Operační systém:


Sometimes it can be difficult to identify at which point the sketch is not properly closed, and so it cannot be used as a profile for solid creation, e.g. Extrude.

This add-in tries to help with that problem by identifying curves that do not connect to other curves leaving the loop open.

Informace o této verzi

Verze 1.2.0, 18.01.2019

Updated to support latest version of Fusion 360

Snímky obrazovky a videa

Hodnocení zákazníků

13 hodnocení
Získat technickou pomoc
  • Awesome
    SKIOLD NINO | března 19, 2021 Ověřené stažení (Co je to?)

    Really helpful. Thanks.

  • doesn't do anything...?
    Hannah Kissick | prosince 05, 2020 Ověřené stažení (Co je to?)

    I have a sketch with snowflake shapes that came in all "exploded", as in hundreds of lines which aren't actually connected, making it impossible to extrude or trace operation. when this plugin is ran, nothing happens. no warnings, no popups, just... nothing happens. it did give an error when I didn't have the sketch active, so that made sense. but when sketch is active it won't run.

    Adam Nagy (Vydavatel) | prosince 08, 2020

    This page has a link "Read Help Document" with more information about this app: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=8050506996211430178&;appLang=en&os=Mac The app will just simply select/highlight the sketch points of the curves that are not connected. So please make sure no geometry is selected in the sketch before running it so the result will be more obvious.

  • Super
    Abbo Bx | října 30, 2020 Ověřené stažení (Co je to?)

    Great add-in, works very well, thank you for sharing your job!

  • Please
    moon young Kim | ledna 06, 2020

    Please publish a Win64 version of this app!

    Daniel Hops | září 23, 2020

    Yes, please!

    Steve Hesby | prosince 05, 2020


  • Works perfectly
    Carl Smith | září 19, 2019 Ověřené stažení (Co je to?)

    Thank you - this saves so much time.

    james | února 18, 2019 Ověřené stažení (Co je to?)

    It was only a simple loop but it had over 50 elements.. finding this add on just saved me half an hour. soo quick, will be using this in the future :)

  • Super Useful!
    Tom Johnson | února 05, 2019 Ověřené stažení (Co je to?)

    Worked exactly as advertised.  Thank you!

  • Thank!
    Django Soeterboek | listopadu 16, 2018 Ověřené stažení (Co je to?)

    Saved me a lot of time correcting a imported dxf!

  • perfect !
    Zoltan Toth | prosince 13, 2017 Ověřené stažení (Co je to?)

    Save my life sometimes when I spend hours to find tiny errors .... :p

  • Wow!
    Jeffrey Hedrick | prosince 02, 2016 Ověřené stažení (Co je to?)

    I have only tried on simple examples but if this works without crashing, it will be one of the best plug ins imaginable. Thanks for working on this great feature!!!!

  • It crashed program twice, sometimes it works
    Nathaniel Price | října 30, 2016 Ověřené stažení (Co je to?)

    Sometimes it works ok, but on two separate occasions it crashed program

    Adam Nagy (Vydavatel) | října 31, 2016

    Hi Nathan, Could you please contact us on the support email (fusion.apps@autodesk.com) and provide more info about when exactly the program crashes? Maybe the error message that pops up - if any? Thank you, Adam

  • Very useful
    Dmitry Zaprudnov | července 12, 2016 Ověřené stažení (Co je to?)

    It will be great to see more functions in this app, but however even now it really makes life easier.

  • Big thank's
    Peter Böker | května 22, 2015 Ověřené stažení (Co je to?)

    This add in is very helpful in cases where the gap's are very small.

Přejít nahoru