog. Manufacturer specific pipes are also divided according to EN/ISO standard, but product names are used according to Manufacturer data sheets. Additional parameters (if available) are included like Manufacturer, Manufacturer Source, Field of Application, Connection Type, Transport Type, Form Type, Color, Weight (kg/m) etc. More information about Manufacturer specific content can be found from the publisher webpage.  

 

Catalog includes:

  • EN Plastic Pipes (Generic)
  • EN Plastic Pipes (Pipelife)

EN Plastic Pipes (Generic) components based on the following standards:

  • Conduit systems (for cable management) (EN 61386-24) – HDPE pipes (DN 25 – DN 250)
  • Fibre organisers (optical fibre systems) (EN 50411-6-1) – LDPE / LLDPE / MDPE / HDPE / PP (DN 3 – DN 16)
  • Non-pressure (drainage, sewerage) (EN 1401-1) – PVC-U (SDR 27.6 – SDR 51; DN 110 – DN 1000)
  • Non-pressure (drainage, sewerage) (EN 1852-1) – PP (SDR 22 – SDR 41; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 12666-1) – PE (SDR 17 – SDR 33; DN 110 – DN 1600)
  • Non-pressure (drainage, sewerage) (EN 13476-2) – PVC-U / PP / PE (Type A; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 13476-3) – PVC-U / PP / PE (Type B; DN 110 – DN 3000)
  • Non-pressure (drainage, sewerage) (EN 14758-1) – PP-MD (SDR 33; DN 110 – DN 1000)
  • Non-pressure (soil, waste – discharge) (EN 1451-1) – PP (SN 2 – SN 6.3; DN 32 – DN 315)
  • Pressure (gas) (EN 1552-2) – PE (SDR 11 – SDR 17.6; DN 16 – DN 630)
  • Pressure (water, drainage, sewerage) (EN 12201-2) – PE 40 / PE 80 / PE 100 (SDR 6 – SDR 41; DN 16 – DN 2500)
  • Pressure (water, drainage, sewerage) (EN ISO 1452-2) – PVC-U (SDR 11 – SDR 41; DN 12 – DN 1000)
  • Pressure (water, drainage, sewerage, irrigation) (EN 17176-2) – PVC-O (SDR 17 – SDR 65; DN 63 – DN 1200)


EN Plastic Pipes (Generic) components based on the following standards:

  • Additional info available at publisher website


Note: This catalogue can be successfully used with Autodesk® Storm and Sanitary Analysis package, because pipes will be always carried over with its real pipe inner diameter value. Pipe general diameter or any other property can be used in labels or taken over into Property Set Definitions.

Important: Content pack has been tested with Civil 3D 2024 only. Although the content pack is not fully tested with previous Civil 3D versions, it should work with some versions back without any major issues.

 

Note: This app uses a custom installer (and not the standard App Store installer).

Informazioni sulla versione

Versione 2024.0.0, 03/11/2023
2024.0.0 - edited release


Schermate e video


Recensioni dei clienti

5 recensioni
Richiedi assistenza tecnica
  • 2024 Version
    Roberts Zvejnieks | ottobre 09, 2023 Download verificato (Guida rapida)

    Looks very good but when will it be available for the 2024 version?

    Raido Puust (Autore) | novembre 03, 2023

    Thanks for your interest! It is now published and tested with the C3D 2024.


  • Uponor
    Shafiq Mohammad | settembre 08, 2022 Download verificato (Guida rapida)

    Uponor pipe is not inluded in this catalog the previous verstion 2020 had it. 

    Raido Puust (Autore) | settembre 08, 2022

    That is quite right, because the current version had major upgrade and focused around EN/ISO standards. Manufacturer specific content is based on those standards and anyone is free to add that information during the design (name, type etc.). For example as a separate property in their property set. This can be easily done and there is no point to keep the data (pipes as content) for various manufacturers because the content pack starts to repeat itself.


  • awesome catalog
    Yemen Yazici | marzo 29, 2022 Download verificato (Guida rapida)

    thank you fro all works; awesome catalog

    Raido Puust (Autore) | marzo 31, 2022

    Good to know, thanks!


  • Excelent
    Rosário Dilo | settembre 02, 2017 Download verificato (Guida rapida)

    A catalog that was needed in Pressupe pipe and pipes network


  • perfect!
    Ingmar Aija | marzo 17, 2017 Download verificato (Guida rapida)

    excellent catalog

    Clint Davis | dicembre 12, 2023

    What's the chance of getting an imperial version?

Vai all'inizio