Native Trackpad

Native Trackpad


Operační systém:


This add-in fixes two finger pan and pinch to zoom gestures where gestures are not being recognized or where they are slow. On top of that it adds inertia to two finger pan. This is done by replacing Fusion's gesture recognizer with macOS native recognizer.


macOS Catalina is not supported


Install instructions


Support development


Know issues: in order to scroll Data panel hold Command key

Přečíst si dokument nápovědy

Informace o této verzi

Verze 0.12, 30.10.2019

Hodnocení zákazníků

(28 hodnocení)


Získat technickou pomoc
  • thank you soooooooo much
    Hmd40000 Hmd40000 | května 19, 2020 Ověřené stažení (Co je to?)

    it solved my problem 

  • It works on Catalina!
    Reggev Amsalem | dubna 30, 2020 Ověřené stažení (Co je to?)

    Great improvement!

    I also think adding a controller for the rotation's sensitivity can be great; it's a bit too sensitive for me.

    Thank you.

  • Perfect, now it's smooth as butter!
    Sergey Sitnikov | dubna 27, 2020 Ověřené stažení (Co je to?)


  • Thanks a lot
    alex srv | prosince 08, 2019 Ověřené stažení (Co je to?)

    Very useful

  • It is fantastic - but catalina?
    Steve Tinter | října 30, 2019 Ověřené stažení (Co je to?)

    Will there be an upgrade to allow it to work with MACOS Catalina? After updating tp catalina F360 cannot run this script because it says that it is not signed or something like that. ANyway something to do with catalina.

  • Rotate view doesn't work
    Mark Walters | září 16, 2019

    Love the zoom and pan, but just like someone else mentioned below, rotate doesn't seem to work.

    Holding shift and 2 fingers doesn't do anything.

    I followed the link to your github page (that you replied with to the other person that had this same issue) and installed that version, but same issue.

    I am on Mojave. Please let me know if you have a fix for this issue, and I will gladly update my rating.


    Pravdomil Toman (Vydavatel) | října 01, 2019


  • Sooooo good!
    Marc Wilson | září 06, 2019 Ověřené stažení (Co je to?)

    Fusion 360 should have come this way from Autodesk! Night and day improvment. 

  • Great, with a few hiccups
    Lukin Greg | září 03, 2019 Ověřené stažení (Co je to?)

    Works amazing! But does not work in Drawing workspace.

    And now I can't scroll in Projects pane. Have to drag the bar.

  • Incredible!
    Jakub Kotowicz | července 21, 2019

    Autodesk should use this plug-in as default- it completely changes the feeling of manipulating the camera. Default one is so sluggish it makes you think your computer is slow, when its just Autodesk's gesture recognizer that is so sluggish and unresponsive and with Mac OS built-in recognizer I fly through my designs!

  • great!
    Jungwoo Lee | července 19, 2019 Ověřené stažení (Co je to?)

    this app is simply the best, it just cured my cancer!

    thank you!

  • great!
    Jungwoo Lee | července 19, 2019 Ověřené stažení (Co je to?)

    This app is simply the best, it just cured my cancer!


  • Perfect
    Jacob Jennings | června 19, 2019 Ověřené stažení (Co je to?)

    Thanks. Donated.

  • Much needed!
    Mikhail Mansion | června 09, 2019 Ověřené stažení (Co je to?)

    Thank you. This was such a pain point for me when I needed to model something on my macbook pro without my mouse.

  • OMG
    Garth Snyder | června 05, 2019

    This is wonderful! Been wanting it for a long time...

  • Orbit problem with Trackpad MBP
    Alfred Gatt | května 30, 2019

    Great piece of work! Worked wonders, very fast pan and zoom. However, unfortunately, Shift + 2 fingers will not function and Orbit is a very important function when drawing...  

    Any suggestions pls?

    Thanks a lot

    Pravdomil Toman (Vydavatel) | května 31, 2019

  • Best thing ever
    Jeff Escalante | listopadu 26, 2018 Ověřené stažení (Co je to?)

    You sir, are truly a gentleman and a scholar. My life is a million times better now.

  • Amazing!!!!
    Tom George | října 25, 2018 Ověřené stažení (Co je to?)

    Thanks so much! This makes fusion360 useable on my macbook without a mouse :) :) :) 

  • tried it for five minutes, LOVED IT!
    Jojo Ym | září 24, 2018 Ověřené stažení (Co je to?)

     read title 

  • Thank you so much!
    Todd Sampson | srpna 23, 2018 Ověřené stažení (Co je to?)

    The odd setup of pan and zoom in Fusion 360 was driving me nuts. Your app finally fixed it!! Thank!

    Just bought you a beer using the Paypal link above.

    Pravdomil Toman (Vydavatel) | srpna 24, 2018


  • A fantastic update to the already great trackpad navigation, with one minor issue.
    Max Hazelrigg | července 19, 2018 Ověřené stažení (Co je to?)

    I really like the trackpad navigation in Fusion 360. It is the best CAD navigation on a laptop that I have used and this add-on just makes the motion that much better. Thank you for the great add-in.

    The only small issue I have is I can no longer scroll in the Projects pane. When I move the mouse to the Projects pane on the left side and two-finger scroll, it pans the model view on the right.

    I can still click-drag the scroll bar and I spend a lot more time navigating around a model than I do in the project pane. I'll have to see how (if at all) it affects my workflow.

  • Such a great fix!
    Eric Peralta | června 29, 2018 Ověřené stažení (Co je to?)

    Well done. It even "inverted" the controls for pan back to "normal"



  • A Vast Improvement
    Andy Brice | června 19, 2018 Ověřené stažení (Co je to?)

    This vastly improves the entire experience of using Fusion 360. I don't know how or why Autodesk managed to break trackpad input so badly. (It feels like trying to draw wearing mittens.) But this fixes it completely.

  • Huge improvement
    Andru Vallance | června 16, 2018 Ověřené stažení (Co je to?)

    THANK YOU. It's such an improvement to be able to use the native Mac trackpad gestures.

  • Perfect!
    Carlos Fernandez | března 23, 2018 Ověřené stažení (Co je to?)

    Works 10/10!!!!

  • INCREDIBLE!!! Not just working but huge improvement in function
    Mark Nielsen | března 20, 2018 Ověřené stažení (Co je to?)

    Just want to report that I have it all working now and it is INCREDIBLE!!! I have been using Fusion 360 on my old MBP for 2 years with lousy trackpad function but at least it worked barely. Then I got a new 4th gen MBP 2 days ago and the trackpad gestures for orbit, pan, zoom were terrible. They would get sticky like a dirty mouse ball. Almost unusable. Just got your fix installed and it’s not just workable, it is an incredible improvement. The pan function was the worst before with many swipes needed to get across the model. Now it is perfect. I will be at least twice as productive with this fix. Thank you! Donation coming…

  • Awesome!
    Andreas Ruttkiewicz | ledna 25, 2018 Ověřené stažení (Co je to?)

    What a great improvement to the interface. Thank you.

  • Simply the best!
    Anton Kuptsov | října 03, 2017 Ověřené stažení (Co je to?)

    I mean this is the best thing that happened to my workflow in fusion! I hope you receive my donat.

    Pravdomil Toman (Vydavatel) | října 31, 2017

    Yes, thanks for support!

  • Not working
    Hauk Joakimsen | září 29, 2017 Ověřené stažení (Co je to?)

    All movements make you zoom in, does not work at all.

    Pravdomil Toman (Vydavatel) | října 31, 2017

    hi, update to latest Fusion (there was a bug on Autodesk side) and change your rating please

Přejít nahoru