Pressure Network PE catalog for EU market

Pressure Network PE catalog for EU market

FlowBIM
Бесплатное

ОС:
Язык:

Описание

Autodesk® Civil 3D® Pressure Network PE catalog to be used in EU countries (most applicable). Components include additional information about its manufacturer but this is not included into the component name (for example, DN200 pipe is used as a pipe name, instead of Pipelife DN200 or Uponor Infra DN200 pipe).

Catalog includes:

  • Pressure class: SDR33 - SDR7.4
  • Pipe diameters: DN16 – DN1600
  • Fittings based on its connection type (electrofusion, segmented) that can be combined with each other
  • All components include full list of parameters that can be used in labels
  • Pressure class dependent wall thickness for all components
  • About 200 PE pipes + more than 1700 fittings (when counting pressure class variations)

 

Important: Content pack has been tested in Autodesk® Civil 3D® 2015 - 2021.

 

Note: This app uses a custom installer (and not the standard App Store installer).

Прочитать справку

Сведения об этой версии

Версия 2021.0, 13.07.2020
Added 2021 support.

Политика конфиденциальности разработчика

Скриншоты и видео


Рецензии клиентов

(6 оценки)

|

Техническая поддержка
  • Good
    Grover Cano | ноября 16, 2019 Проверенная загрузка (Что это такое?)

    gracias por el material ,  muy util... Bendiciones!


  • Great tools, but problem on C3D 2019
    Károly Kiss | декабря 05, 2018 Проверенная загрузка (Что это такое?)

    It is working perfect on 2018, but in 2019 I see unknown material. What's the problem?


    Raido Puust (Разработчик) | декабря 18, 2018

    There should be no difference in terms of 2018 or 2019. Please check if you are using Country Kits, sometimes those do affect the use of catalogue, because path variables are changed. Also consider following the same procedure as with 2018 - create a parts list, save a drawing, restart Civil 3D. There are couple of comments that this was a needed step. And this is not because of the current catalogue, but a more like a general issue - when catalogue file is switched. Hope it helps. Also check some guidelines from the help page (given below).


  • PE piping Spec for Plant 3D
    Ole-Jørgen Skaar | ноября 12, 2018 Проверенная загрузка (Что это такое?)

    I am looking for this Calalouge for Plant 3D. Is it possible to install this for Plant 3D?


    Kees Rodenburg | февраля 14, 2019

    Hei Ole-Jørgen, did you receive any help? I am looking for the same: Pipelife catalog for Plant 3D


  • Great initiative
    Robert Månsson | мая 08, 2018 Проверенная загрузка (Что это такое?)

    I was about to write something about it not working - but, as the above user stated: restard C3D once after the installation and everything works. Great library of PE pipe sizes!


    Raido Puust (Разработчик) | мая 09, 2018

    Good to know that it worked out!


  • Poor install - USER ERROR!
    Daniel Darwin | октября 31, 2017 Проверенная загрузка (Что это такое?)

    This install appears to install correctly, but obviously, it required a restart.... sorry for the initial poor review, and thank you for the reply.

Наверх