TL Grade Diagram

TL Grade Diagram

Todor Latev

System operacyjny:


This app will generate grade diagrams at points on Autodesk® Civil 3D® tin surfaces, visualizing the possible directions where the grades fall within a specified range.
It aids the civil designer during the initial alignment/route selection process on any sort of linear structure (road, canal, pipeline, etc) where the design criteria impose restrictions on the min/max allowable grades. By chaining a series of diagrams together, a first draft alignment with the desired properties can be constructed.

Upon initial invocation, the app will ask the user to pick a tin surface, specify minimum and maximum grades and input a segment/leg distance. Once these parameters are defined, the app will compute and dynamically draw the grade diagram at any point on the surface.

Grade diagram computation:

  • the input point is projected to the surface to obtain an elevation
  • a total of n points is sampled on the surface around the perimeter of the input point at a distance d, where the n is the number of envelope points and d is the segment distance
  • grades are computed from the center point to point i
  • a line is drawn from the center point to point I on the perimeter if the Abs of grade is less than the max grade
  • an envelope correction distance is computed for every point I and all points along the perimeter are projected to the surface and connected to form a 3d polyline (the diagram envelope)

Please refer to the complete app documentation and the attached images for more details

Przeczytaj dokument pomocy

Informacje na temat tej wersji

Wersja 2020.02.03.1, 18.02.2021
Initial release

Zrzuty ekranu i nagrania wideo

Recenzje klientów

(0 recenzja)


Pomoc techniczna
Przejdź do góry