Custom Screw Creator

Custom Screw Creator

Fabian Schurig
Zdarma

Operační systém:
Jazyk:

Popis

You can define your customized screw with the following Parameters:

Screw Name: Name of the Body

Head Diameter: Diameter of the cylinder head

Body Diameter: Diameter of the body shaft

Head Height: Height of the cylinder head

Body Length: length of the body shaft

Hexagon Diameter: Diameter of the inner Circle of the hexagonal polygon

Hexagon Height: Height to cut the hexagon from the cylinder head

Fillet Radius: Radius of all fillets

Thread Length: length of the thread

Chamfer Distance: distance of the 45degree chamfer on the body shaft

 

Or select preset values.

 

Přečíst si dokument nápovědy

Informace o této verzi

Verze v1.3.1, 04.08.2020
v1.3.1 - Fixes https://github.com/Bitfroest/CustomScrews/issues/5 - Works with Fusion 360 Version 2.0.8624 (2020-07-25) v1.0 - initial MacOS version

Snímky obrazovky a videa


Hodnocení zákazníků

(16 hodnocení)

|

Získat technickou pomoc
  • Looks good but won't open in Fusion 360?
    Samuel Husband | června 26, 2020 Ověřené stažení (Co je to?)

    I have downloaded it but it won't load when i select it in Fusion 360? 


  • Unable to start plug-in
    Michael Smolek | června 02, 2020 Ověřené stažení (Co je to?)

    It is listed in the Plug-Ins drop-down menu, but nothing happens when the run button is enabled. Also, there is no start button listed under the Insert or Create menus. Enabling run at startup seems to do nothing.


    Sascha B. | června 11, 2020

    same here, I am installing the Plug, find it and press run. But nothing happen


  • I have installed successfully, but can not run
    肖 军 | května 26, 2020 Ověřené stažení (Co je to?)

    I am using the education version, is it missing the relevant documents?


  • The plugin does not start
    Alexander Afeldt | května 21, 2020 Ověřené stažení (Co je to?)

    После установки плагин появляется в диспетчере плагинов, но он не запускается и меню для вставки болтов не появляется.


  • still cant define a size of thread
    Paul Elliott | ledna 24, 2020 Ověřené stažení (Co je to?)

    hi am i missing something as looking at the plugin you can still only pick a define thread from the section IE 10mm 4mm 6mm i need to make a thread that is 19mm so being able to put that value in or select it would help more thanks 


  • Does not run...
    Dany Syrbu | ledna 24, 2020 Ověřené stažení (Co je to?)

    Hi, I read that the plugin has beed updated, but, I still can't run it.

    There is updated version here, but it still does not run, could u help me?


  • Addon will not run after 2019 September update
    Aaron Kagarice | prosince 18, 2019 Ověřené stažení (Co je to?)

    Mathias Kern | ledna 23, 2020

    Same here. Would be nice to use it but it looks like it is not. @Support Any help?


    Fabian Schurig (Vydavatel) | ledna 23, 2020

    Hello Aaron and Mathias Thanks for the review. I did an update and it was already sent in for submission on 05-01-2020. Currently the status is pending and I am waiting for Autodesk to finally publish it. Since this process seems to be outsourced to India on the Autodesk end it is a tedious process. You can get the latest version on GitHub https://github.com/Bitfroest/CustomScrews/releases Thanks in advance! Best Fabian


  • Sehr hilfreich
    Sebastian Sichelschmidt | října 20, 2019 Ověřené stažení (Co je to?)

    ( ͡° ͜ʖ ͡°)


  • Nice
    Eva Vedel | srpna 08, 2019 Ověřené stažení (Co je to?)

    Thank you !


  • Gracias
    Neaitinse Neaitinse | března 09, 2019 Ověřené stažení (Co je to?)

    :D Muchas gracias.


  • Kruto!
    Artem Pylaev | ledna 24, 2019

    Please, make it for macos


  • nice,but would be better with more features
    J Jones | července 22, 2018 Ověřené stažení (Co je to?)

    I would like to sugest adding in American Standard thread sizes.  it would also be nice to chane the cap to philips head. and an option to model the threads on the compnent.


  • Thanks
    Sergey Bob | července 22, 2018

    Great creator ! Thanks !!!


  • nice
    Zoltán Tolmács | ledna 31, 2018 Ověřené stažení (Co je to?)

    Good job! Is there any way to delete the center screw before the others are created? If I have material in the center, it cuts the first screw into my design.


    Fabian Schurig (Vydavatel) | srpna 01, 2018

    Thanks for your comment! First screw now gets hidden.


  • Perfect
    Christophe Pochari | listopadu 24, 2017 Ověřené stažení (Co je to?)

    Great plug in


  • Hilfreiche App
    André Pereira | listopadu 10, 2016 Ověřené stažení (Co je to?)

    Die App ist einfach strukturiert und kann leicht bedient werden. Achtung: keine Parameter per maus ändern, da sonst massenweise Fehlermeldung kommen!


    Fabian Schurig (Vydavatel) | srpna 01, 2018

    Vielen Dank für den Hinweis. Mit dem neuen Update sollten fast alle Fehler behoben sein.

Přejít nahoru