Spur Gear Creator

Spur Gear Creator

Graham Chow
Bezplatná 30denní zkušební verze, Placené

Operační systém:
Jazyk:

Popis

The features of this gear creator are:

1) You can design a gear that uses a single largest bit to the machine.

2) It can create a pocket so you can easily machine the other side of the gear.

3) It uses the undercut to define the fillet. You can also specify an ellipse for the fillet to give an unusual looking gear.

Přečíst si dokument nápovědy

Informace o této verzi

Verze 1.101, 23.10.2020
Support toolbar. Added in "Spline Point Scale" so you can adjust the number of points of the involute spline at a performance cost. Support spur gear sketch so you can use it for laser cutting. Improved performance on mac os.

Zásady ochrany osobních údajů vydavatele

Snímky obrazovky a videa


Hodnocení zákazníků

(14 hodnocení)

|

Získat technickou pomoc
  • Is this one still able now?
    乔 治 | září 03, 2020 Ověřené stažení (Co je to?)

    Even the system told me it is loaded, but I can't find where to start it? Where is it? Is it expired?


    Thomas Hohlfeld | září 10, 2020

    i found it: construction --> tools --> module


  • Some thing odd happening with lager number of tooth
    Daniel Schmidt | února 27, 2018 Ověřené stažení (Co je to?)

    Hi Patrick, i observe a strange behavior when increasing the number of tooth (i leave all settings as default, but change the teeth number) starting with 3 is normal, passing the 40 tooth the tooth kind of overlap. Also when selecting the contour for CNC milling: the smaller gears work find. The larger gears you have to select edge by edge. thanks for your help Daniel


    Flavio Gioia | prosince 15, 2020

    I do have the same issue, did you find a solution?


  • Sketch Missing
    Patrick Edwards | února 02, 2018 Ověřené stažení (Co je to?)

    Initial sketch missing from the gear profile


    graham chow (Vydavatel) | února 05, 2018

    Hi Patrick, this is as designed. Maybe in a future release, it can be supported.


  • Decu
    Patrick Vanquelef | ledna 12, 2018 Ověřené stažení (Co je to?)

    J'ai le même problème que Carsten Müller . Cela ne fonctionne pas correctement et plein d'extrusion en jaune dans le timeline. Merci de votre réponse


  • Great!
    Patrick Pronovost | července 18, 2017

    i needed to make a replacement gear for a RC toy and it was a snap to make with this I am more then happy buying it knowing it works and will be useful when I need it next.


  • OD locked up in the menu.
    Jocelyn Sicotte | května 28, 2017

    You cannot make a gear of a specified OD outside diameter. The OD is fixed based on the parameters you insert. NOT nice.


    Angus Young | ledna 11, 2018

    Outer diameter is determined by several variables, it's not stated explicitly when designing a gear. I would suggest you watch this video. https://www.youtube.com/watch?v=ZakT54JIhB8


  • I'm Sure It's Great But,
    Colton Tshudy | května 05, 2017

    I'm not able to use this addon because C++ Add-Ins don't work for some reason. If anyone knows a fix please drop a reply.


  • good add-on, would be amazing if...
    Brian Greeson | února 03, 2017 Ověřené stažení (Co je to?)

    Thank you for creating this add-on, very useful. Having the ability to select a standard profile (GT2, GT3, MXL, etc.) would make this awesome for creating pulleys too.


  • Small improvement
    Joe Dohm | listopadu 14, 2016

    It would be great if a note was made of the settings used to create a gear


  • Great App
    Raymond Yuhasz | července 08, 2016 Ověřené stažení (Co je to?)

    Hi Graham, I love the app, very helpful. Is there a possibility to add an internal gear option....such as the ring gear in a planetary gear set? Thanks!


    Alexander Wigen | října 26, 2016

    Yes please add the ability to make internal gears!


  • align Gears
    Isak Thjellesen | června 10, 2016

    Would it be possible for you to add contact point circle. It would be extremely useful to align the Gears up.


    graham chow (Vydavatel) | června 11, 2016

    yes, will do in the next update


  • Nice tool but
    Carsten Müller | května 20, 2016

    it removes the sketches leaving a bunch of yellow extrudes in the time line.


    graham chow (Vydavatel) | května 26, 2016

    I see the issue. I should be able to fix it up in an update.


  • Great For Quick Laser Cutting and Rapid Prototyping
    Ashley Hartwell | dubna 30, 2016

    Program is really simply to use, one must simply specify pitch, pressure angle, and and teeth number and Fusion 360 does the rest. I do wish there was a toggle feature for english unit gears


    graham chow (Vydavatel) | května 02, 2016

    It does use the units that you specify in the browser part of the document - section 5 (http://fusion360.autodesk.com/learning/learning.html?guid=GUID-E647CA56-7187-406A-ACE4-EAC59914FAE4). However you would need to reopen the add in.


  • Good
    Mike Geyer | dubna 28, 2016

    Good

Přejít nahoru