Parameter I/O

Parameter I/O

Autodesk, Inc.
Kostenlos

Betriebssystem:
Sprache:

Beschreibung

Enables the user to Import/Update parameters from or export them to a CSV (Comma Separated Values) file. When importing/updating parameters from a CSV file the data in it needs to be in a specific format: <parameter name>, <unit>, <value>, <comment>

 

The easiest way to make sure your CSV file follows the correct format might be to first export the parameters into a file and then have a look at its content - the import will require the data in the same format. 

 

When importing parameters from a file, if a parameter with the given name already exists, then its unit, value and comment will be updated, otherwise a new user parameter will be created with the provided values.

 

When exporting parameters to a file, all available parameters will be exported, not just the user parameters. 

Hilfe lesen

Informationen zu dieser Version

Version 1.2.0, 24.09.2018
Added support for unitless Model Parameters and commas in the Parameter Comments

Screenshots und Videos


Kundenbewertungen

(23 Bewertungen)

|

Technische Hilfe erhalten
  • "" must be replaced with " "
    Ulan Mcknight | Oktober 12, 2019 Geprüfter Download (Was ist das?)

    After exporting to a file, before I can import the file to a new design, I must first replace all insances of "" with " ".

    Love this plugin!


  • Problem with inches
    Rsworden59 Rsworden59 | Juni 15, 2019 Geprüfter Download (Was ist das?)

    When the Units are inches, decimal numbers export OK. Fractional numbers display in Fusion 360 with a double-quote mark for inches. They export as a string enclosed by double quotes, so the resulting string has an odd number of double quotes.

    If I try to import such a file, it fails with an error message.

    If I try to import it into Excel to manipulate it, Excel makes various mistakes.

    So if working in inches, and intending to import, I must work only in decimals.


  • Good Functionality But Slow
    Eric Lau | März 15, 2019 Geprüfter Download (Was ist das?)

    This plugin functions well for me but it runs really slow when importing my csv containing a couple hundred parameters. I find that it takes 5-10 mins for the parameters to load but as long as I am not in a rush it works ok. At first I thought it was because my model was taking a long time to rebuild but the performance is similar if I roll back the history bar to the begining where there are no features. 

     

    Any advice on how to speed things up would be appreciated. 


  • Works pretty good - except calculations
    Markus Flaig | März 05, 2019 Geprüfter Download (Was ist das?)

    It works pretty well, unfortunately the import failes when calculated parameters are exported.

    "4mm + (parameter1 * 2)" for example does not work. This is quite a pain to keep track of manually.


  • Order very important
    Curtis Slaten | Februar 06, 2019 Geprüfter Download (Was ist das?)

    I'm new here, but this might help.  I exported my parameters from a project that I had assigned a few "Favorite" parameters to.  That meant that they were at the top of the CSV file when it exported.  I then imported them into another project and got parsing errors.  The "Favorite" parameters were referencing other parameters down lower on the list.   I used a text editor to reorder the CSV file and the import went great.

    This app helped me a great deal.  


    Ulan Mcknight | Februar 25, 2019

    Yes! And the final column where you define the value of your comments must have something in it. My text editor opened it as "". I searched and replaced with " " and all is fine. I save all my formulas down at the bottom of the .cvs file in order to sure that the variables used in them have been previously defined. This is an amazing add on.Thank you!


  • Simple but good
    Felix Blix Everberg | Dezember 12, 2018 Geprüfter Download (Was ist das?)

    It axported all parameters, not just the user parameters, and imported them as user parameters, but did so without a hitch, and it was easy to delete the extra parameters.

    I wanted to clean up an old parametric design bottom up. Using this I could copy all the parameters to a new file easily


  • Great Plugin - Possible Bug Found
    William Urinoski | November 11, 2018 Geprüfter Download (Was ist das?)

    Hi Adam,

    Thanks for the great plugin - However, I seem to have found a bug. When the Expression field of a Parameter contains a formula/equation like "BaseLength - ( CameraRampFrontOffset + cameraRampRearOffset )" the Python script chokes and stops importing - but in Notepad it looks like the exported CSV is valid and correct. Also, I can open an exported CSV with several of theses complex Expressions and their contents appear in the correct spreadsheet columns.

    I'm surprised that AutoDesk hasn't picked up on this great idea, it would be a great for AutoDesk to fully support parameters in a library with named groups of params. Maybe also implementing an include verb or a series of includes in a parent parameter list. Like C, Java, etc.

    Thanks to you, though, we have this great tool in the meantime.

    Thanks again!


    Adam Nagy (Herausgeber) | Januar 03, 2019

    Please submit your request on the Fusion 360 IdeaStation: https://forums.autodesk.com/t5/fusion-360-ideastation/idb-p/125 Could the issue be one the these: https://modthemachine.typepad.com/my_weblog/2016/12/parameter-io-issues.html


  • Good Start, but....
    Rojer Wisner | November 05, 2018 Geprüfter Download (Was ist das?)

    Initial thoughts - THANK YOU!

    Now - why don't I see the NAMES I gave the parameters?
    Maybe I did something wrong (clicked on the wrong side of "NO" (=Export) and then clicked on the wrong side of "YES" (=Import).

    That in and of itself is odd - can't rename the buttons to "Import" and "Export" instead of "Yes" and "No"?

    It's an excellant start but seems as if it might be an 80% fullfilment.

    But Thank you.


    Adam Nagy (Herausgeber) | November 06, 2018

    Glad you like it! :) These samples were the very first ones to kick off the App Store and their main purpose was to show the capabilities of the API. It's open source, and you're welcome to modify it as you wish :)


  • Little buggy, but great plugin
    Daniel Kitchen | November 03, 2018 Geprüfter Download (Was ist das?)

    I tried to import parameters I just exported from another file, but it kept throwing exceptions. I found the issue, you cannot have an expression reference a parameter.

    Example of when error is thrown:

    "dimension_1","in","1.5 in",""

    "dimension_2","in","dimension_1",""

    However, if the parameter is operated on while achieving the same result, it imports without errors:

    "dimension_1","in","1.5 in",""

    "dimension_2","in","dimension_1+dimension_1-dimension_1",""


    Adam Nagy (Herausgeber) | November 06, 2018

    Tested those exact parameters and it seems to work for me: http://www.youtube.com/watch?v=lKpALd_Ys7E


  • Exporting
    Dakota Bowman | September 10, 2018 Geprüfter Download (Was ist das?)

    Im tring to export an airfoil (2D) into a csv to compare with xfoil. I am getting errors and it is not a parametric design. How can I fix this?


  • Wonderful!
    W.P. Ginfo | August 24, 2018 Geprüfter Download (Was ist das?)

    Just what I needed!!
    Thnx,

    Willem


  • Perfect!!!!
    Johannes Mã¼hlbach | Juni 25, 2018 Geprüfter Download (Was ist das?)

    Thank u so much!

    This is exactly what i needed!


  • Very usefull
    Valsua Valsua | Juni 07, 2018 Geprüfter Download (Was ist das?)

    Many many thanks! Essential working with more versions of the same project and you want to synchronise parameters in all.


  • I can't import .csv file! Help! [Fixed]
    Daniel Kim | April 06, 2018 Geprüfter Download (Was ist das?)

    Thank you for providing the functionality you really need. I tried to load a .csv file today. The following error appears. I want you to know how to solve it.
    Addin Stop Failed: Traceback (most recent call last ) : "C:/user/henry/appdata/roaming/autodesk/applicationPlugins/ParameterIO.bundle/Contents/ParameterIO.py", line 226, in readTheParameters
        commentOfParam = row[3]
    IndexError : list index out of range

    ---------
    Thank you i fixed!

    Have to fill in comment low. I didn't fill in before, so i had error.


    Dustin Foster | September 11, 2018

    Thanks, Daniel. This saved me some time!


  • thanks for adding parameter sharing
    D Clark | Januar 06, 2018 Geprüfter Download (Was ist das?)

    without this the parameters capability in F360 is pretty meaningless. great to be able to share parameters between sketches. helps maintain uniform naming. i have a general purpose csv for each design that i use with shopbot. fantastic!


    Shawn Doughtie | Januar 19, 2018

    The parameters capability might seem meaningless without this, but once you consider the parameters as global variables, you can see how useful the capability is. For example, I'm working on a model featuring four holes bored in a surface in a rectangular pattern, and each hole has a diameter, x position, and y position. There are four sketches that feature these holes by themselves, so that makes 4 sketches * 4 holes * 3 dimensions, so if you had to change all of the bores, you'd have to make 48 separate modifications. Using parameters to size and position the bores, you only have to modify the three parameters (and you won't inadvertently miss one).


  • doesn't work now
    Christopher Moll | Januar 01, 2018 Geprüfter Download (Was ist das?)

    errors are thrown when importing


    Ian Syndergaard | Januar 14, 2018

    Are you trying to share parameters between different files? If so, these errors are likely because some of your model's automatically generated Model Parameter names will be the same as some of the Model Parameter names you are uploading, causing your model to change those values to the uploaded ones. Try opening up the CSV file in Notepad and deleting everything except for the User Parameters.


    Christopher Moll | Januar 26, 2018

    @Ian Syndergaard No I use it to only adjust parameters in current model. The add in doesn't export or import the data correctly. It clumps it all in one row in the csv. file.in excel. It looks correct in notepad except there are extra commas being added for some reason.


  • Value Parameter
    Nick Hemer | November 28, 2017 Geprüfter Download (Was ist das?)

    This is a great add in for what I want to use Fusion for. Is it possible to include the 'Value' Parameter in the CSV file, or replace the 'Expression' Parameter with the 'Value' Parameter?


    Adam Nagy (Herausgeber) | Dezember 11, 2017

    I'm glad you like this sample add-in. I don’t think it will be updated in the near future to include this functionality. :( However, the source code is available with the add-in and you are welcome to modify it as you wish.


  • almost extremely perfect
    Lander Pinson | Dezember 01, 2016 Geprüfter Download (Was ist das?)

    this is an amazing tool of you want to have weird measurements like i do, and experiment with them. My only question: would it be possible to rearrange the list of parameters (now the added parameters are just chronologically, and if you add one later, that one cannot be put in the row and that becomes inconvenient when copy pasting the values in the cvs file... ) or is that a question for the Change Paramters plugin...


  • Auto-update
    Tomasz Zając | November 28, 2016 Geprüfter Download (Was ist das?)

    Is it possible to auto-update project without opening it?


    Adam Nagy (Herausgeber) | November 29, 2016

    Could you be a bit more specific on what exactly you'd need? You mean updating parameter values from a CSV file automatically?


    Tomasz Zając | November 30, 2016

    Yes, Without clicking 'Import CSV' inside I/O Parameters Script. Something that will work like linked to CSV file and updating model parameters real time when I will change its.


    Franklin Li | November 19, 2018

    Was this ever resolved? Or an explanation given on how it could be done?


    Adam Nagy (Herausgeber) | November 20, 2018

    Without manually running a command? >> yes. Without opening the Fusion 360 project? >> no. In case of the former you would need to create a program that keeps checking the csv file or registers for a system event about file updates on the system (depending on which OS and programming language you use it can be done differently) and when that happens you read it again and update the parameters in the Fusion model


  • Great plugin, But.
    Matthew Curran | Juni 03, 2016 Geprüfter Download (Was ist das?)

    This is a wonderful plugin that will really help me out because sometimes I am dealing with close to 200 user parameters. But it would not accept an expression that uses other parameters to calculate a value. This is huge for me since a lot of my parameters are used this way. If it is not too difficult to add that in it would be great!


    RC DrCola | Oktober 13, 2016

    This functionality is (or can be) implemented, but it is within Fusion 360 itself. The parameters will just update accordingly. There are great tutorials on YouTube, but in a very simple way; you could have dimensions accept other dimensions as values and use math expressions on those. The result would be automatically shown in the parameters window as a dimension value. EX: Say d1 =10 and d2 =30, then d3 = d1+d2 which will show 40 as the value. Alternatively, use Excel to crunch the numbers and import the results.


  • This adds a lot of higher-end-CAD functionality
    Konstantinos Froudarakis | Mai 08, 2016 Geprüfter Download (Was ist das?)

    An excelent plug in, running very reliably. The only requirement is that the .csv file you input has the variables in the correct format, which is very easy to make sure, since you can just make the variables in Fusion, export and then start tweaking. Super easy, and EXTREMELLY helpful. Big "Thank You!!!" to the creator. P.S. OCD moment here. The only issue I have is that I'd like the icon to go away fromt the main toolbar (next to the redo), since I have it in the modify toolbar anyway.


    Adam Nagy (Herausgeber) | Mai 11, 2016

    The latest release 1.2.0 solves that and does not place an icon in the Quick Access Toolbar (QAT)


  • Immediately threw exception
    Jeff Peterson | März 04, 2016 Geprüfter Download (Was ist das?)

    Throws a runtime error InternalValidationError: pComplexUnit when I try to export my parameters.


    Adam Nagy (Herausgeber) | Mai 11, 2016

    The latest release 1.2.0 solves that.


  • Great plugin.
    Neal Wallace | November 07, 2015 Geprüfter Download (Was ist das?)

    I find when I use Undo/Redo it affects the parameters as well. This plugin allows me to quickly save and load parameters.

Nach oben